75 Watt Mean Well LED Driver | CEN-75-24
The CEN-75-24 is a practical choice for powering 24 volt LED systems up to 75 watts in commercial and industrial settings, thanks to its wide 100V-277V input range that matches standard building power without extra transformers. Its IP65 rating and UL listing mean it can be installed in wet, dusty, or washdown-prone areas – such as food processing spaces, outdoor enclosures, and warehouses – without additional protective housing. The constant voltage output ensures reliable operation for LED strips, modules, or sign lighting, and the 3 year warranty provides added assurance for long-term use in demanding environments.
Dwayne Kula | President, CTO and Founder
43 in stock
Product Specifications
Key Features
| Brand | Mean Well |
| Watts | 75 |
| Voltage | 100V-277V |
| Output Voltage | 24Vdc |
| Dimensions (in) | 9.41 in X 7.13 in |
| Operating Temp | 32°F to +122°F |
| Frequency | 50/60 Hz |
| IP Rating | IP66 |
| Dimming Method | Manual Screwdriver Adjustment |
Product Overview
The Mean Well CEN-75-24 is a 75-watt LED driver with a 24Vdc output. It is used for fixture repair and replacement where the existing fixture requires a compatible 24Vdc driver.
The driver accepts 100-277V input at 50/60 Hz and has an IP66 enclosure rating for wet locations. Its operating range is 32 F to +122 F.
Core Performance and Output
This driver provides 75 watts of output capacity at 24Vdc. Input voltage is 100-277V AC, allowing use on common commercial voltage systems within that range.
Driver efficiency is not stated in the supplied data. Beam distribution and light output depend on the connected fixture and LED load, not the driver itself.
The 75-watt rating must match the electrical requirements of the fixture being serviced. A driver does not establish fixture spacing, mounting height, or photometric performance.
Adjustability and Control Options
Output adjustment is performed manually with a screwdriver. This adjustment method is intended for fixture-level setup and service work.
No remote dimming protocol, sensor control interface, or networked control capability is stated in the supplied data. Confirm the existing fixture wiring and required output setting before installation.
Longevity and Reliability
The IP66 enclosure is rated for wet locations. This supports use where the driver enclosure may be exposed to water or dust under the conditions covered by its rating.
The stated operating temperature range is 32 F to +122 F. Installation conditions should remain within that range.
Build Quality and Physical Characteristics
The driver measures 9.41 inches by 7.13 inches. Verify available enclosure space and access for wiring and screwdriver adjustment before installation.
This is a 75-watt Mean Well driver with 24Vdc output. Physical fit and electrical compatibility must both be confirmed during fixture repair and replacement work.
Where This Product Fits Best
This driver fits maintenance and repair work involving compatible 24Vdc LED fixtures. It is intended for replacement, retrofit, and emergency-support work where the fixture design accepts the stated electrical characteristics.
- fixture repair and replacement
- lighting maintenance support
- field repair projects
- retrofit support
- emergency backup integration
- emergency egress support
The IP66 rating supports wet-location installation conditions. The driver must remain within its stated temperature range and be installed in a location that accommodates its physical dimensions.
Installation and Long-Term Use
Installation requires verification of the 100-277V input supply, 24Vdc output requirement, and 75-watt driver capacity. The connected fixture must be compatible with manual screwdriver adjustment.
Mounting height is determined by the host fixture and is not established by the supplied driver data. Long-term service work should retain access to the driver for inspection, wiring service, and output adjustment.
How This Fixture Is Commonly Used
This driver is commonly used during fixture repair and replacement, lighting maintenance support, and field repair projects. It is installed as part of the fixture assembly rather than as a standalone lighting unit.
Fixture layout and spacing remain unchanged unless the repair project also changes the fixture or LED load. The existing fixture mounting height and placement determine the lighting result.
Safety, Certifications, and Warranty
This driver is UL certified.
The enclosure is IP66 rated for wet locations. Warranty information is not provided in the supplied product data.
Frequently Asked Questions
Q: What is the output voltage of the CEN-75-24 driver?
A: The driver provides 24Vdc output.
Q: What input voltage does this driver accept?
A: The input range is 100-277V AC at 50/60 Hz.
Q: How is the output adjusted?
A: Output adjustment is made manually with a screwdriver.
Q: Is this driver rated for wet locations?
A: Yes. The enclosure is IP66 rated for wet locations.
Application Questions and Clarification
Q: What should be confirmed for fixture repair and replacement?
A: Confirm that the fixture requires 24Vdc output, accepts a 75-watt driver, and operates from a 100-277V AC input supply.
Q: Can this driver be considered for retrofit support?
A: Yes, where the existing fixture electrical requirements match the stated 75-watt capacity, 24Vdc output, and 100-277V input range.
Q: What affects placement of a fixture using this driver?
A: Fixture mounting height, layout, and light distribution are determined by the host fixture. The supplied driver data does not establish spacing or coverage values.
Web ID: 1720
