100 Watt Mean Well LED Driver | HLG-100H-24A
The HLG-100H-24A is a practical choice for powering 24-volt DC LED systems in commercial and industrial settings, thanks to its wide 100V-277V input range and 100-watt output, which simplifies compatibility across different facility power supplies. Its IP65 rating is valuable for installations exposed to dust or water spray, such as food processing areas, outdoor canopies, and car washes, where environmental protection is essential for long-term reliability. The UL listing addresses safety requirements, and the 3-year warranty provides added assurance for maintenance teams seeking dependable operation in demanding environments.
Dwayne Kula | President, CTO and Founder
Out of stock
Product Specifications
Key Features
| Brand | Mean Well |
| Watts | 100 |
| Voltage | 100V-277V |
| Output Voltage | 24Vdc |
| Dimensions (in) | 9.41 in X 7.13 |
| Operating Temp | 32°F to +122°F |
| Frequency | 50/60 Hz |
| IP Rating | IP65 |
| Dimming Method | Manual Screwdriver Adjustment |
Product Overview
The Mean Well HLG-100H-24A is a 100-watt LED driver that converts 100-277V AC input power to 24V DC output for compatible LED fixtures. It supports fixture repair, replacement work, and retrofit support where the existing fixture requires a 24V DC driver.
This driver is IP65 rated for outdoor installation and harsh environments. Output adjustment is completed manually with a screwdriver.
Core Performance and Output
The driver operates from 100-277V AC at 50/60 Hz and provides 24V DC output at up to 100 watts. It is intended for fixtures designed around this input and output configuration.
Manual screwdriver adjustment allows output adjustment during commissioning. The connected LED load must remain within the driver’s 100-watt output capacity and match its 24V DC output requirement.
Adjustability and Control Options
This driver uses manual screwdriver adjustment. Adjustment is performed at the driver rather than through a wall control, sensor, or networked lighting control.
Set the output during fixture repair, retrofit support, or commissioning work. Final adjustment should match the requirements of the connected LED fixture.
Longevity and Reliability
The HLG-100H-24A is rated for operation from 32 degrees F to +122 degrees F. Its IP65 rating supports use where the driver is exposed to outdoor environmental conditions.
Long-term reliability depends on matching the driver to the fixture’s electrical requirements and keeping the installation within the stated operating temperature range.
Build Quality and Physical Characteristics
This Mean Well driver measures 9.41 inches by 7.13 inches. Confirm available enclosure or fixture space before replacement work begins.
The IP65-rated housing is suited to installations requiring protection from dust and water exposure. Physical placement must allow access for manual screwdriver adjustment when needed.
Where This Product Fits Best
This driver fits maintenance and retrofit work involving compatible 24V DC LED fixtures operating from 100-277V AC power. It is used where an existing driver requires replacement or where emergency and maintenance-related fixture work is being completed.
- fixture repair and replacement
- lighting maintenance support
- retrofit support
- emergency backup integration
- field repair projects
- service stock for maintenance teams
IP65 construction supports outdoor installation and harsh environments. Operating temperature remains limited to 32 degrees F through +122 degrees F.
Installation and Long-Term Use
Verify the fixture input voltage, 24V DC output requirement, load, and available mounting space before installation. Disconnect power before driver replacement or adjustment.
Mounting location is determined by the host fixture or enclosure. Inspect wiring connections and driver condition during scheduled lighting maintenance support.
How This Fixture Is Commonly Used
This driver is commonly installed during fixture repair and replacement work when a compatible LED fixture has a failed or damaged driver. In retrofit support and field repair projects, the driver is placed within the fixture or its existing driver compartment when physical space allows.
Mounting height follows the location of the host fixture rather than the driver itself. Layout and fixture spacing are not controlled by the driver; the connected fixture’s output and project lighting plan determine those conditions.
Safety, Certifications, and Warranty
This driver is UL certified. It is IP65 rated.
Operate the driver within its stated 100-277V input range, 24V DC output configuration, 100-watt capacity, and 32 degrees F to +122 degrees F operating range.
Frequently Asked Questions
Q: What input voltage does the HLG-100H-24A accept?
A: The driver accepts 100-277V AC input power at 50/60 Hz.
Q: What is the output voltage of this driver?
A: This driver provides 24V DC output.
Q: How is output adjusted?
A: Output adjustment is completed manually with a screwdriver.
Q: Is this driver rated for outdoor installation?
A: The driver is IP65 rated and suitable for outdoor installation and harsh environments.
Application Questions and Clarification
Q: Can this driver be used for fixture repair and replacement?
A: Yes, it supports fixture repair and replacement when the connected fixture requires 24V DC output and operates within the driver’s stated electrical limits.
Q: What should be confirmed for retrofit support?
A: Confirm the fixture’s input voltage, required 24V DC output, connected load, and available space for the 9.41-inch by 7.13-inch driver.
Q: Does this driver support lighting maintenance support in outdoor conditions?
A: The IP65 rating supports outdoor installation and harsh environments. The operating temperature must remain between 32 degrees F and +122 degrees F.
Web ID: 2159
