25 Watt Emergency Driver | Emergency Battery Backup Supply

Product Overview

This 25 watt emergency driver converts compatible LED fixtures into emergency backup units. The driver installs alongside existing UFO LED high bays and other dimmable LED fixtures up to 200 watts, providing 90 minutes of emergency lighting when power fails.

The unit accepts 100V-277V or 347V input at 50/60 Hz, covering standard commercial and industrial voltage ranges. It works with fixtures using 0-10V or 1-10V dimming protocols and remains compatible with wall switches and motion sensors already in the circuit.

Physical dimensions are 5.5 inches in diameter by 6.8 inches in height, with a weight of 3.96 lbs. The driver delivers constant output power during emergency operation and includes self-testing capability.

Where This Product Fits Best

This emergency driver is intended for facilities that need to add emergency egress or backup lighting capability to existing LED high bay installations. It fits applications where replacing fixtures entirely is impractical or where emergency coverage needs to be added selectively across a space.

The 347V option addresses Canadian electrical standards and higher-voltage industrial systems. The IP65 rating allows installation in areas exposed to dust, moisture, or washdown conditions where enclosed fixtures are already in use.

Performance and Functional Considerations

The driver delivers 25 watts of constant output during emergency mode, which provides enough light for safe egress and basic task visibility rather than full operational illumination. The 90-minute runtime meets standard emergency lighting duration requirements for most commercial applications.

Recharge time is 24 hours after a full discharge. In facilities with frequent power interruptions, this recharge window should be factored into overall emergency lighting planning. The self-testing function reduces manual inspection burden for ongoing compliance verification.

Compatibility requires the host fixture to be dimmable using 0-10V or 1-10V protocols. Non-dimmable fixtures will not work with this driver.

Installation and Long-Term Use

The driver installs externally and connects to compatible LED fixtures up to 200 watts. The 3.96 lb weight and compact form factor allow mounting in existing junction boxes or adjacent to the fixture housing, depending on site conditions.

IP65 construction protects internal components from dust ingress and water jets, supporting installations in processing areas, covered outdoor locations, and environments with elevated humidity or particulate exposure. The driver does not require climate-controlled mounting locations.

The 5-year warranty covers the driver under normal operating conditions.

How This Fixture Is Commonly Used

Facilities typically add this driver to high bays in aisles, stairwells, loading docks, and exit paths where emergency illumination is required but full fixture replacement is unnecessary. The self-testing function allows maintenance personnel to verify battery health without manual activation or scheduled inspections.

Because the driver works with existing motion sensors and wall switches, it integrates into spaces where automated lighting control is already in place. During normal operation, the fixture behaves as expected. During a power loss, the driver takes over and delivers reduced output until power returns or the 90-minute runtime expires.

Safety, Certifications, and Warranty

This emergency driver is UL listed. The IP65 rating allows use in wet and dusty environments where direct water spray and airborne particles are present.

We provide a 5-year warranty on this product.

Frequently Asked Questions

What voltage does this emergency driver accept?
The driver accepts 100V-277V or 347V input at 50/60 Hz.

What fixtures is this compatible with?
It works with dimmable LED fixtures up to 200 watts that use 0-10V or 1-10V dimming protocols.

How long does the emergency backup last?
The driver provides up to 90 minutes of emergency lighting on a full charge.

How long does it take to recharge?
Full recharge time is 24 hours.

Is this driver rated for wet or dusty locations?
Yes. The IP65 rating allows installation in areas exposed to dust and water spray.

What certifications does this product carry?
This emergency driver is UL listed.

What is the warranty period?
We provide a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.