18 Watt Wall Pack Battery Backup | 90 Minute Backup | 100-277V | 347V
Dwayne Kula | President, CTO and Founder
269 in stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Watts | 18 |
| Voltage | 100V-277V or 347V |
| Dimming | 0-10V or 1-10V |
| Mounting | Wall |
| Frequency (Hz) | 50 / 60 hz |
Durable Construction
| Housing | Die-Cast Aluminum |
| IP Rating | IP65 |
| Certifications | UL |
| Warranty | 5 years |
Measurements
| Dimensions (in) | 8.6 L x 5 W x 3.3 H |
| Weight (lbs) | 12.6 lbs |
Emergency backup for wall packs is designed to install with existing LED Wall Packs with 0-10V or 1-10V dimmable drivers.
Constant output power and self-testing.
Provides 18 Watts of LED power for up to 90 minutes.
Recharge time is 24 hours. Includes three 1/2′ NPT entry points.
Additional Resources
Product Overview
This 18-watt wall pack battery backup provides emergency power for compatible LED wall packs with 0-10V or 1-10V dimmable drivers. It delivers constant emergency output for up to 90 minutes after normal power is lost.
The unit is intended for emergency backup integration, fixture repair and replacement, and lighting maintenance support where an existing wall-mounted LED wall pack requires emergency operation. It mounts to the wall pack installation and includes three 1/2-inch NPT entry points.
Core Performance and Output
The emergency module provides 18 watts of LED power for up to 90 minutes. Constant output power maintains the specified emergency output during the backup period.
It operates on 100-277V or 347V input at 50/60 Hz. Lumen output, beam distribution, and fixture efficiency are determined by the connected LED wall pack and are not established by the supplied backup specifications.
Adjustability and Control Options
This battery backup is compatible with existing LED wall packs using 0-10V or 1-10V dimmable drivers. The dimming method must match the connected fixture driver.
Self-testing is included. Control compatibility beyond the listed 0-10V and 1-10V driver types is not established by the supplied data.
Longevity and Reliability
The unit includes self-testing to support ongoing emergency backup operation. Recharge time is 24 hours after battery discharge.
Emergency runtime is rated for 90 minutes at 18 watts. Long-term performance depends on maintaining normal power and allowing the stated recharge period after an emergency event.
Build Quality and Physical Characteristics
The housing is die-cast aluminum with an IP65 rating. The unit measures 8.6 inches long, 5 inches wide, and 3.3 inches high.
Weight is 12.6 pounds. Three 1/2-inch NPT entry points are provided for installation routing.
Where This Product Fits Best
This emergency battery backup fits LED wall pack installations requiring emergency operation, repair support, or code-related emergency backup upgrades. It is intended for use with compatible dimmable LED wall pack drivers.
- emergency backup integration
- fixture repair and replacement
- lighting maintenance support
- code compliance upgrades
- emergency egress support
- field repair projects
The IP65-rated die-cast aluminum housing supports installations where the connected wall pack requires a durable enclosure. Final fit depends on the existing wall pack driver type, available installation space, and input voltage.
Installation and Long-Term Use
The unit is wall mounted and is designed to install with an existing LED wall pack using a 0-10V or 1-10V dimmable driver. Confirm the available input voltage is 100-277V or 347V before installation.
Installation layout follows the existing wall pack location and emergency lighting plan. Allow for the 24-hour recharge time after discharge before expecting the full 90-minute emergency runtime.
How This Fixture Is Commonly Used
For emergency backup integration and field repair projects, this unit is installed at the existing wall pack mounting location. Mounting height follows the installed wall pack position and is not defined by the supplied product data.
Lighting maintenance support and code compliance upgrades typically use the existing fixture layout rather than adding separate emergency fixtures. Fixture placement depends on the emergency egress support requirements and the connected wall pack layout.
Safety, Certifications, and Warranty
This battery backup is UL listed and IP65 rated.
The warranty is 5 years. The product includes self-testing and a 90-minute emergency runtime rating.
Frequently Asked Questions
Q: How much emergency power does this battery backup provide?
A: It provides 18 watts of LED power for up to 90 minutes.
Q: What input voltages are supported?
A: The unit operates on 100-277V or 347V at 50/60 Hz.
Q: What dimming drivers is this battery backup designed to work with?
A: It is designed for existing LED wall packs with 0-10V or 1-10V dimmable drivers.
Q: What should be considered when planning fixture placement for emergency egress support?
A: Existing wall pack locations, emergency lighting layout requirements, and compatibility with the connected dimmable driver affect placement. The supplied data does not establish a specific spacing value or fixture quantity.
Application Questions and Clarification
Q: Can this unit be used for fixture repair and replacement?
A: Yes. The supplied data identifies fixture repair and replacement as a valid application.
Q: Is this product intended for emergency backup integration?
A: Yes. It is designed to install with existing LED wall packs using 0-10V or 1-10V dimmable drivers.
Q: What should be verified for a code compliance upgrade?
A: Verify the existing LED wall pack uses a compatible 0-10V or 1-10V dimmable driver and that the available input voltage is 100-277V or 347V.
Web ID: 2112
