24 Watt Semi Cutoff LED Wall Pack | 3210 Lumens | 5000K | 100-277V

Product Overview

This 24 watt semi cutoff LED wall pack delivers 3,120 lumens at 130 lumens per watt with a 5000K color temperature. The fixture replaces 100 watt metal halide wall packs and operates on 100-277V input at 50-60Hz.

The die-cast aluminum housing has a bronze finish and measures 7.72 x 5.83 x 6.54 inches. Total fixture weight is 3.5 lbs. A polycarbonate lens provides optical protection with a 120x90 degree beam distribution.

This fixture is ETL listed and rebate eligible. LED Lighting Supply backs this wall pack with a 5 year warranty.

Where This Product Fits Best

The semi cutoff optical design directs light downward and outward while limiting upward light emission. This makes the fixture suitable for building perimeters, service entrances, loading areas, and exterior walkways where controlled distribution is appropriate.

IP65 rating allows installation in locations exposed to rain, snow, and hose-directed water. The operating temperature range of -40°F to 113°F supports year-round use in most climates without seasonal limitations.

At 24 watts and 3,120 lumens, this fixture fits applications where a 100 watt metal halide was previously installed. The 5000K output provides a daylight-equivalent appearance common in commercial and industrial exterior lighting.

Performance and Functional Considerations

Output is fixed at 3,120 lumens with no dimming capability. Color rendering is 70+ CRI, which is standard for general exterior illumination but not intended for color-critical tasks. The 120x90 degree beam angle produces a wide lateral spread with moderate forward projection.

Power factor exceeds 0.90 and total harmonic distortion is below 20%, which supports stable electrical performance on commercial circuits. Rated lifespan is 50,000 hours at L70, meaning the fixture maintains at least 70% of initial output through that period.

Installation and Long-Term Use

The fixture mounts directly to vertical wall surfaces using the integrated mounting points. At 3.5 lbs, the wall pack is light enough for standard exterior junction boxes and typical masonry or stud-backed installations.

The 100-277V universal input eliminates the need for voltage-specific fixtures across most commercial sites. The die-cast aluminum housing and IP65 sealing protect internal components from moisture and particulate exposure over the fixture''s service life.

How This Fixture Is Commonly Used

Facility operators typically install this wall pack at building entrances, along exterior corridors, above service doors, and adjacent to parking areas. The semi cutoff design limits light trespass toward neighboring properties and upper floors while concentrating output on ground-level areas.

Once installed, the fixture operates at a fixed output with no field adjustment for wattage or lumen levels. The bronze finish blends with common commercial building exteriors without requiring additional aesthetic treatment.

Safety, Certifications, and Warranty

This fixture is ETL listed and rebate eligible. IP65 rating confirms the fixture is protected against dust ingress and water jets from any direction.

LED Lighting Supply provides a 5 year warranty on this wall pack.

Frequently Asked Questions

What voltage does this fixture require?
The wall pack operates on 100-277V input at 50-60Hz, compatible with standard commercial electrical systems.

What does this fixture replace?
This 24 watt LED wall pack replaces 100 watt metal halide fixtures.

Is this fixture dimmable?
No. This fixture does not support dimming.

Can this fixture be installed outdoors?
Yes. The IP65 rating and -40°F to 113°F operating range allow full outdoor installation in exposed locations.

Is this fixture eligible for utility rebates?
This fixture is rebate eligible. Contact your local utility for program-specific requirements.

What is the warranty period?
LED Lighting Supply provides a 5 year warranty on this fixture.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.