3 Watt Explosion Proof Exit Emergency LED Light | Class 1 Div 1
Product Specifications
UL Specs
- UL 844 Hazardous Locations
- Class I, Division 1, Groups C, D
- Class I, Division 2, Groups A, B, C, D
- Class II, Division 1, Groups E, F, G
- Class II, Division 2, Groups F, G
- Class III
- UL 924 Emergency Lighting
- UL 1598A Marine Outside Type
- UL 1598 Wet Locations
- UL 8750 LED Safety
Key Features
| Brand | LED Lighting Supply |
| Watts | 3 |
| Voltage | 100V-277V |
| Dimming | No |
| Optics | Tempered Glass Lens |
| Lifespan | 50,000 (L70) hours |
| Mounting | Chain-Cable or 3/4 in NPT Pendant |
| Frequency (Hz) | 50-60Hz |
| Power Factor | >.95 |
| THD | < 10% |
Durable Construction
| Housing | Aluminum Alloy |
| IP Rating | IP66 |
| IK Rating | IK10 |
| Operating Temperature | -40°F to 140°F |
| Certifications | ETL | Rebate Eligible |
| Warranty | 5 years |
Measurements
| Dimensions (in) | 16 X 11.7 |
| Weight (lbs) | 14 |
Product Lighting Layout Estimator
Use this estimator to calculate approximate fixture count, spacing, and average foot-candles for a simple rectangular space using the selected LED fixture. Enter your room dimensions, mounting height, target foot-candles, light loss factor, and room/layout condition to generate a preliminary lighting layout. When IES photometry is available, workplane height and room reflectance controls are shown.
Project Inputs
Estimated Results
Estimated average foot-candles are preliminary and should be verified with a lighting plan for project-critical applications.
Room / Layout Condition: This field is used only when usable IES photometry is not available. In fallback mode, it acts as a simplified room utilization factor for reflectance, fixture distribution, racking, obstructions, and how much fixture light reaches the work area. Open / light-colored spaces use 0.90, typical warehouses or shops use 0.75, racked or obstructed spaces use 0.60, and dark or complex spaces use 0.45. When IES photometry is active, this field is hidden and the estimator uses the selected workplane height, LLF, and simplified reflectance adjustment instead.
Photometry / Simulation Note: When usable IES photometry is available for the selected fixture, this estimator uses the fixture’s IES candela data, selected workplane height, light loss factor, and simplified reflectance adjustment to estimate fixture count, average foot-candles, and visual light distribution. The reflectance adjustment is a conservative approximation and is not a full zonal-cavity, radiosity, or professional photometric room calculation. When IES photometry is not available, the estimator uses a simulated beam model based on lumens, mounting height, room/layout condition, light loss factor, and beam angle.
Preliminary Estimate Only: This estimator is intended for simple square or rectangular spaces and should be used as a planning aid, not a final photometric lighting plan. Actual light levels may vary based on fixture optics, selected IES file, mounting conditions, workplane height, ceiling height, surface reflectance, obstructions, controls, voltage, installation conditions, and site-specific requirements. Project-critical applications should be verified with a formal lighting plan.
This estimate is a starting point. Warehouses, industrial facilities, hazardous locations, sports areas, schools, healthcare spaces, public areas, and code-sensitive projects may require a reviewed lighting layout before purchase or installation.
Product Overview
This 3 Watt explosion proof exit emergency LED light is designed for hazardous-location emergency lighting and exit sign lighting. It operates on 100-277V power and uses a tempered glass lens with an aluminum alloy housing.
Core Performance and Output
The fixture is rated for 50-60Hz operation, with a power factor greater than 0.95 and total harmonic distortion below 10%. It is non-dimming.
Longevity and Reliability
The LED system is rated for 50,000 L70 hours. The fixture operates from -40 degrees F to 140 degrees F and carries an IP66 rating with IK10 impact protection.
Build Quality and Physical Characteristics
The aluminum alloy housing and tempered glass lens support use in demanding industrial and hazardous-location installations. The fixture measures 16 x 11.7 inches and weighs 14 pounds.
Where This Product Fits Best
This fixture fits hazardous locations requiring emergency exit or life-safety lighting within its listed hazardous-location classifications.
- hazardous location lighting
- explosion proof lighting
- chemical processing facility lighting
- oil and gas facility lighting
- refinery lighting
- marine environment lighting
- offshore rig lighting
- solvent storage area lighting
Installation and Long-Term Use
Mounting options include chain-cable mounting or 3/4 in NPT pendant mounting. Select the mounting method to suit the installation layout and fixture support arrangement.
Safety, Certifications, and Warranty
This fixture is UL 844 listed for Class I, Division 1, Groups C and D; Class I, Division 2, Groups A, B, C, and D; Class II, Division 1, Groups E, F, and G; Class II, Division 2, Groups F and G; and Class III locations. It is also UL 924, UL 1598A Marine Outside Type, UL 1598 Wet Locations, and UL 8750 LED Safety listed. ETL certification is included. The warranty term is 5 years.
Frequently Asked Questions
Q: What hazardous location classifications does this explosion proof exit emergency light support?
A: This fixture is UL 844 listed for Class I Division 1 Groups C and D, Class I Division 2 Groups A through D, Class II Division 1 Groups E through G, Class II Division 2 Groups F and G, and Class III locations.
Q: What mounting options are available for this fixture?
A: This explosion proof exit emergency LED light can be mounted by chain-cable or with a 3/4 in NPT pendant connection.
Q: Is this explosion proof emergency light dimmable?
A: No. This 3 Watt explosion proof exit emergency LED light is non-dimming.
Web ID: 1766


