60 Watt Explosion Proof LED Light | 8100 Lumens | Class 1 Div 1 | Class 2 Div 1 | 5000K | 100V-277V

Product Overview

This 60 watt explosion proof LED light delivers 8100 lumens at 135 lumens per watt, operating at 5000K color temperature with a CRI of 70+. The fixture replaces 250 watt metal halide systems and operates on 100V-277V input at 50-60Hz with a power factor greater than .95 and THD under 10%.

The housing is copper free aluminum with a tempered glass lens. The fixture measures 11.6 x 11.6 x 9.57 inches and weighs 27 lbs. Standard beam angle is 120 degrees, with optional 40, 60, or 90 degree optics available. Fixture color is gray.

This fixture is ETL listed and rebate eligible. Rated lifespan is 50,000 hours at L70. The fixture carries a 5 year warranty.

Where This Product Fits Best

This fixture is UL 844 listed for hazardous locations including Class I Division 1 Groups C and D, Class I Division 2 Groups A, B, C, and D, Class II Division 1 Groups E, F, and G, Class II Division 2 Groups F and G, and Class III environments. These ratings cover locations where ignitable concentrations of flammable gases, vapors, combustible dust, or fibers may be present during normal operations or abnormal conditions.

The fixture is UL 1598 suitable for wet locations and UL 1598A Marine Outside Type rated with ABS certification. This supports installation in outdoor industrial environments, marine vessels, and offshore platforms where exposure to water, salt air, and harsh weather is expected.

Operating temperature range is -22 degrees F to 122 degrees F, allowing deployment in cold storage areas, unheated facilities, and high ambient temperature process environments within those limits.

Performance and Functional Considerations

At 8100 lumens from 60 watts, this fixture produces output comparable to 250 watt metal halide while drawing significantly less power. The 5000K color temperature provides a neutral white light appropriate for task visibility in industrial work areas.

The standard 120 degree beam angle provides broad coverage for general area lighting. Optional 40, 60, or 90 degree optics allow narrower distribution when fixtures are mounted at greater heights or when concentrated light is needed over specific work zones or equipment.

This fixture is non-dimming. Voltage compatibility across 100V-277V accommodates common industrial electrical systems without requiring transformer matching.

Installation and Long-Term Use

Mounting options include yoke mount and 3/4 inch NPT pendant mount. Yoke mounting allows direct attachment to structural supports or junction boxes with adjustable aiming. Pendant mounting suits ceiling drops or pipe runs common in industrial facilities.

The IP66 rating means the fixture is protected against dust ingress and high-pressure water jets from any direction. The IK10 rating indicates the housing withstands significant mechanical impact. These ratings support installation in areas subject to washdown procedures, airborne particulates, and incidental contact from equipment or materials handling.

Surge protection is rated at 10kV, which provides resilience against electrical transients common in industrial power systems. At 27 lbs, the fixture requires adequate structural support at the mounting point.

How This Fixture Is Commonly Used

Facilities replacing aging metal halide systems in classified areas use this fixture to maintain required hazardous location compliance while reducing energy consumption and relamping frequency. The 50,000 hour rated lifespan reduces maintenance access requirements in areas where entry may involve permitting, hot work restrictions, or production shutdowns.

The optional beam angles allow facilities to match light distribution to ceiling height and task requirements. Narrow optics concentrate output for high-mount applications or aisle lighting, while the standard 120 degree spread covers broader floor areas from lower mounting positions.

The wet location and marine ratings make this fixture appropriate for refineries, chemical processing plants, grain handling facilities, oil platforms, and marine engine rooms where both hazardous atmosphere classifications and environmental exposure must be addressed by a single fixture.

Safety, Certifications, and Warranty

This fixture is UL 844 listed for the hazardous location classifications stated. It is UL 1598 suitable for wet locations and UL 1598A Marine Outside Type rated. ABS certification is included. The fixture is ETL listed and rebate eligible.

The 5 year warranty is provided by LED Lighting Supply. Warranty coverage applies to manufacturing defects under normal operating conditions within the stated temperature range and electrical specifications.

Frequently Asked Questions

What hazardous location classifications does this fixture carry?
Class I Division 1 Groups C and D, Class I Division 2 Groups A, B, C, and D, Class II Division 1 Groups E, F, and G, Class II Division 2 Groups F and G, and Class III.

What voltage range does this fixture accept?
100V-277V at 50-60Hz.

Is this fixture dimmable?
No, this fixture is non-dimming.

What mounting options are available?
Yoke mount and 3/4 inch NPT pendant mount.

Is this fixture eligible for utility rebates?
The fixture is listed as rebate eligible.

What is the warranty period?
5 years.

Can this fixture be used outdoors or in wet locations?
Yes, the fixture is UL 1598 suitable for wet locations and carries an IP66 rating.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.