120 Watt Mean Well LED Driver | HLG-120H-24A

Product Overview

The 120 Watt Mean Well LED Driver (HLG-120H-24A) is a 24-volt constant voltage driver rated for 120 watts of output. This driver accepts input voltage from 100V to 277V and operates at 50/60 Hz frequency, making it compatible with standard commercial and industrial electrical systems.

The unit measures 9.41 inches by 7.13 inches. It carries a UL listing and an IP65 rating, and is backed by a 3-year warranty.

Where This Product Fits Best

This driver is sized for 24-volt LED systems requiring up to 120 watts of power. The 100V-277V input range covers the voltage configurations found in most commercial and industrial facilities without requiring voltage-specific models.

The IP65 rating allows installation in locations exposed to dust accumulation and water spray, such as covered outdoor areas, wash-down zones, or spaces with airborne particulates. This makes the driver suitable for environments where fully enclosed indoor conditions cannot be maintained.

Performance and Functional Considerations

At 120 watts output, this driver supports LED loads that fall within its rated capacity. When sizing drivers, total connected wattage should remain below the driver''s maximum rating to allow for thermal margin during continuous operation.

The 50/60 Hz frequency compatibility means the driver functions on both standard North American electrical systems and facilities with equipment operating at either frequency. Input voltage flexibility from 100V to 277V eliminates the need to verify specific voltage taps before installation.

Installation and Long-Term Use

The 9.41-inch by 7.13-inch footprint should be verified against available mounting space before installation. Drivers of this size are typically mounted in accessible locations to allow for inspection and replacement if needed over the life of the lighting system.

The IP65 rating protects internal components from dust ingress and low-pressure water jets from any direction. This allows the driver to be installed in locations where occasional moisture contact or dusty conditions are present without requiring a separate enclosure.

How This Fixture Is Commonly Used

This driver powers 24-volt LED strip systems, signage, and linear lighting installations where a remote driver configuration is preferred or required. Facilities use drivers like this when LED light sources are separate from the power supply, allowing the driver to be located in a more accessible or protected location.

The wide input voltage range means the same driver works across different circuits within a facility. Maintenance teams can stock a single driver model for use in 120V, 208V, 240V, or 277V applications.

Safety, Certifications, and Warranty

This driver is UL listed. The IP65 rating allows exposure to dust and water spray without damage to internal components.

We provide a 3-year warranty on this driver.

Frequently Asked Questions

What voltage does this driver accept?
The driver accepts 100V to 277V input, covering standard commercial and industrial voltage configurations.

What is the output voltage and wattage?
This is a 24-volt driver rated for 120 watts maximum output.

Can this driver be used outdoors?
The IP65 rating allows installation in locations exposed to dust and water spray. Fully submerged or high-pressure wash environments are outside the scope of this rating.

What is the warranty?
This driver carries a 3-year warranty.

Is this driver UL listed?
Yes, the driver is UL listed.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.