40 Watt Emergency Driver | Emergency Battery Backup Supply
Dwayne Kula | President, CTO and Founder
300 in stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Watts | 40 |
| Input Voltage | 100V-277V | 347V |
| Operating Temp | 32°F to 122°F |
| Frequency | 50 / 60 hz |
| Dimensions | 5.5 in D X 6.8 in H |
| Discharge Time | 90 Minutes |
| Battery | 4.8V 1800mAh Nickel Cadmium |
| Surge Protection | 3KV |
| Weight | 7.3 lbs |
Emergency driver designed to install with the existing UFO LED High Bay to convert your LED High Bay into an emergency backup-ready unit.
This unit is designed to work on existing LED Fixtures up to 300 Watts. Fixture must be dimmable - either 0-10V or 1-10V.
Constant output power and self-testing.
Works with or without 0-10V dimmers, wall switches, and motion sensors.
Provides 40 Watts of LED power for up to 1.5 hours. Recharge time is 24 hours.
Additional Resources
Product Overview
This 40 Watt emergency driver adds battery backup capability to an existing UFO LED high bay fixture. It delivers constant emergency output for up to 90 minutes during a power interruption and is designed for use with dimmable LED fixtures up to 300 Watts.
The emergency driver is available for 100-277V or 347V input systems and uses a 4.8V, 1800mAh nickel cadmium battery. Self-testing supports routine emergency backup readiness checks.
Core Performance and Output
The driver supplies 40 Watts of LED emergency power for up to 1.5 hours. A full recharge requires 24 hours. It includes 3kV surge protection and operates in ambient temperatures from 32 degrees F to 122 degrees F.
Adjustability and Control Options
This emergency driver works with or without 0-10V dimmers, wall switches, and motion sensors. The connected LED fixture must support either 0-10V or 1-10V dimming.
Build Quality and Physical Characteristics
The emergency driver measures 5.5 inches in diameter by 6.8 inches high and weighs 7.3 pounds. It operates at 50/60 Hz.
Where This Product Fits Best
This driver supports emergency backup integration, repair, and retrofit work for compatible dimmable LED high bay fixtures.
- fixture repair and replacement
- emergency backup integration
- lighting maintenance support
- retrofit support
- code compliance upgrades
- emergency egress support
- field repair projects
Installation and Long-Term Use
Install this emergency driver with a compatible dimmable LED fixture rated up to 300 Watts. Select the version matching the building’s 100-277V or 347V input system.
Frequently Asked Questions
Q: What LED fixtures can use this 40 Watt emergency driver?
A: This emergency driver is designed for dimmable LED fixtures up to 300 Watts that use 0-10V or 1-10V dimming.
Q: How long does the emergency driver provide backup power?
A: This 40 Watt emergency driver provides LED emergency output for up to 90 minutes.
Q: Can this emergency driver be used with motion sensors or wall switches?
A: Yes. This emergency driver works with or without 0-10V dimmers, wall switches, and motion sensors.
Q: How long does the battery take to recharge?
A: The nickel cadmium battery requires 24 hours to recharge.
Web ID: 1663