200 Watt Round Explosion Proof LED Light | 28000 Lumens | Class 1 Div 2 | Class 2 Div 2 | 5000K | 100V-277V or 277V-480V

Product Overview

This 200 watt round explosion proof LED fixture delivers 28,000 lumens at 140 lumens per watt with a 5000K color temperature. It replaces 400 watt metal halide fixtures in hazardous location applications where ignitable gases, vapors, or combustible dusts may be present.

The fixture is UL 844 listed for Class I Division 2 Groups A, B, C, D; Class II Division 1 Groups E, F, G; Class II Division 2 Groups F, G; and Class III locations. It carries ATEX and IECEx markings for international hazardous area classifications. Two voltage configurations are available: 100V-277V and 277V-480V.

Construction uses copper-free aluminum housing with a tempered glass lens. The fixture measures 14.56 by 11.4 inches and weighs 18.1 pounds. Mounting options include yoke mount and 3/4 inch NPT pendant.

Where This Product Fits Best

This fixture is built for facilities operating under Class I Division 2 and Class II Division 1 and 2 hazardous location requirements. Typical environments include petrochemical processing areas, grain handling facilities, paint spray booths, fuel dispensing zones, and chemical storage buildings where specific gas groups or combustible dust classifications apply.

The UL 1598A Marine Outside Type listing makes this fixture suitable for offshore platforms, shipyards, and marine vessel applications exposed to saltwater environments. The wet location rating allows installation in areas subject to direct water exposure, spray, or washdown conditions.

With an operating temperature range of -40 degrees F to 140 degrees F, this fixture handles cold storage facilities, outdoor installations in extreme climates, and high-ambient industrial environments. The IP66 rating allows exposure to heavy rain, high-pressure washdowns, and dust-laden atmospheres without ingress.

Performance and Functional Considerations

At 28,000 lumens from 200 watts, this fixture provides a direct replacement path for 400 watt metal halide systems in hazardous locations. The 5000K color temperature produces a bright, neutral white light suitable for industrial task visibility. CRI is rated at 70 or higher.

The standard beam angle is 120 degrees for broad area coverage. Optional beam angles of 40, 60, or 90 degrees are available for applications requiring more concentrated distribution, such as aisle lighting or targeted task areas. Beam angle selection is fixed at time of configuration.

The driver supports 1-10V dimming for integration with facility lighting control systems. Power factor exceeds 0.95 with total harmonic distortion under 10 percent, meeting typical utility and facility power quality requirements. The fixture operates on 50-60Hz power systems.

Installation and Long-Term Use

Two mounting methods are supported: yoke mount for direct surface or structural attachment, and 3/4 inch NPT pendant for conduit-fed ceiling or canopy installations. At 18.1 pounds, the fixture requires appropriate structural support and mounting hardware rated for hazardous locations.

The IP66 rating means the fixture is sealed against dust ingress and protected from powerful water jets from any direction. The IK10 impact rating provides resistance to heavy physical contact, suitable for environments where equipment movement or material handling occurs near lighting positions.

Built-in 10kV surge protection guards against transient voltage events common in industrial electrical systems. Rated lifespan is 50,000 hours at L70, meaning the fixture will maintain at least 70 percent of initial lumen output through that service period.

How This Fixture Is Commonly Used

Facilities typically deploy this fixture in process areas, loading docks, tank farms, and production floors where hazardous atmosphere classifications require UL 844 listed equipment. The dual voltage options allow installation across different building service voltages without transformer requirements.

The available beam angle options let you match light distribution to the space. The 120-degree standard works well for open high bay areas. Narrower angles concentrate output for tall ceilings or long aisle runs where light needs to reach further without spreading wide.

Once installed, the 1-10V dimming input allows connection to building automation systems or standalone dimmer controls for output adjustment based on occupancy, daylight, or operational schedules. The fixture color is gray, matching typical industrial finish standards.

Safety, Certifications, and Warranty

This fixture is UL 844 listed for hazardous locations and UL 1598 listed for wet locations. It carries UL 1598A Marine Outside Type certification and ABS certification for marine applications. ETL listed.

ATEX marking: II 3 G Ex ec IIC T6...T3 Gc and II 2 D Ex tb IIIC T85 degrees C to T103 degrees C Db. IECEx marking: Ex ec IIC T6...T3 Gc and Ex tb IIIC T85 degrees C to T100 degrees C Db.

This fixture is rebate eligible through qualifying utility programs. LED Lighting Supply provides a 5-year warranty.

Frequently Asked Questions

What voltage options are available?
This fixture is available in 100V-277V or 277V-480V configurations to match your facility service voltage.

What hazardous location classifications does this fixture carry?
UL 844 listed for Class I Division 2 Groups A, B, C, D; Class II Division 1 Groups E, F, G; Class II Division 2 Groups F, G; and Class III.

Can this fixture be used outdoors or in wet environments?
Yes. The fixture is UL 1598 listed for wet locations, rated IP66, and carries UL 1598A Marine Outside Type certification.

What mounting options are available?
Yoke mount and 3/4 inch NPT pendant mount.

Is this fixture rebate eligible?
Yes, this fixture is rebate eligible through qualifying utility incentive programs.

What is the warranty?
LED Lighting Supply provides a 5-year warranty on this fixture.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.