20 Watt 12 In LED Flush Mounted Ceiling Light | 1400 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This 20-watt LED flush mounted ceiling light is a 12-inch round surface fixture for commercial ceiling lighting, corridor lighting, utility space lighting, and low ceiling lighting. It produces 1,400 lumens through an acrylic lens with a 120-degree beam angle.

The fixture has selectable 3000K, 4000K, and 5000K color temperatures, allowing the installed light color to match the space. Its 100-277V input supports common commercial electrical systems.

The low-profile 4.5-inch housing is suited to ceiling areas where a recessed fixture is not being used. The brushed nickel finish provides a finished appearance in visible interior spaces.

Core Performance and Output

This fixture delivers 1,400 lumens at 20 watts, with an efficacy of 70 lumens per watt. It is rated for 80+ CRI and operates on 100-277V, 50/60 Hz power.

The standard 120-degree distribution provides broad downward illumination from a surface-mounted position. The output is appropriate for lower ceiling installations and local interior lighting coverage.

At very low mounting heights, fixture spacing and dimming settings should be considered to avoid excessive brightness. Wider spacing can reduce uniformity because this fixture has a fixed 120-degree beam distribution.

Adjustability and Control Options

A field-selectable color temperature switch provides 3000K, 4000K, or 5000K output. The color setting should be selected before final installation and commissioning.

Triac dimming is supported. Dimming behavior depends on the installed compatible Triac control.

Longevity and Reliability

This surface mount fixture is rated for a 50,000-hour lifespan. It carries a 5-year warranty.

The operating temperature range is -4 degrees F to 122 degrees F. This range supports interior commercial conditions within the stated temperature limits.

Build Quality and Physical Characteristics

The fixture uses a stainless steel housing, acrylic lens, and brushed nickel finish. It measures 12 inches in diameter by 4.5 inches high.

Fixture weight is 2 pounds. The unit is designed for surface mounting and does not require recessed ceiling depth.

Where This Product Fits Best

This fixture fits interior areas needing broad, general illumination from a finished surface-mounted ceiling fixture. Its 1,400-lumen output and low-profile round form factor align with lower ceiling installations and smaller interior zones.

• commercial ceiling lighting
• corridor lighting
• low ceiling lighting
• utility space lighting
• storage room lighting
• back-of-house lighting
• maintenance area lighting
• small retail lighting

The stainless steel housing operates within a -4 degrees F to 122 degrees F temperature range. The fixture is intended for surface-mounted interior installations.

Installation and Long-Term Use

The fixture mounts directly to the ceiling surface. Its 12-inch diameter and 4.5-inch height should be checked against ceiling obstructions, access panels, and nearby building systems before installation.

Confirm the supply voltage is within the 100-277V range and set the desired color temperature before closing the fixture. Use a compatible Triac dimmer when dimming is required.

For long-term service, maintenance personnel should keep the acrylic lens clean and inspect the fixture housing, mounting condition, and electrical connections during scheduled lighting maintenance.

How This Fixture Is Commonly Used

In corridor lighting, commercial ceiling lighting, and low ceiling lighting, fixtures are typically arranged in repeated ceiling locations to maintain consistent illumination along the space. The broad 120-degree distribution supports overlapping light patterns between fixtures.

For utility space lighting, storage room lighting, back-of-house lighting, and maintenance area lighting, the fixture is surface mounted where a low-profile ceiling light is needed. Mounting height, ceiling layout, and target light levels affect the final fixture arrangement.

Closer spacing improves uniformity but increases the number of fixtures. Wider spacing reduces fixture count but can leave lower light levels between fixture locations.

Safety, Certifications, and Warranty

This fixture is ETL certified and rebate eligible.

The fixture carries a 5-year warranty and is rated for operation from -4 degrees F to 122 degrees F.

Frequently Asked Questions

Q: What is the light output of this surface mount fixture?

A: The fixture produces 1,400 lumens at 20 watts.

Q: Which color temperatures are available?

A: The fixture has selectable 3000K, 4000K, and 5000K color temperatures.

Q: Does this fixture support dimming?

A: Yes. It supports Triac dimming.

Q: What voltage does the fixture require?

A: The fixture operates on 100-277V, 50/60 Hz power.

Q: What should be considered when planning fixture layout?

A: Mounting height, ceiling layout, target light levels, and the 120-degree beam distribution affect fixture placement. The supplied product data does not establish a specific spacing value or fixture quantity.

Application Questions and Clarification

Q: Is this fixture suitable for low ceiling lighting?

A: Yes. Low ceiling lighting is a listed primary application, and the fixture has a 4.5-inch surface-mounted profile.

Q: Can this fixture be used for corridor lighting?

A: Yes. Corridor lighting is a listed primary application. The fixture provides 1,400 lumens with a 120-degree beam angle.

Q: What should be confirmed before using this fixture in a maintenance area?

A: Confirm the available voltage is within 100-277V, the operating temperature remains within -4 degrees F to 122 degrees F, and the surface mounting location accommodates the 12-inch diameter fixture.

Web ID: 1636