100 Watt LED High Temperature Light | 13000 Lumens | 5000K | 100V-277V or 277-480V | Rated to 176F

Product Overview

This 100 watt LED high temperature fixture delivers 13,000 lumens at 5000K color temperature and operates reliably in ambient conditions from -40°F to 176°F. The fixture replaces 250 watt metal halide systems and is built with a die-cast aluminum housing and large heat sink designed for sustained performance in elevated temperature environments.

Two voltage configurations are available: 100V-277V and 277V-480V. The fixture accepts 50/60 Hz input with a power factor of .95 and total harmonic distortion at 20% maximum. Rated lifespan is 100,000 hours at L70.

The standard beam angle is 110 degrees, with optional optics available at 30, 90, and 140 degrees. All configurations use a polycarbonate lens. The fixture measures 12.1 x 14.4 x 9.6 inches and weighs 17.2 lbs.

Where This Product Fits Best

This fixture is intended for locations where ambient temperatures regularly exceed the operating limits of standard LED high bays. Foundries, bakeries, glass manufacturing, laundry facilities, and boiler rooms are typical environments where the 176°F maximum operating temperature becomes a requirement rather than an advantage.

The 3G vibration rating supports installation in areas with mechanical equipment, overhead cranes, or structural movement that would compromise fixtures without vibration-tested components. IP66 protection allows use in washdown areas or spaces with direct water spray and airborne particulates.

IK10 impact resistance handles environments where accidental contact from forklifts, moving materials, or maintenance equipment is possible. The 12kV surge protection addresses facilities with unstable incoming power or frequent switching transients.

Performance and Functional Considerations

At 130 lumens per watt, this fixture produces 13,000 lumens from 100 watts of input power. CRI is 70+, which is appropriate for industrial task areas and general manufacturing but may not suit color-critical inspection or retail environments.

This fixture does not dim. Applications requiring adjustable output or integration with daylight harvesting systems will need a different product. The 5000K color temperature produces a cool white appearance consistent with typical industrial and warehouse environments.

Beam angle selection affects light distribution. The 110-degree standard optic spreads light over a wide area. The 30-degree optic concentrates output for higher mounting heights or aisle-specific coverage. The 90-degree and 140-degree options fall between these extremes for intermediate spacing or ceiling height conditions.

Installation and Long-Term Use

Mounting options include eye-hook and trunnion configurations. Eye-hook mounting works with chain or cable suspension systems. Trunnion mounting allows surface attachment to ceilings, beams, or structural supports with adjustable aiming.

At 17.2 lbs, the fixture requires mounting hardware and structure rated for the weight plus any dynamic loads from vibration or movement in the space. The die-cast aluminum housing dissipates heat through the integrated heat sink without active cooling components.

The 100,000-hour rated lifespan at L70 means the fixture is expected to retain 70% of initial lumen output at that point. In high-temperature applications, thermal management is already addressed by the fixture design, but adequate airflow around the heat sink supports long-term performance.

How This Fixture Is Commonly Used

Operators in high-heat facilities typically install this fixture where standard high bays have failed prematurely due to thermal stress. The 176°F ambient rating allows placement closer to heat sources, ovens, or process equipment than conventional LED fixtures tolerate.

Beam angle selection is made based on mounting height and the coverage pattern needed. Facilities with higher ceilings or narrow aisles often use the 30-degree optic to maintain usable light levels at the task surface. Open floor areas with lower ceilings typically use the 110-degree or 140-degree options.

Maintenance personnel access the fixture for cleaning or inspection using the same mounting hardware used for installation. The polycarbonate lens can be wiped down in washdown environments where dust, grease, or particulate buildup affects output over time.

Safety, Certifications, and Warranty

This fixture is ETL listed. IP66 rated for protection against dust ingress and high-pressure water jets. IK10 rated for impact resistance against heavy mechanical contact.

Surge protection is rated at 12kV. The operating temperature range is -40°F to 176°F. We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage options are available?
This fixture is available in 100V-277V or 277V-480V configurations.

Can this fixture be dimmed?
No, this fixture does not support dimming.

What is the maximum operating temperature?
The fixture operates in ambient temperatures up to 176°F.

What beam angles are available?
The standard beam angle is 110 degrees. Optional optics include 30, 90, and 140 degrees.

Is this fixture suitable for wet or washdown areas?
Yes, the IP66 rating allows installation in areas with direct water spray and dust exposure.

What mounting options are included?
Eye-hook and trunnion mounting configurations are available.

What is the warranty period?
This fixture includes a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.