30 Watt Explosion Proof Jelly Jar LED Light | 3900 Lumens | Class 1 Div 1 | Class 2 Div 1 | 5000K | 100-277V

Product Overview

This 30 watt explosion proof jelly jar LED light delivers 3900 lumens at 5000K, replacing 100 watt metal halide fixtures in classified hazardous locations. The fixture carries UL 844 certification for Class I Division 1 Groups C and D, Class I Division 2 Groups A, B, C, and D, Class II Division 1 Groups E, F, and G, Class II Division 2 Groups F and G, and Class III environments.

Construction uses copper free aluminum housing with a spherical tempered glass dome. The fixture operates on 100-277V input at 50-60Hz with a power factor greater than 0.95 and THD below 10 percent. Total harmonic distortion and power factor at these levels allow the fixture to run on facility electrical systems without introducing significant line noise or power quality issues.

The fixture measures 12.5 by 8.8 inches and weighs 14 pounds. A 360 degree beam angle provides omnidirectional light distribution from the jelly jar form factor. Rated lifespan is 50,000 hours at L70.

Where This Product Fits Best

This fixture is built for locations where ignitable concentrations of flammable gases, vapors, or combustible dusts may be present during normal operations. Class I Division 1 and Class II Division 1 ratings mean it can be installed where hazardous atmospheres exist continuously or intermittently under normal conditions, not just during abnormal events or failures.

UL 1598 Suitable for Wet Locations and UL 1598A Marine Outside Type certifications extend use to outdoor industrial sites, docks, marine vessels, and other environments exposed to direct water contact and salt air. ABS certification supports marine and offshore applications where that standard is required.

The operating temperature range of negative 22 degrees to 122 degrees Fahrenheit covers cold storage entry points, process areas with elevated ambient heat, and outdoor installations in seasonal temperature extremes.

Performance and Functional Considerations

At 130 lumens per watt, this fixture produces 3900 lumens from 30 watts of input power. The 5000K color temperature provides a cool white appearance suited to task areas, walkways, and equipment locations where visual clarity supports safe operations. CRI is rated at 70 or higher.

The 360 degree beam angle distributes light in all directions from the globe, which is typical of jelly jar fixtures used for general area illumination rather than directed task lighting. This makes the fixture appropriate for stairwells, equipment rooms, walkways, and utility areas where even ambient light is more useful than focused output.

Dimming is supported via 1-10V control. This allows the fixture to be integrated into building management or lighting control systems where variable output levels are needed.

Installation and Long-Term Use

Standard mounting is surface mount. A 3/4 inch NPT pendant mount option is also available for drop installations from ceilings or structural supports. The 14 pound weight and 12.5 by 8.8 inch dimensions should be accounted for when selecting mounting hardware and verifying structural support.

IP66 rating means the fixture is protected against dust ingress and high-pressure water jets from any direction. IK10 rating means the housing and lens can withstand significant physical impact without compromising the enclosure. These ratings support installations in washdown areas, outdoor locations, and spaces where equipment contact or falling objects are concerns.

The copper free aluminum housing resists corrosion in marine and chemical environments. The spherical tempered glass dome provides impact resistance and maintains optical clarity over time.

How This Fixture Is Commonly Used

Facilities typically install this fixture in locations where a previous metal halide jelly jar was in service and the classified area rating must be maintained. The 100 watt metal halide replacement equivalence gives a reference point for output expectations in those spaces.

In day-to-day operation, the fixture provides ambient illumination with no directional adjustment needed. Where 1-10V dimming is connected, output can be reduced for overnight security lighting or raised during active operations without changing the fixture.

The wet location and marine certifications mean the fixture can be hosed down or left exposed to weather and spray without concern for water intrusion. Maintenance personnel working in these areas do not need to treat the fixture as a protected component during cleaning operations.

Safety, Certifications, and Warranty

This fixture is UL 844 listed for the hazardous location classes and divisions stated. It is UL 1598 Suitable for Wet Locations and UL 1598A Marine Outside Type certified. ABS certification is included. The fixture is ETL listed and rebate eligible.

We provide a 5 year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture accept?
The fixture operates on 100-277V at 50-60Hz.

What hazardous location classifications does this fixture carry?
UL 844 certification covers Class I Division 1 Groups C and D, Class I Division 2 Groups A, B, C, and D, Class II Division 1 Groups E, F, and G, Class II Division 2 Groups F and G, and Class III.

Is this fixture rebate eligible?
Yes, this fixture is rebate eligible.

What is the warranty period?
This fixture includes a 5 year warranty.

Can this fixture be used outdoors or in wet locations?
Yes. The fixture is UL 1598 Suitable for Wet Locations and UL 1598A Marine Outside Type certified, with an IP66 rating.

What are the mounting options?
Surface mount is standard. A 3/4 inch NPT pendant mount option is also available.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.