10 Foot HVLS Ceiling Fan | 5 Blades | 2,600 Square Foot Coverage | 208-240V or 380-480V
Dwayne Kula | President, CTO and Founder
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Diameter | 10 ft |
| Speed | Variable |
| Phase | 1P | 3P |
| Color | Silver |
| Blade Material | Aluminum |
| Controller | Wall Mounted VFD |
| Blades | 5 |
| Frequency (hz) | 50/60 |
| Fan CFM | 141,259 |
| Coverage Area (sq ft) | 2,600 |
| RPM | 120 |
| Sound Level (db) | 38 |
| Fan Weight (lbs) | 135 |
| Motor Size | 0.5 HP 370 Watt | PMSM Motor |
| IP Rating | IP55 | Controller IP66 |
| Downrod (in) | 2 |
| Voltage | 208V-240V | 380V-480V |
| Warranty | 2 years |
Product Overview
This 10-foot HVLS ceiling fan is designed to move high volumes of air across large interior spaces. Its five aluminum blades, PMSM motor, and wall-mounted VFD controller provide variable-speed airflow control.
The fan delivers up to 141,259 CFM with a rated coverage area of 2,600 square feet. It is configured for 208-240V or 380-480V operation in single-phase or three-phase systems.
Core Performance and Output
The 0.5 HP, 370-watt PMSM motor operates at up to 120 RPM and produces up to 141,259 CFM. The large 10-foot diameter moves air over a broad area rather than creating a concentrated air stream.
Rated sound level is 38 dB. The 2,600 square foot coverage rating is a planning reference; final coverage depends on mounting height, surrounding obstructions, and the required air movement in the space.
Adjustability and Control Options
Fan speed is variable through the wall-mounted VFD controller. This allows operators to adjust airflow as occupancy, process conditions, and seasonal requirements change.
The fan is available for 208-240V or 380-480V electrical systems and supports 50/60 Hz operation. Phase options are 1P and 3P.
Longevity and Reliability
The fan uses a PMSM motor rated at 0.5 HP and 370 watts. The fan carries an IP55 rating, and the controller carries an IP66 rating.
A 2-year warranty is included. Routine service access should account for the 135-pound fan assembly and wall-mounted controller location.
Build Quality and Physical Characteristics
This fan has a 10-foot diameter, five aluminum blades, and a silver finish. The aluminum blade construction keeps the assembly suited to large-area air movement without the bulk of heavier blade materials.
The fan weighs 135 pounds and uses a 2-inch downrod. The mounting structure must support the fan assembly and its operating load.
Where This Product Fits Best
This fan fits large indoor spaces that need broad-area air circulation from an overhead installation. Its output and 10-foot blade diameter align with open layouts where air movement can spread across the occupied area.
- warehouse ventilation
- manufacturing facility ventilation
- distribution center ventilation
- gymnasium ventilation
- agricultural building ventilation
- aircraft hangar ventilation
- convention center ventilation
The IP55 fan and IP66 controller ratings support installations where equipment protection is a defined project requirement. Final fit depends on available overhead structure, electrical service, controller placement, and clearance around the blade sweep.
Installation and Long-Term Use
Install the fan from a structure capable of supporting the 135-pound assembly and operating load. Locate the wall-mounted VFD controller where it remains accessible for normal speed adjustment and service.
Confirm the available voltage and phase before installation. Maintain clearance around the 10-foot blade diameter and verify that nearby building elements do not interfere with fan operation.
How This Fixture Is Commonly Used
In warehouse ventilation, manufacturing facility ventilation, and distribution center ventilation layouts, the fan is positioned over open work and storage areas to move air across a broad floor area. Mounting height is determined by the available overhead structure, required blade clearance, and desired air distribution.
Gymnasium ventilation, agricultural building ventilation, aircraft hangar ventilation, and convention center ventilation layouts typically use the fan over larger open zones rather than confined areas. Fan placement and spacing vary with the 2,600 square foot coverage rating, layout obstructions, and required airflow pattern.
Safety, Certifications, and Warranty
The fan is rated IP55. The wall-mounted VFD controller is rated IP66.
The fan includes a 2-year warranty. Installation must account for the 135-pound fan weight, 10-foot blade diameter, electrical voltage, and phase configuration.
Frequently Asked Questions
Q: What is the diameter of this HVLS ceiling fan?
A: The fan has a 10-foot diameter.
Q: How much airflow does the fan produce?
A: The fan produces up to 141,259 CFM at a maximum speed of 120 RPM.
Q: What coverage area is listed for this fan?
A: The listed coverage area is 2,600 square feet.
Q: Can fan speed be adjusted?
A: Yes. The fan has variable speed control through a wall-mounted VFD controller.
Q: What voltage options are available?
A: The fan is available in 208-240V and 380-480V configurations with 1P or 3P phase options.
Q: What should be considered when planning fan layout?
A: The 2,600 square foot coverage rating, mounting height, surrounding obstructions, blade clearance, and required airflow pattern affect final fan layout.
Application Questions and Clarification
Q: Is this fan appropriate for warehouse ventilation and manufacturing facility ventilation?
A: Yes. Warehouse ventilation and manufacturing facility ventilation are primary applications for this HVLS fan category.
Q: Can this fan be used for gymnasium ventilation?
A: Yes. Gymnasium ventilation is a primary application for this HVLS fan category.
Q: What should be confirmed before using this fan for aircraft hangar ventilation?
A: Confirm overhead structural support, blade clearance, available voltage, phase configuration, and controller location.
Q: Does the controller have a different IP rating than the fan?
A: Yes. The fan is IP55, and the wall-mounted VFD controller is IP66.
Web ID: 2703
