20 Watt Portable Explosion Proof LED Work Light | 1600 Lumens | Class 1 Div 1 | 5000K | 10 Hour Run Time | 100-240V AC Charger Included | Intrinsically Safe

Product Overview

This 20 watt portable explosion proof LED work light delivers 1600 lumens at 5000K with a 120-degree beam angle. The fixture is UL 913 listed for Class I, Division 1 locations covering Groups A, B, C, and D with a T4 temperature classification. A 100-240V AC charger is included, and the internal battery provides up to 10 hours of run time per charge.

The compact, mobile form factor is built for handheld or temporarily positioned use in hazardous environments where intrinsically safe equipment is required. Rated lifespan is 50,000 hours at L70.

Where This Product Fits Best

This fixture is designed for Class I, Division 1 atmospheres where flammable gases or vapors may be present during normal operations. Group classifications cover hydrogen (A), acetylene and similar gases (B), ethylene and comparable compounds (C), and hydrocarbons such as propane and gasoline vapors (D).

Typical environments include refineries, chemical processing areas, fuel storage facilities, paint spray booths, and tank inspection work. The portable design supports task lighting during maintenance, inspection, or temporary work in locations where permanent lighting is not practical or available.

Performance and Functional Considerations

Output is 1600 lumens from a 20 watt source, producing 80 lumens per watt. The 120-degree beam angle provides broad coverage suited for close-range task work rather than narrow spot illumination. Color temperature is 5000K, which renders detail clearly in inspection and maintenance tasks.

Power factor exceeds 0.95 and total harmonic distortion is under 10 percent. The fixture does not support dimming. Operating frequency range is 50-60Hz, and the included charger accepts 100-240V AC input for use across varying supply voltages.

Installation and Long-Term Use

This is a portable, rechargeable unit rather than a permanently mounted fixture. The included AC charger connects to 100-240V supplies for recharging between uses. A full charge supports up to 10 hours of continuous operation.

IP66 rating means the enclosure is fully protected against dust ingress and can withstand powerful water jets from any direction. This allows use in wet, dusty, or washdown-prone hazardous areas. The T4 temperature code indicates maximum surface temperature remains at or below 135 degrees Celsius during operation.

How This Fixture Is Commonly Used

Operators typically carry this light into confined spaces, tanks, or process areas where fixed lighting does not exist or has been de-energized for maintenance. The 10-hour run time supports full-shift work without returning the unit for charging mid-task.

The broad 120-degree beam covers a wide working area at close range, which suits inspection work, equipment servicing, and temporary illumination during shutdowns. The 5000K output helps distinguish colors and surface conditions during visual inspection tasks.

Safety, Certifications, and Warranty

This fixture is UL 913 listed for hazardous locations. It is rated for Class I, Division 1 environments in Groups A, B, C, and D with a T4 temperature classification. The design meets intrinsically safe requirements for areas where ignitable concentrations of flammable gases or vapors exist under normal operating conditions.

IP66 rating confirms protection against dust and high-pressure water exposure. Warranty coverage is 5 years.

Frequently Asked Questions

What hazardous location classification does this light carry?
Class I, Division 1, Groups A, B, C, D with T4 temperature code. It is UL 913 listed.

What voltage does the charger accept?
The included charger operates on 100-240V AC at 50-60Hz.

How long does the battery last on a full charge?
Run time is up to 10 hours.

Is this fixture rated for wet or dusty environments?
IP66 rated. It is protected against dust ingress and high-pressure water jets.

What is the warranty period?
5 years.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.