80 / 100 / 120 Watt Adjustable LED Wall Pack | 11200 to 16800 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Built-In Photocell

Product Overview

This adjustable LED wall pack provides exterior wall-mounted lighting with selectable 80W, 100W, or 120W output and selectable 3000K, 4000K, or 5000K color temperature. It is designed for security lighting, building exterior lighting, and commercial exterior wall lighting.

The fixture produces up to 16,800 lumens and can replace 250W or 400W metal halide wall-mounted fixtures. Its built-in photocell supports dusk-to-dawn operation where that control approach is required.

Core Performance and Output

Selectable output settings provide 11,200 lumens at 80W, 14,000 lumens at 100W, and 16,800 lumens at 120W. Fixture efficacy is 140 lumens per watt, with a 70+ CRI.

The fixture operates on 100-277V, 50/60Hz power. Power factor is greater than 0.90, and total harmonic distortion is less than 20%.

A tempered glass lens protects the optical assembly. The supplied product data does not specify a beam distribution, so final placement should account for the required wall coverage and target light levels.

The 120W setting can produce excessive light at lower mounting locations when lower output settings are adequate. Wattage selection should be matched to the wall area and lighting requirement.

Adjustability and Control Options

Field-selectable wattage settings allow the fixture to operate at 80W, 100W, or 120W. Field-selectable color temperature settings include 3000K, 4000K, and 5000K.

0-10V dimming is included. The built-in photocell provides an available automatic on-off control method based on ambient daylight.

Longevity and Reliability

This wall pack is rated for 50,000 L70 hours. The L70 rating identifies the point at which light output is expected to remain at 70% of initial output.

Operating temperature range is -40 degrees F to 122 degrees F. Integrated 6kV surge protection supports fixture protection from electrical surge events.

Build Quality and Physical Characteristics

The housing is die-cast aluminum with a bronze finish. The fixture uses a tempered glass lens and has an IP65 rating.

Fixture dimensions are 14.2 inches long by 9 inches wide by 6.5 inches high. Fixture weight is 10 pounds.

Where This Product Fits Best

This wall pack fits exterior wall locations requiring selectable output, adjustable color temperature, and wall-mounted installation. Its IP65 construction supports exposed exterior conditions within the stated operating temperature range.

• security lighting
• building exterior lighting
• commercial exterior wall lighting
• building facade lighting
• perimeter lighting
• entry lighting
• loading area lighting

The die-cast aluminum housing, tempered glass lens, IP65 rating, and 6kV surge protection address common exterior exposure conditions. Final fixture settings should reflect the lighting level needed at the mounting location.

Installation and Long-Term Use

This fixture mounts directly to a wall. Verify wall condition, mounting surface, branch voltage, and available wiring before installation.

Set wattage and color temperature before final commissioning. The photocell and 0-10V dimming connections should be evaluated against the control method used at the installation location.

How This Fixture Is Commonly Used

For security lighting, perimeter lighting, and building exterior lighting, wall packs are positioned to provide light along exterior wall surfaces and adjacent exterior areas. Mounting height and fixture placement are determined by wall geometry, lighting targets, and the selected wattage setting.

For building facade lighting, entry lighting, commercial exterior wall lighting, and loading area lighting, fixtures are typically arranged along the wall based on access points and the extent of the area requiring illumination. Higher output can reduce fixture count, but it can also increase brightness near the wall.

Safety, Certifications, and Warranty

This fixture is UL listed and DLC Premium.

The fixture includes a 5-year warranty.

Frequently Asked Questions

Q: What wattage and lumen settings are available?

A: The fixture is selectable at 80W, 100W, or 120W. Output is 11,200 lumens, 14,000 lumens, or 16,800 lumens, respectively.

Q: What color temperatures are available?

A: The fixture has selectable 3000K, 4000K, and 5000K color temperature settings.

Q: Does this wall pack include dimming and photocell control?

A: Yes. The fixture includes 0-10V dimming and a built-in photocell.

Q: What should be considered when setting fixture output for exterior wall lighting?

A: Select the 80W, 100W, or 120W setting based on the required light level, mounting location, and wall coverage. The supplied data does not establish a specific spacing or coverage value.

Application Questions and Clarification

Q: Is this fixture appropriate for security lighting and perimeter lighting?

A: Security lighting and perimeter lighting are listed applications for this LED wall pack. The fixture provides selectable output from 11,200 to 16,800 lumens.

Q: Can this fixture be used for building facade lighting?

A: Building facade lighting is a listed application. The selectable 3000K, 4000K, and 5000K settings allow the color temperature to be set for the project requirement.

Q: What environmental information should be reviewed for commercial exterior wall lighting?

A: The fixture has an IP65 rating, a die-cast aluminum housing, tempered glass lens, 6kV surge protection, and an operating temperature range of -40 degrees F to 122 degrees F.

Web ID: 2686