120 Watt Explosion Proof 2×4 Low Profile Linear LED Light | 16800 Lumens | Class 1 Div 2 | 5000K | 100-277V
Neil Peterson | CEO and Chief Lighting Specialist
Product Specifications
UL Specs
- UL 844 Hazardous Locations
- Class 1, Division 2, Groups A,B,C,D
- Class 2, Division 1, Groups F,G
- Class 3
Key Features
| Brand | LED Lighting Supply |
| Watts | 120 |
| Lumens | 16800 |
| Lumens Per Watt | 140 |
| Replaces | 400 Watt Metal Halide |
| Voltage | 100V-277V |
| Color Temperature | 5000K |
| CRI | 70+ |
| Dimming | 1-10V |
| Beam Angles (Std) | 120° |
| Optics | Polycarbonate Lens |
| Lifespan | 50,000 (L70) hours |
| Mounting | Chain-Cable or Recessed or Surface |
| Frequency (Hz) | 50-60Hz |
| Power Factor | >.95 |
| THD | < 10% |
Durable Construction
| IP Rating | IP66 |
| IK Rating | IK09 |
| Operating Temperature | -22°F to 122°F |
| Certifications | UL | Rebate Eligible | NSF Rated |
| Warranty | 5 years |
Measurements
| Dimensions (in) | 47.8 x 23.8 x 3.7 |
| Weight (lbs) | 88 |
Additional Resources
Product Lighting Layout Estimator
Use this estimator to calculate approximate fixture count, spacing, and average foot-candles for a simple rectangular space using the selected LED fixture. Enter your room dimensions, mounting height, target foot-candles, light loss factor, and room/layout condition to generate a preliminary lighting layout. When IES photometry is available, workplane height and room reflectance controls are shown.
Project Inputs
Estimated Results
Estimated average foot-candles are preliminary and should be verified with a lighting plan for project-critical applications.
Room / Layout Condition: This field is used only when usable IES photometry is not available. In fallback mode, it acts as a simplified room utilization factor for reflectance, fixture distribution, racking, obstructions, and how much fixture light reaches the work area. Open / light-colored spaces use 0.90, typical warehouses or shops use 0.75, racked or obstructed spaces use 0.60, and dark or complex spaces use 0.45. When IES photometry is active, this field is hidden and the estimator uses the selected workplane height, LLF, and simplified reflectance adjustment instead.
Photometry / Simulation Note: When usable IES photometry is available for the selected fixture, this estimator uses the fixture’s IES candela data, selected workplane height, light loss factor, and simplified reflectance adjustment to estimate fixture count, average foot-candles, and visual light distribution. The reflectance adjustment is a conservative approximation and is not a full zonal-cavity, radiosity, or professional photometric room calculation. When IES photometry is not available, the estimator uses a simulated beam model based on lumens, mounting height, room/layout condition, light loss factor, and beam angle.
Preliminary Estimate Only: This estimator is intended for simple square or rectangular spaces and should be used as a planning aid, not a final photometric lighting plan. Actual light levels may vary based on fixture optics, selected IES file, mounting conditions, workplane height, ceiling height, surface reflectance, obstructions, controls, voltage, installation conditions, and site-specific requirements. Project-critical applications should be verified with a formal lighting plan.
This estimate is a starting point. Warehouses, industrial facilities, hazardous locations, sports areas, schools, healthcare spaces, public areas, and code-sensitive projects may require a reviewed lighting layout before purchase or installation.
Product Overview
This 120W low-profile linear LED explosion proof fixture delivers 16,800 lumens at 5000K for hazardous location lighting. Its 2×4-style form factor supports chain-cable, recessed, or surface mounting for installations requiring a broad 120-degree distribution.
Core Performance and Output
The fixture produces 140 lumens per watt and is identified as a replacement for 400W metal halide lighting. It operates on 100-277V, 50-60Hz power and supports 1-10V dimming.
Longevity and Reliability
The LED light is rated for 50,000 L70 hours and operates from -22 degrees F to 122 degrees F. Its IP66 rating and IK09 impact rating support use where protection from dust, water, and physical impact is required.
Build Quality and Physical Characteristics
A polycarbonate lens protects the optics. The fixture measures 47.8 x 23.8 x 3.7 inches and weighs 88 lb.
Where This Product Fits Best
This linear fixture is suited to classified hazardous locations requiring high-output general illumination and a low-profile mounting format.
- hazardous location lighting
- explosion proof lighting
- paint booth lighting
- chemical processing facility lighting
- oil and gas facility lighting
- refinery lighting
Installation and Long-Term Use
Mounting options include chain-cable, recessed, and surface installation. The 100-277V input range supports common commercial and industrial electrical systems.
Safety, Certifications, and Warranty
The fixture is UL 844 rated for hazardous locations: Class 1, Division 2, Groups A, B, C, and D; Class 2, Division 1, Groups F and G; and Class 3. It is also NSF rated and rebate eligible. Warranty coverage is 5 years.
Frequently Asked Questions
Q: What hazardous location classifications does this fixture carry?
A: This fixture is UL 844 rated for Class 1, Division 2, Groups A, B, C, and D; Class 2, Division 1, Groups F and G; and Class 3 hazardous locations.
Q: Can this explosion proof light be dimmed?
A: Yes. This 120W explosion proof linear LED fixture supports 1-10V dimming.
Q: What mounting options are available for this fixture?
A: This low-profile linear explosion proof fixture can be chain-cable mounted, recessed mounted, or surface mounted.
Web ID: 1933
