100 Watt LED High Temperature Light | 15000 Lumens | 5000K | 100-277V | Rated to 392F

Product Overview

This 100 watt LED high temperature fixture delivers 15,000 lumens at 5000K color temperature and operates in ambient temperatures from -40°F to 392°F. The fixture uses an external driver design with a standard 5-meter (15 ft) cord, allowing the driver to be positioned up to 68 feet away from the fixture head in a location where ambient temperature does not exceed 212°F.

The aluminum alloy housing incorporates a large heat sink to manage thermal load in extreme environments. At 150 lumens per watt, this fixture replaces 250 watt metal halide systems. The tempered glass lens provides a 120-degree beam angle. Rated lifespan is 100,000 hours at L70.

Mounting options include eye-hook, pendant, or yoke configurations. The fixture weighs 33 lbs with dimensions of 24 x 19.7 x 2.3 inches. This fixture does not support dimming.

Where This Product Fits Best

This fixture is built for locations where standard LED high bays cannot survive. The 392°F maximum operating temperature makes it suitable for foundries, glass manufacturing, steel processing, heat treatment facilities, industrial ovens, and other spaces where radiant or ambient heat exceeds the limits of conventional LED fixtures.

The external driver arrangement is central to how this fixture handles extreme heat. The driver must be installed where temperatures stay below 212°F, which typically means routing the cord through a wall, ceiling plenum, or structural barrier to reach a cooler zone. The 68-foot maximum cord length accommodates most facility layouts where the hot zone and driver mounting location are separated.

The -40°F lower limit also makes this fixture appropriate for cold storage, freezer environments, and outdoor installations in harsh climates where temperature swings span both extremes.

Performance and Functional Considerations

Output is fixed at 15,000 lumens with no dimming capability. CRI is 75+, which is typical for industrial environments where color accuracy is secondary to light level and durability. The 5000K color temperature provides neutral white light suited to task visibility in manufacturing and processing spaces.

The 120-degree beam angle from the tempered glass lens produces broad coverage. Voltage input ranges from 100V to 277V at 50/60 Hz. Power factor exceeds 0.95 and total harmonic distortion is below 15%, indicating stable electrical behavior on commercial power systems.

Surge protection is rated at 6kV, which provides a degree of tolerance against transient events common in industrial electrical environments.

Installation and Long-Term Use

The external driver installation is the defining factor in planning this fixture. The driver location must stay below 212°F, and the cord routing must be mapped during project planning. The standard 5-meter cord may be sufficient for many installations, but the 68-foot maximum separation gives flexibility for facilities where cooler mounting zones are farther from the fixture head.

Mounting hardware supports eye-hook, pendant, or yoke configurations. The fixture weighs 33 lbs, so structural support and rigging hardware should be selected accordingly. The aluminum alloy housing and IP66 rating allow the fixture to handle dust ingress and direct water jets, which is relevant for washdown areas or facilities with airborne particulates.

At 100,000 hours rated lifespan, lamp replacement intervals are extended significantly compared to metal halide systems. The external driver, being located in a cooler zone, is less exposed to thermal stress than the fixture head.

How This Fixture Is Commonly Used

Operators typically use this fixture where heat would destroy a standard LED high bay within weeks or months. The external driver design allows the light-emitting head to remain in the high-heat zone while the electronics stay in a protected location. This separation is what makes the fixture viable in steel mills, kilns, forges, and similar environments.

Once installed, the fixture runs at full output with no field-adjustable settings. Facilities that need dimming or tunable output should consider other products. This fixture is designed for continuous operation in fixed-output applications where reliability under thermal stress is the primary requirement.

The IP66 rating allows cleaning with pressurized water, which is useful in environments where soot, dust, or process residue accumulates on the lens. The tempered glass lens withstands cleaning and thermal cycling better than polycarbonate alternatives.

Safety, Certifications, and Warranty

This fixture is ETL listed. The IP66 rating means the fixture is protected against dust ingress and high-pressure water jets. The operating temperature range of -40°F to 392°F defines the environmental limits within which the fixture is designed to function.

We provide a 2-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture accept?
The fixture operates on 100V to 277V input at 50/60 Hz.

Can this fixture be dimmed?
No. This fixture does not support dimming.

What is the maximum ambient temperature rating?
The fixture head is rated to operate in ambient temperatures up to 392°F. The external driver must be installed where temperature does not exceed 212°F.

How far can the driver be mounted from the fixture?
The driver can be mounted up to 68 feet from the fixture head. A 5-meter (15 ft) cord is included as standard.

What mounting options are available?
The fixture supports eye-hook, pendant, or yoke mounting.

Is this fixture DLC listed?
DLC qualification is not indicated in the specifications for this product.

What is the warranty period?
This fixture carries a 2-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.