50 Watt LED High Temperature Light | 7500 Lumens | 5000K | 100-277V | Rated to 392F

Product Overview

This 50 watt LED high temperature fixture delivers 7500 lumens at 5000K and operates in ambient temperatures from -40°F to 392°F. The fixture replaces 250 watt metal halide systems and runs on 100-277V input at 50/60 Hz.

The design separates the LED head from the driver to protect electronics from extreme heat. The external driver connects via a standard 5 meter (15 ft) cord and can be mounted up to 68 feet from the fixture head. The driver must be installed where ambient temperature does not exceed 212°F.

Construction uses aluminum alloy housing with a tempered glass lens. The fixture measures 12.2 x 16.9 x 2.3 inches and weighs 15.4 lbs. Standard finish is silver.

Where This Product Fits Best

This fixture is built for locations where standard LED high bays cannot survive. The 392°F maximum operating temperature makes it suitable for foundries, forge shops, glass manufacturing, heat treat facilities, commercial bakeries, and industrial ovens where radiant or ambient heat exceeds normal fixture limits.

The -40°F low-end rating also supports cold storage, blast freezers, and outdoor industrial applications in extreme winter climates. IP66 ingress protection allows installation in washdown areas and locations exposed to heavy dust, steam, or direct water spray.

The external driver requirement means you need a second mounting location within 68 feet where temperatures stay below 212°F. This is typical in high-heat environments where control rooms, exterior walls, or adjacent spaces provide suitable driver mounting points.

Performance and Functional Considerations

Output is 7500 lumens from 50 watts, producing 150 lumens per watt. The 120° beam angle provides broad distribution suited to general area lighting rather than narrow aisle or task applications. Color temperature is fixed at 5000K with a CRI of 75+.

This fixture does not dim. If dimming is required for the application, a different fixture series is needed.

Power factor exceeds 0.95 and THD is below 15%, which supports stable operation on commercial and industrial electrical systems. Surge protection is rated at 6kV.

Installation and Long-Term Use

Mounting options include eye-hook, pendant, or yoke. Eye-hook and yoke mounts are standard. The fixture head installs at the work location; the driver installs remotely in a protected area.

The 5 meter cord included with the fixture covers most installations where the driver can be mounted nearby. For longer runs up to the 68-foot maximum, additional wiring is required between the driver and fixture head.

Rated lifespan is 100,000 hours at L70. The aluminum alloy housing and large integrated heat sink are designed to manage thermal stress over extended operation in high-temperature environments.

How This Fixture Is Commonly Used

Facility teams use this fixture in areas where heat destroys conventional LED equipment. The remote driver design means the sensitive electronics stay in a cooler location while the fixture head handles direct exposure to process heat or radiant energy from furnaces, ovens, or molten material.

When planning an installation, you need to identify both the fixture mounting point and a suitable driver location. The 212°F driver limit is the critical constraint. In most high-heat facilities, this means routing the cord through a wall, ceiling penetration, or conduit to reach an adjacent space, mezzanine, or exterior enclosure.

The IP66 rating means the fixture head can be hosed down during cleaning cycles without damage. This is common in food processing and industrial washdown environments where both heat and moisture are present.

Safety, Certifications, and Warranty

This fixture is ETL listed.

We provide a 2-year warranty on this product.

Frequently Asked Questions

What is the maximum operating temperature for this fixture?
The fixture head operates in ambient temperatures up to 392°F. The external driver must be installed where temperature does not exceed 212°F.

What voltage does this fixture require?
The fixture operates on 100-277V input at 50/60 Hz.

What does this fixture replace?
This 50 watt LED fixture replaces 250 watt metal halide systems.

Is this fixture dimmable?
No, this fixture does not support dimming.

What is the IP rating?
IP66. The fixture is protected against heavy dust ingress and powerful water jets from any direction.

What mounting options are available?
Eye-hook, pendant, or yoke mounting. Eye-hook and yoke are standard.

What is the warranty period?
2 years.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.