16 / 24 / 28 Watt Adjustable LED Vapor Tight Light | 2075 to 3200 Lumens | 3500K / 4000K / 5000K Adjustable | 100-277V | 2 Foot

Product Overview

This 2-foot LED vapor tight fixture delivers 2075 to 3200 lumens with field-adjustable wattage settings of 16, 24, or 28 watts. Color temperature is also adjustable on site, with options for 3500K, 4000K, or 5000K output. The fixture operates on 100-277V input and replaces 100 to 150 watt metal halide systems.

Construction uses a polycarbonate housing with a polycarbonate lens, weighing 3.3 pounds. Overall dimensions are 23 9/16 x 3 9/16 x 3 3/16 inches. The fixture carries a white finish and mounts to surfaces or walls.

Rated lifespan is 80,000 hours at greater than 115 lumens per watt across all output settings. CRI is 80+ with a standard 120-degree beam angle. This fixture does not support dimming.

Where This Product Fits Best

This vapor tight is sized for spaces where a 2-foot linear form factor fits existing layout or ceiling conditions. Typical applications include stairwells, mechanical rooms, parking structures, loading docks, wash-down areas, and cold storage entries where moisture, dust, or temperature extremes are present.

The IP66 rating allows installation where water jets and heavy dust exposure are expected. Operating temperature range of -40°F to 122°F supports both freezer environments and unconditioned spaces with high ambient heat.

Output range of 2075 to 3200 lumens suits task lighting in smaller enclosed spaces or supplemental lighting along corridors and utility areas. This fixture is not intended for high-bay mounting or large open floor coverage.

Performance and Functional Considerations

Field-adjustable wattage allows output to be set at 16, 24, or 28 watts depending on the light level required for the installed location. This adjustment is made at the fixture before or during installation. The corresponding lumen output is 2075, 2960, or 3200 lumens respectively.

Color temperature selection between 3500K, 4000K, and 5000K is also configured at the fixture. This allows a single fixture model to serve applications ranging from warmer corridor lighting to cooler task lighting in mechanical or storage areas.

Power factor exceeds 0.90, and the fixture includes 6kV surge protection. Voltage compatibility across 100-277V at 50-60Hz supports standard commercial electrical systems without requiring transformers or voltage-specific models.

Installation and Long-Term Use

Mounting options include surface or wall installation. At 3.3 pounds and under 24 inches in length, the fixture can be positioned in tight utility spaces, above doorways, or along narrow corridors without structural reinforcement.

The polycarbonate housing and lens withstand impact and chemical exposure common in wash-down and industrial environments. IP66 ingress protection allows direct water spray during cleaning without fixture damage.

With an 80,000-hour rated lifespan, the fixture supports extended service intervals in locations where access for maintenance is limited or disruptive. The 5-year warranty covers the fixture for the duration of typical relamping cycles in legacy systems.

How This Fixture Is Commonly Used

Once installed, facility teams use the wattage and color selectors to dial in output based on actual conditions in the space. A stairwell may need full output at 28 watts, while a storage closet may only require 16 watts. The same applies to color temperature, where 5000K may be preferred in a mechanical room for visibility, while 3500K suits a corridor adjacent to occupied space.

Because adjustments are made at the fixture, maintenance staff can reconfigure output if space use changes without replacing hardware. The 120-degree beam spreads light across walls and floors evenly in narrow or enclosed spaces, reducing shadowing in corners.

The non-dimming design means this fixture operates at the selected wattage level continuously. It is suited for spaces where constant illumination is appropriate rather than areas requiring occupancy-based dimming or daylight response.

Safety, Certifications, and Warranty

This fixture is UL listed and rebate eligible. We back the fixture with a 5-year warranty.

Surge protection is rated at 6kV, providing resilience against electrical transients common in industrial and commercial distribution systems. The IP66 rating allows exposure to high-pressure water and complete dust exclusion.

Frequently Asked Questions

What wattage and lumen options are available?
The fixture is adjustable to 16, 24, or 28 watts, producing 2075, 2960, or 3200 lumens respectively.

What color temperatures can be selected?
Field-selectable options are 3500K, 4000K, and 5000K.

What voltage does this fixture require?
It operates on 100-277V at 50-60Hz.

Is this fixture dimmable?
No, this fixture does not support dimming.

What is the IP rating?
IP66, allowing use in wet and dusty environments with direct water spray exposure.

What does this fixture replace?
It serves as a replacement for 100 to 150 watt metal halide fixtures.

What warranty coverage applies?
We provide a 5-year warranty on this fixture.

Is this fixture eligible for utility rebates?
Yes, this fixture is rebate eligible.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.