200 Watt Round Explosion Proof LED Light | 28000 Lumens | Class 1 Div 2 | Class 2 Div 2 | 5000K | 100V-277V | NSF Rated

Product Overview

This 200 watt round explosion proof LED fixture delivers 28,000 lumens at 5000K color temperature, operating at 140 lumens per watt. It serves as a direct replacement for 400 watt metal halide fixtures in hazardous location applications requiring Class I Division 2 or Class II Division 1 and Division 2 ratings.

The fixture is UL 844 listed for hazardous locations including Class I Division 2 Groups A, B, C, D, Class II Division 1 Groups E, F, G, Class II Division 2 Groups F, G, and Class III environments. It carries UL 1598 wet location suitability, UL 1598A marine outside type certification, and ABS approval for marine applications.

Construction consists of copper free aluminum housing with a polycarbonate lens. The fixture weighs 22.60 pounds with dimensions of 12.6 inches diameter by 9.2 inches height. NSF food grade rating allows installation in food processing and preparation areas where sanitation standards apply.

Where This Product Fits Best

This fixture is classified for environments where ignitable concentrations of flammable gases, vapors, or combustible dust may be present. Class I Division 2 covers areas where flammable gases or vapors are handled but normally contained. Class II Division 1 and Division 2 ratings cover combustible dust environments at varying risk levels.

The IP66 rating means this fixture is sealed against dust ingress and protected against high-pressure water jets from any direction. Combined with wet location listing and marine outside type certification, it handles outdoor installations, washdown areas, and marine deck or offshore platform mounting.

NSF food grade certification makes this fixture appropriate for food and beverage processing facilities, commercial kitchens, and any area subject to food safety inspection requirements. The operating temperature range of -40 degrees F to 140 degrees F supports cold storage, freezer, and high-ambient heat applications.

Performance and Functional Considerations

At 28,000 lumens from 200 watts, this fixture replaces 400 watt metal halide while reducing connected load by half. The 5000K color temperature provides neutral daylight-equivalent output suitable for task visibility and color recognition in industrial work areas. CRI of 80 or higher supports accurate color rendering for inspection tasks and general visibility.

The 120-degree beam angle delivers broad, even light distribution typical of high bay and area lighting applications. Dimming is available via 1-10V protocol for integration with compatible control systems. Input voltage range of 100V-277V at 50-60Hz accommodates standard commercial and industrial electrical systems. Power factor exceeds 0.95.

Rated lifespan is 50,000 hours to L70, meaning the fixture maintains at least 70 percent of initial lumen output through that service period. Surge protection is rated to 10kV, providing tolerance for electrical transients common in industrial power environments.

Installation and Long-Term Use

Mounting is via 3/4 inch NPT pendant connection, which is standard for explosion proof fixture installations using rigid conduit or flexible conduit with appropriate fittings. The 22.60 pound weight requires adequate structural support at the mounting point.

IK10 impact rating means the housing and lens assembly withstands significant mechanical impact, suitable for areas with forklift traffic, material handling, or other physical hazard exposure. The copper free aluminum housing resists corrosion in chemical and marine environments where standard aluminum may degrade.

The polycarbonate lens provides impact resistance while maintaining optical clarity. In food processing environments, the NSF rated construction allows for cleaning and sanitation procedures without compromising the fixture enclosure or ratings.

How This Fixture Is Commonly Used

Once installed, this fixture operates as a fixed-output or dimmed light source depending on whether 1-10V dimming is connected. Without a dimming signal, the fixture runs at full output. With 1-10V control wiring connected to a compatible dimmer or building automation system, output can be reduced as needed for occupied versus unoccupied periods or daylight harvesting scenarios.

In hazardous locations, the sealed housing and certified construction mean the fixture requires no special operational handling beyond standard maintenance access procedures for the classified area. The broad 120-degree beam angle means fewer fixtures may be needed to cover a given floor area compared to narrow-beam alternatives, though actual quantities depend on mounting height and target light levels for the specific space.

For facilities subject to food safety audits, the NSF rating provides documented compliance for lighting equipment in production zones. The wet location and marine ratings allow pressure washing and hose-down cleaning without concern for water ingress.

Safety, Certifications, and Warranty

This fixture is ETL listed and carries UL 844 hazardous location certification for the Class and Division ratings described above. It is UL 1598 listed for wet locations and UL 1598A certified as marine outside type. ABS certification supports maritime and offshore installations. NSF rating confirms food grade suitability.

The fixture is rebate eligible where utility incentive programs apply. We provide a 5 year warranty on this product.

Frequently Asked Questions

What voltage does this fixture accept?
The fixture operates on 100V-277V input at 50-60Hz.

What hazardous location classifications does this fixture carry?
It is rated for Class I Division 2 Groups A, B, C, D, Class II Division 1 Groups E, F, G, Class II Division 2 Groups F, G, and Class III.

Is this fixture suitable for outdoor or wet environments?
Yes. It carries UL 1598 wet location listing, UL 1598A marine outside type certification, and IP66 rating for dust and water protection.

Can this fixture be used in food processing areas?
Yes. It is NSF rated for food grade applications.

What is the warranty coverage?
This fixture includes a 5 year warranty.

Is this fixture rebate eligible?
Yes. The fixture is rebate eligible where applicable utility programs exist.

What does this fixture replace?
It serves as a replacement for 400 watt metal halide fixtures.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.