60 Watt Round Explosion Proof LED Light | 8400 Lumens | Class 1 Div 2 | Class 2 Div 2 | 5000K | 100V-277V | NSF Rated

Product Overview

This 60 watt round explosion proof LED light delivers 8400 lumens at 5000K color temperature, operating at 140 lumens per watt. The fixture replaces 250 watt metal halide systems and operates on 100V-277V input at 50-60Hz with a power factor greater than .95.

The housing is constructed from copper free aluminum with a polycarbonate lens. The fixture carries IP66 and IK10 ratings, 10kV surge protection, and operates across a temperature range of -40°F to 140°F. Mounting is via 3/4 inch NPT pendant connection.

This fixture is UL 844 listed for hazardous locations including Class I Division 2 Groups A, B, C, D; Class II Division 1 Groups E, F, G; Class II Division 2 Groups F, G; and Class III environments. Additional listings include UL 1598 Suitable for Wet Locations, UL 1598A Marine Outside Type, and ABS certification. The fixture is ETL listed and NSF rated for food grade applications.

Where This Product Fits Best

This fixture is built for hazardous location environments where flammable gases, vapors, combustible dusts, or ignitable fibers may be present. The Class I Division 2 rating covers areas where volatile substances are handled but not normally present in ignitable concentrations during normal operations. Class II Division 1 and Division 2 ratings extend coverage to combustible dust environments across multiple dust groups.

The NSF food grade rating makes this fixture appropriate for food and beverage processing areas where sanitation standards require equipment that can be cleaned without harboring contaminants. The UL 1598A Marine Outside Type listing supports installation on marine vessels and offshore platforms exposed to salt air and weather.

The IP66 rating means the fixture is sealed against dust ingress and protected against high-pressure water jets from any direction. The IK10 rating means the housing withstands high-impact physical contact. These characteristics support installation in wash-down areas, outdoor industrial yards, and facilities where equipment is exposed to physical abuse or aggressive cleaning.

Performance and Functional Considerations

At 8400 lumens from 60 watts, this fixture operates at 140 lumens per watt. The 5000K color temperature provides neutral white light with a CRI of 80+, suitable for environments where accurate color rendering supports visual tasks or inspection work.

The 120-degree beam angle distributes light across a wide area from pendant mount positions. The polycarbonate lens provides impact resistance while maintaining optical clarity. Rated lifespan is 50,000 hours at L70, meaning the fixture maintains at least 70% of initial lumen output through that operating period.

The 1-10V dimming capability allows output adjustment when connected to compatible control systems. Surge protection is rated to 10kV, which provides a level of resilience against transient voltage events common in industrial electrical environments.

Installation and Long-Term Use

The fixture mounts via 3/4 inch NPT pendant connection, which is a standard threaded fitting used with rigid conduit or pendant stems in hazardous location wiring methods. The 100V-277V input range covers common single-phase commercial and industrial voltages without requiring transformer matching.

The copper free aluminum housing resists corrosion in environments where copper content can cause material degradation, such as certain chemical processing or marine settings. The -40°F to 140°F operating range supports installation in cold storage, outdoor northern climates, and high-ambient industrial spaces.

The sealed construction and impact-rated housing reduce long-term maintenance exposure. In food processing or pharmaceutical environments, the NSF rating confirms the fixture meets material and design requirements for equipment used in areas where food safety is regulated.

How This Fixture Is Commonly Used

Once installed, this fixture runs as a direct replacement for 250 watt metal halide in hazardous location applications. Facilities converting from HID lighting in grain handling, chemical storage, paint spray booths, or fuel transfer areas use this fixture to maintain code-compliant illumination at lower operating wattage.

In food and beverage plants, the NSF rating allows installation in production and packaging areas where health inspectors review equipment compliance. The sealed housing and smooth exterior surfaces support cleaning protocols without creating areas where bacteria or contaminants can accumulate.

The 1-10V dimming input allows integration with facility lighting controls where dimming zones are used for energy management or task-specific light levels. Facilities operating across multiple shifts sometimes reduce output during low-activity periods while maintaining code-required minimum illumination.

Safety, Certifications, and Warranty

This fixture is UL 844 listed for hazardous locations covering Class I Division 2, Class II Division 1, Class II Division 2, and Class III environments. It is UL 1598 listed as Suitable for Wet Locations and UL 1598A listed as Marine Outside Type. The fixture carries ABS certification for marine applications and ETL listing.

The NSF rating confirms the fixture meets requirements for food grade applications. The fixture is rebate eligible under applicable utility incentive programs.

We back this fixture with a 5 year warranty.

Frequently Asked Questions

What hazardous location classifications does this fixture cover?
Class I Division 2 Groups A, B, C, D; Class II Division 1 Groups E, F, G; Class II Division 2 Groups F, G; and Class III.

What voltage range does this fixture accept?
100V-277V at 50-60Hz.

Is this fixture dimmable?
Yes, it accepts 1-10V dimming input.

What is the IP and IK rating?
IP66 and IK10.

Is this fixture NSF rated?
Yes, it is NSF rated for food grade applications.

What is the warranty period?
5 years.

Is this fixture eligible for utility rebates?
Yes, it is rebate eligible.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.