Skip to content

Explosion Proof Junction Box | 1/2 in or 3/4 in NPT | Surface Mounted | Built-in Motion Sensor | Class 1 Div 1

SKU: MLLG-E-MS-C1D1-JB Web ID: 2364
Starting at: $636.00
Built to Order 6 Weeks

Lighting a large indoor space?

Get a free lighting plan and volume pricing to ensure uniform illumination without overbuying fixtures.

Get Contractor or Bulk Pricing

Get your quote within 1 hour!

Call to Order: (888) 423-3191

This junction box suits hazardous and marine lighting installations requiring Class I, II, or III coverage and wet-location suitability. Its built-in on/off motion sensor can support simple occupancy-based control, while IP65 protection and UL 1598A Marine Outside Type listing support demanding environments. Surface mounting with a standard 3/4 inch knockout, plus a 1/2 inch special-order option, offers practical wiring flexibility for wall or ceiling installations.

Dwayne Kula | President, CTO and Founder

Prefer to Order Online?

Out of stock

Product Specifications

ETL Listed - Certified for Product Safety Compliance to North American StandardsClass 1 Division 2 - UL844 Certified for Explosive Atmospheres5 Year Unlimited Usage Warranty

UL Specs

  • UL 844 Hazardous Locations
  • Class I, Division 1, Groups C,D
  • Class I, Division 2, Groups A, B, C, D
  • Class II, Division 1, Groups E, F, G
  • Class II, Division 2, Groups F, G
  • Class III
  • UL 1598 Suitable for Wet Locations
  • UL 1598A Marine Outside Type
  • ABS

Key Features

BrandLED Lighting Supply
MountingSurface

Durable Construction

IP RatingIP65
CertificationsETL
Warranty5 years

Measurements

Dimensions (in)5.6 x 5.6 x 4.2

Features/Accessories

  • Motion Sensor

Product Lighting Layout Estimator

Use this estimator to calculate approximate fixture count, spacing, and average foot-candles for a simple rectangular space using the selected LED fixture. Enter your room dimensions, mounting height, target foot-candles, light loss factor, and room/layout condition to generate a preliminary lighting layout. When IES photometry is available, workplane height and room reflectance controls are shown.

Project Inputs

Loading fixture information...

Estimated Results

Fixtures --
Layout --
Estimated Avg FC --
Approx. Spacing --
Fixture Offset --
Calculation Method: --
Top-Down Fixture Layout Fixture positions and estimated floor light levels
Lower estimated FC Near target Higher estimated FC

Estimated average foot-candles are preliminary and should be verified with a lighting plan for project-critical applications.

Room / Layout Condition: This field is used only when usable IES photometry is not available. In fallback mode, it acts as a simplified room utilization factor for reflectance, fixture distribution, racking, obstructions, and how much fixture light reaches the work area. Open / light-colored spaces use 0.90, typical warehouses or shops use 0.75, racked or obstructed spaces use 0.60, and dark or complex spaces use 0.45. When IES photometry is active, this field is hidden and the estimator uses the selected workplane height, LLF, and simplified reflectance adjustment instead.

Photometry / Simulation Note: When usable IES photometry is available for the selected fixture, this estimator uses the fixture’s IES candela data, selected workplane height, light loss factor, and simplified reflectance adjustment to estimate fixture count, average foot-candles, and visual light distribution. The reflectance adjustment is a conservative approximation and is not a full zonal-cavity, radiosity, or professional photometric room calculation. When IES photometry is not available, the estimator uses a simulated beam model based on lumens, mounting height, room/layout condition, light loss factor, and beam angle.

Preliminary Estimate Only: This estimator is intended for simple square or rectangular spaces and should be used as a planning aid, not a final photometric lighting plan. Actual light levels may vary based on fixture optics, selected IES file, mounting conditions, workplane height, ceiling height, surface reflectance, obstructions, controls, voltage, installation conditions, and site-specific requirements. Project-critical applications should be verified with a formal lighting plan.

Need Verified Light Levels?

This estimate is a starting point. Warehouses, industrial facilities, hazardous locations, sports areas, schools, healthcare spaces, public areas, and code-sensitive projects may require a reviewed lighting layout before purchase or installation.

Estimator Version 2.9.21

Product Overview

This Class 1 Division 1 explosion proof junction box is designed for hazardous location lighting connections. It includes a built-in motion sensor with on/off operation and can be wall or ceiling mounted.

A 3/4-inch knockout is standard. A 1/2-inch knockout configuration is available by special order.

Adjustability and Control Options

The built-in motion sensor provides on/off control only. It is intended for installations that require occupancy-based switching without dimming control.

Build Quality and Physical Characteristics

The IP65 enclosure measures 5.6 x 5.6 x 4.2 inches. Its enclosed construction is suited to wet-location installations within its listed classifications.

Where This Product Fits Best

This junction box is suited to hazardous lighting installations requiring an explosion proof enclosure and on/off motion sensing.

  • hazardous location lighting
  • explosion proof lighting
  • paint booth lighting

Safety, Certifications, and Warranty

UL 844 hazardous location classifications include Class I, Division 1, Groups C and D; Class I, Division 2, Groups A, B, C, and D; Class II, Division 1, Groups E, F, and G; Class II, Division 2, Groups F and G; and Class III. The junction box is also UL 1598 suitable for wet locations, UL 1598A Marine Outside Type, ABS, and ETL certified. It carries a 5-year warranty.

Frequently Asked Questions

Q: Does this explosion proof junction box include a motion sensor?

A: Yes. This explosion proof junction box includes a built-in motion sensor with on/off operation only.

Q: What knockout size does this junction box use?

A: This explosion proof junction box has a standard 3/4-inch knockout, with a 1/2-inch knockout available by special order.

Web ID: 2364