20 Foot Round Fiberglass Light Pole | 5.75 Inch Diameter | Anchor Base

Product Overview

This 20 foot round fiberglass light pole has a 5.75 inch base diameter tapering to 5.3 inches at the tip. The pole weighs 57 pounds and uses an anchor base mounting system with a bolt circle ranging from 8 to 9.5 inches.

The pole is finished with acrylic enamel and is available in bronze or custom colors. Anchor bolts are 3/4 inch by 24 inch with a 3 inch leg, 4 inch thread, and 2.75 inch projection.

Where This Product Fits Best

This fiberglass pole is sized for area lighting applications using decorative or standard post top fixtures. The 20 foot height and tapered profile suit parking areas, pathways, building perimeters, and other outdoor spaces where moderate mounting height is appropriate.

The fiberglass construction offers corrosion resistance in environments where steel poles would degrade, including coastal areas, chemical exposure zones, and high-moisture locations. At 57 pounds, the pole is significantly lighter than comparable steel or aluminum poles, which affects handling and installation logistics.

Performance and Functional Considerations

Wind load capacity is expressed as Effective Projected Area. This pole supports 5.5 EPA at 70 mph, 5 EPA at 80 mph, 4 EPA at 90 mph, and 3 EPA at 100 mph. These values determine the maximum fixture size and quantity the pole can support based on local wind speed requirements.

Fixture selection must account for EPA ratings. Larger fixtures or multiple fixtures reduce the available EPA budget. Sites in high wind zones require careful fixture sizing to stay within the rated capacity at the applicable design wind speed.

Installation and Long-Term Use

This pole uses an anchor base installation method. The bolt circle accommodates configurations from 8 to 9.5 inches. Anchor bolts are 3/4 inch diameter by 24 inch length with a 3 inch leg, 4 inch thread, and 2.75 inch projection above the foundation.

Foundation design and final pole assembly are the responsibility of the installer and purchaser. LED Lighting Supply does not provide foundation specifications or assume responsibility for improper loading of fixtures, attachments, or foundation design. Dimensions and specifications are subject to change; refer to the current data sheet for verified pole data.

The acrylic enamel finish provides weather protection for the fiberglass surface. Custom colors are available for large order quantities only. Pole caps are used when other mounting options are not selected.

How This Fixture Is Commonly Used

Installers typically select this pole for post top fixture installations where a clean, round profile is preferred over square poles. The tapered diameter from 5.75 inches at the base to 5.3 inches at the tip accommodates standard post top mounting hardware.

The 57 pound weight allows smaller crews to handle the pole compared to heavier steel alternatives. Fiberglass does not conduct electricity, which can be a consideration in certain installation environments. The 8 to 9.5 inch bolt circle range provides flexibility when matching to existing foundation layouts or standard anchor bolt templates.

Safety, Certifications, and Warranty

This pole carries a 15 year workmanship warranty. The warranty covers defects from the manufacturing process, including welds and structural integrity, for the stated period from date of purchase.

The warranty does not cover damage from external factors, misuse, or normal wear and tear. LED Lighting Supply is not responsible for improper loading, use, or foundation design.

Frequently Asked Questions

What is the bolt circle range for this pole?
The bolt circle ranges from 8 to 9.5 inches.

What anchor bolt size is required?
The pole uses 3/4 inch by 24 inch anchor bolts with a 3 inch leg, 4 inch thread, and 2.75 inch projection.

What is the EPA rating at 100 mph wind speed?
The pole supports 3 EPA at 100 mph.

What colors are available?
Bronze is the standard finish. Custom colors are available for large order quantities.

What does the warranty cover?
The 15 year workmanship warranty covers manufacturing defects such as welds and structural integrity. It does not cover external damage, misuse, or normal wear.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.