5 Watt Explosion Proof Exit Emergency LED Light | Class 1 Div 1 | Left and Right Arrows
Dwayne Kula | President, CTO and Founder
Product Specifications
UL Specs
- UL 844 Hazardous Locations
- Class I, Division 1, Groups C, D
- Class I, Division 2, Groups A, B, C, D
- Class II, Division 1, Groups E, F, G
- Class II, Division 2, Groups F, G
- Class III
- UL 924 Emergency Lighting
- UL 1598A Marine Outside Type
- UL 1598 Wet Locations
- UL 8750 LED Safety
Key Features
| Brand | LED Lighting Supply |
| Watts | 5 |
| Voltage | 100V-277V |
| Dimming | No |
| Optics | Tempered Glass Lens |
| Lifespan | 50,000 (L70) hours |
| Mounting | Chain-Cable or 3/4 in NPT Pendant |
| Frequency (Hz) | 50-60Hz |
| Power Factor | >.95 |
| THD | < 10% |
Durable Construction
| Housing | Aluminum Alloy |
| IP Rating | IP66 |
| IK Rating | IK10 |
| Operating Temperature | -40°F to 140°F |
| Certifications | ETL | Rebate Eligible |
| Warranty | 5 years |
Measurements
| Dimensions (in) | 16 X 11.7 |
| Weight (lbs) | 14 |
Product Lighting Layout Estimator
Use this estimator to calculate approximate fixture count, spacing, and average foot-candles for a simple rectangular space using the selected LED fixture. Enter your room dimensions, mounting height, target foot-candles, light loss factor, and room/layout condition to generate a preliminary lighting layout. When IES photometry is available, workplane height and room reflectance controls are shown.
Project Inputs
Estimated Results
Estimated average foot-candles are preliminary and should be verified with a lighting plan for project-critical applications.
Room / Layout Condition: This field is used only when usable IES photometry is not available. In fallback mode, it acts as a simplified room utilization factor for reflectance, fixture distribution, racking, obstructions, and how much fixture light reaches the work area. Open / light-colored spaces use 0.90, typical warehouses or shops use 0.75, racked or obstructed spaces use 0.60, and dark or complex spaces use 0.45. When IES photometry is active, this field is hidden and the estimator uses the selected workplane height, LLF, and simplified reflectance adjustment instead.
Photometry / Simulation Note: When usable IES photometry is available for the selected fixture, this estimator uses the fixture’s IES candela data, selected workplane height, light loss factor, and simplified reflectance adjustment to estimate fixture count, average foot-candles, and visual light distribution. The reflectance adjustment is a conservative approximation and is not a full zonal-cavity, radiosity, or professional photometric room calculation. When IES photometry is not available, the estimator uses a simulated beam model based on lumens, mounting height, room/layout condition, light loss factor, and beam angle.
Preliminary Estimate Only: This estimator is intended for simple square or rectangular spaces and should be used as a planning aid, not a final photometric lighting plan. Actual light levels may vary based on fixture optics, selected IES file, mounting conditions, workplane height, ceiling height, surface reflectance, obstructions, controls, voltage, installation conditions, and site-specific requirements. Project-critical applications should be verified with a formal lighting plan.
This estimate is a starting point. Warehouses, industrial facilities, hazardous locations, sports areas, schools, healthcare spaces, public areas, and code-sensitive projects may require a reviewed lighting layout before purchase or installation.
Product Overview
This 5 watt explosion proof exit emergency LED light provides marked emergency egress direction with left and right arrows for hazardous locations. It operates on 100-277V, 50-60Hz power and is non-dimming.
The fixture is designed for hazardous-location emergency lighting installations that require UL 924 emergency lighting coverage along with UL 844 hazardous-location certification.
Core Performance and Output
The 5 watt LED system has a power factor greater than 0.95 and total harmonic distortion below 10%. Its 50,000-hour L70 rating describes the point at which LED output is expected to reach 70% of initial output.
Longevity and Reliability
An aluminum alloy housing, tempered glass lens, IP66 rating, and IK10 impact rating provide a protected fixture construction. The operating temperature range is -40 F to 140 F.
Build Quality and Physical Characteristics
The fixture measures 16 x 11.7 inches and weighs 14 pounds. It can be mounted by chain-cable or through a 3/4 inch NPT pendant connection.
Where This Product Fits Best
This emergency exit fixture is suited to hazardous-location installations requiring directional egress marking and emergency lighting equipment with the applicable classified-location ratings.
- hazardous location lighting
- explosion proof lighting
- paint booth lighting
- chemical processing facility lighting
- oil and gas facility lighting
- refinery lighting
- marine environment lighting
- offshore rig lighting
Safety, Certifications, and Warranty
This fixture is UL 844 listed for Class I, Division 1, Groups C and D; Class I, Division 2, Groups A, B, C, and D; Class II, Division 1, Groups E, F, and G; Class II, Division 2, Groups F and G; and Class III locations. It is also UL 924 emergency lighting, UL 1598A Marine Outside Type, UL 1598 wet locations, and UL 8750 LED safety certified. ETL certification is included.
The fixture carries a 5-year warranty and is rebate eligible.
Frequently Asked Questions
Q: What mounting methods does this explosion proof exit emergency light support?
A: This explosion proof exit emergency LED light supports chain-cable mounting or 3/4 inch NPT pendant mounting.
Q: Is this exit emergency light rated for Class I, Division 1 locations?
A: Yes. This exit emergency LED light is UL 844 listed for Class I, Division 1, Groups C and D locations.
Web ID: 2308
