70 Watt Full Cutoff Half Moon LED Wall Pack | 9445 Lumens | 4000K or 5000K | 100-277V | Built-In Photocell

Product Overview

This 70 watt full cutoff half moon LED wall pack delivers 9445 lumens at 135 lumens per watt. It replaces 250 watt metal halide fixtures and operates on 100-277V input. The fixture is available in 4000K or 5000K color temperature with a CRI of 70+.

The die-cast aluminum housing has a bronze finish and measures 14 x 7.5 x 7.5 inches at 7.5 pounds. A polycarbonate lens covers the 90-degree beam angle optics. The built-in photocell enables automatic dusk-to-dawn operation without additional controls.

Full cutoff optical design directs all light output downward and outward with no uplight component. This controls light trespass and limits sky glow in areas where fixture shielding is required.

Where This Product Fits Best

This wall pack is sized for perimeter lighting on commercial and industrial buildings where 250 watt metal halide fixtures are currently installed. The 9445 lumen output and full cutoff distribution make it appropriate for building facades, loading dock areas, rear entries, and parking lot perimeters.

The 100-277V input range covers standard commercial voltage configurations across single-phase systems. Operating temperature range of -22°F to 113°F allows installation in cold storage entry zones and facilities in extreme climates.

IP65 rating allows use in fully exposed outdoor locations subject to rain, snow, and hose-directed water during washdowns. The full cutoff design addresses dark sky requirements and property line setback concerns where uplight must be eliminated.

Performance and Functional Considerations

At 70 watts with 9445 lumens, this fixture produces output comparable to 250 watt metal halide while drawing significantly less power. The 135 lumens per watt efficacy reflects current LED performance for this fixture class.

The built-in photocell activates the fixture at dusk and deactivates at dawn automatically. This eliminates the need for timers or manual switching for basic overnight security lighting schedules.

1-10V dimming capability allows connection to building management systems or compatible dimming controls where reduced output is needed during specific hours. Power factor exceeds 0.90 and total harmonic distortion is below 20%, which addresses electrical system compatibility in commercial facilities.

Installation and Long-Term Use

The fixture mounts directly to vertical wall surfaces using the integrated mounting plate. Wall mount orientation positions the half moon shape with the flat edge against the building and the curved lens facing outward and downward.

At 7.5 pounds, the fixture weight is manageable for single-person installation on ladders or lifts. The 100-277V universal input eliminates voltage matching concerns across most commercial service configurations.

Rated lifespan is 70,000 hours. The die-cast aluminum housing and IP65 sealing protect internal components from moisture and dust intrusion over the service life.

How This Fixture Is Commonly Used

Facilities replacing aging metal halide wall packs use this fixture as a direct swap where 250 watt HID units are currently mounted. The bronze finish blends with typical commercial building exteriors without drawing attention to the fixture itself.

The built-in photocell handles basic on-off scheduling without any external timer or control wiring. For facilities that want reduced output during late-night hours, the 1-10V dimming input accepts a signal from a compatible controller or building automation system.

The 4000K option provides a neutral white appearance suited to general commercial facades. The 5000K option produces a cooler, more daylight-like output often selected for industrial yards and security-focused applications where visibility is the priority over ambiance.

Safety, Certifications, and Warranty

This fixture is UL listed. It is rebate eligible through qualifying utility programs.

IP65 rating means the fixture is protected against dust ingress and low-pressure water jets from any direction. This allows installation in exposed outdoor locations without additional weatherproofing.

We back this fixture with a 5-year warranty.

Frequently Asked Questions

What voltage does this wall pack require?
The fixture operates on 100-277V input at 50-60Hz, covering standard commercial single-phase configurations.

What metal halide wattage does this replace?
This 70 watt LED wall pack replaces 250 watt metal halide fixtures.

Is this fixture rebate eligible?
Yes, this fixture is rebate eligible. Check with your local utility for program requirements and qualifying criteria.

Can this fixture be dimmed?
Yes, the fixture accepts 1-10V dimming signals for integration with compatible controls.

What is the warranty coverage?
This fixture includes a 5-year warranty.

Is the photocell built in or separate?
The photocell is built into the fixture for automatic dusk-to-dawn operation.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.