17 / 25 / 30 Watt Adjustable LED Flood Light | 2890 to 5100 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Built-In Photocell

Product Overview

This LED flood light delivers selectable output of 17, 25, or 30 watts with corresponding lumen output of 2,890, 4,250, or 5,100 lumens. Color temperature is also field-adjustable between 3000K, 4000K, and 5000K. A built-in photocell provides automatic dusk-to-dawn operation without additional components.

The fixture operates on 100-277V input at 50-60Hz and replaces 150-watt metal halide fixtures. Efficacy is rated at 153 lumens per watt across all output settings. The 120-degree beam angle uses tempered glass optics.

Housing is die-cast aluminum with anti-corrosion powder coating in bronze finish. The fixture measures 10.8 inches by 8.0 inches by 2.5 inches and weighs 2.5 pounds. Mounting is available in yoke or knuckle configuration.

Where This Product Fits Best

This fixture is sized for building-mounted applications where 150-watt metal halide fixtures are currently installed. The output range of 2,890 to 5,100 lumens suits wall packs, entrance lighting, perimeter security, signage illumination, and parking area supplemental lighting where moderate output is appropriate.

The IP65 rating allows installation in locations exposed to rain, dust, and outdoor debris. Operating temperature range of -40 degrees F to 113 degrees F supports year-round outdoor use in most climates. The 0.8 EPA rating keeps wind load manageable on poles and wall mounts.

The built-in photocell eliminates the need for external controls or timers in straightforward dusk-to-dawn applications. This fixture does not dim, so it is not appropriate where variable output control is required.

Performance and Functional Considerations

Wattage and color temperature are both adjustable in the field before final installation. This allows output and appearance to be matched to site conditions without returning product. The 153 lumens-per-watt efficacy remains consistent across all three wattage settings.

CRI is rated at 80+, which provides acceptable color rendering for general outdoor security and area lighting. The 50,000-hour L70 lifespan reflects the point at which output will have declined to 70 percent of initial lumens. Power factor is 0.9 with THD at 15 percent.

The fixture is not dimmable and does not support integration with building automation or external lighting controls beyond the integrated photocell.

Installation and Long-Term Use

The fixture accepts either yoke or knuckle mounting depending on the configuration selected. Die-cast aluminum construction and powder-coated bronze finish resist corrosion and UV degradation in outdoor installations. At 2.5 pounds, the fixture does not impose significant structural demands on mounting surfaces.

Wattage and color temperature selections are made at installation using onboard switches. Once configured, the fixture operates automatically via the integrated photocell with no routine adjustment required. The tempered glass lens withstands temperature cycling and resists impact better than acrylic alternatives.

How This Fixture Is Commonly Used

Facilities replacing aging metal halide wall packs or flood lights use this fixture to reduce energy draw while maintaining or improving light output. The three wattage settings allow installers to tune output to actual site needs rather than accepting a fixed value that may over-light or under-light the area.

The selectable color temperature addresses situations where warmer light is preferred near building entrances or where cooler light is needed for security visibility. The built-in photocell handles on-off switching automatically, so no external timers or manual intervention are needed after commissioning.

Safety, Certifications, and Warranty

This fixture is UL listed. It is rebate eligible through applicable utility programs.

IP65 rating means the fixture is protected against dust ingress and water projected from a nozzle in any direction. We provide a 5-year warranty on this product.

Frequently Asked Questions

What wattage and lumen options are available?
The fixture is adjustable between 17, 25, and 30 watts with corresponding lumen outputs of 2,890, 4,250, and 5,100.

What color temperatures can be selected?
3000K, 4000K, and 5000K are available. Selection is made using an onboard switch.

What voltage does this fixture require?
The fixture operates on 100-277V input at 50-60Hz.

Is this fixture dimmable?
No. This fixture does not support dimming.

What is the IP rating?
IP65. The fixture is protected against dust and water spray from any direction.

What mounting options are available?
Yoke or knuckle mount configurations are available.

What is the warranty?
5 years.

Is this fixture rebate eligible?
Yes. The fixture is rebate eligible through applicable utility programs.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.