130 / 140 / 165 Watt Adjustable Linear LED High Bay | 19500 to 24750 Lumens | 4000K / 5000K Adjustable | 100-277V | 2 Foot

Product Overview

This 2-foot linear LED high bay delivers field-adjustable output from 130 to 165 watts, producing 19,500 to 24,750 lumens at 150 lumens per watt. The fixture replaces 400-watt metal halide systems and operates on 100-277V input with 0-10V dimming capability.

Color temperature is adjustable between 4000K and 5000K. The die-cast aluminum housing with white finish includes a frosted lens providing 120-degree beam distribution. Rated lifespan is 100,000 hours at L70.

The fixture supports chain-cable, pendant, or surface mounting configurations. Overall dimensions are 23.2 x 12.6 x 3 inches with a weight of 6.75 pounds. No cord is included with the fixture.

Where This Product Fits Best

This linear high bay is sized for spaces currently using 400-watt metal halide fixtures. The 2-foot form factor and adjustable output range make it appropriate for aisles, manufacturing bays, and open floor areas where linear fixture runs are preferred over round high bays.

Operating temperature range spans -40 degrees F to 113 degrees F, supporting both cold storage environments and facilities with elevated ambient heat. The 100-277V input handles standard commercial and industrial electrical systems without requiring dedicated transformers.

The 6kV surge protection rating provides tolerance for electrical disturbances common in industrial facilities with heavy motor loads or inconsistent power quality.

Performance and Functional Considerations

Wattage selection between 130, 140, and 165 watts directly determines lumen output at 19,500, 21,000, or 24,750 lumens respectively. The 150 lumens per watt efficacy remains consistent across all three settings.

The frosted lens produces a 120-degree beam spread suited for general area lighting rather than focused aisle illumination. CRI is rated at 80 or higher, acceptable for most warehouse and manufacturing applications where color rendering is not critical.

Power factor of 0.90 and THD maximum of 20 percent meet typical utility and facility electrical standards. The fixture operates on both 50Hz and 60Hz systems.

Installation and Long-Term Use

Three mounting methods are supported: chain-cable suspension as standard, pendant mount, or surface mount. The 6.75-pound weight is manageable for single-installer handling during positioning. No cord is supplied, so field wiring is required.

Wattage and color temperature adjustments are made at the fixture before final installation or during maintenance access. This allows output tuning based on actual conditions observed after initial energization.

The 100,000-hour L70 lifespan reduces relamping frequency compared to metal halide systems. 0-10V dimming allows integration with building automation or manual dimmer controls where installed.

How This Fixture Is Commonly Used

Facilities replacing aging 400-watt metal halide high bays use this fixture to maintain comparable light levels while reducing energy consumption. The wattage selector allows adjustment if initial output proves higher or lower than required for the space.

Color temperature selection between 4000K and 5000K is typically chosen based on existing facility lighting or task requirements. Cooler 5000K provides higher perceived brightness, while 4000K offers a warmer tone some operators prefer for extended occupancy areas.

A motion sensor is available with this fixture. A remote control is required to change default sensor settings, with one remote typically used per project.

Safety, Certifications, and Warranty

This fixture is UL listed and DLC Premium qualified. The DLC Premium listing may support utility rebate eligibility where programs are offered.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture require?
The fixture operates on 100-277V input, compatible with standard commercial and industrial electrical systems in this voltage range.

What wattage and lumen options are available?
Output is adjustable between 130 watts at 19,500 lumens, 140 watts at 21,000 lumens, and 165 watts at 24,750 lumens.

Is this fixture DLC listed for rebates?
Yes, this fixture carries DLC Premium qualification.

What mounting options are supported?
Chain-cable suspension is standard. Pendant mount and surface mount configurations are also supported.

What is the warranty period?
This fixture includes a 5-year warranty.

Can this fixture be used in cold environments?
The operating temperature range extends to -40 degrees F, supporting cold storage and freezer applications.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.