80 / 90 / 105 Watt Adjustable Linear LED High Bay | 12000 to 15750 Lumens | 4000K / 5000K Adjustable | 100-277V | 2 Foot

Product Overview

This 2-foot linear LED high bay delivers field-adjustable output from 80 to 105 watts, producing 12,000 to 15,750 lumens depending on the selected wattage setting. The fixture operates at 150 lumens per watt across all output levels and replaces 150W, 250W, or 400W metal halide fixtures depending on the configuration used.

Color temperature is adjustable between 4000K and 5000K, allowing the fixture to be configured for the lighting conditions required in each space. The frosted lens produces a 120-degree beam angle with a CRI of 80+. Voltage input spans 100V to 277V at 50/60 Hz.

The fixture housing is die-cast aluminum with a white finish. It measures 23.2 x 12.6 x 3 inches and weighs 6.75 pounds. Rated lifespan is 100,000 hours at L70.

Where This Product Fits Best

This fixture is sized for applications where a compact linear form factor is preferred over round or square high bay designs. The 2-foot length works well in spaces with structural constraints or where fixtures need to align with narrow ceiling bays or racking aisles.

The operating temperature range of -40°F to 113°F supports installation in cold storage environments, unheated warehouses, and temperature-controlled manufacturing areas. The 6kV surge protection provides tolerance against electrical transients common in industrial electrical systems.

Output adjustability makes this fixture appropriate for spaces where lighting requirements may vary by zone or where a single fixture type needs to serve multiple mounting heights or task areas within the same facility.

Performance and Functional Considerations

Wattage selection between 80W, 90W, and 105W directly determines lumen output. At 80W, the fixture produces 12,000 lumens. At 90W, output increases to 13,500 lumens. At 105W, output reaches 15,750 lumens. Efficiency remains constant at 150 lumens per watt regardless of the selected setting.

The 0-10V dimming input allows integration with building automation systems or manual dimmers for output control beyond the fixed wattage settings. Power factor is 0.90 with a maximum THD of 20%.

A motion sensor is available for this fixture. A remote control is required to change the default sensor settings, with one remote needed per project.

Installation and Long-Term Use

Standard mounting uses chain or cable suspension. Pendant and surface mounting options are also supported. The fixture does not include a cord, so field wiring is required at installation.

At 6.75 pounds, the fixture is manageable for single-person installation in most conditions. The die-cast aluminum housing supports long-term durability in industrial environments where fixtures are exposed to vibration, temperature cycling, and airborne particulates.

Wattage and color temperature adjustments are made at the fixture, allowing configuration to match the specific requirements of each mounting location without additional components.

How This Fixture Is Commonly Used

Facilities using this fixture typically set the wattage and color temperature during installation based on the task requirements and ceiling height in each zone. Once configured, the fixture operates at that output level unless manually changed. The adjustability allows maintenance teams to fine-tune light levels after installation if operational needs change.

The 0-10V dimming capability is commonly connected to occupancy-based control systems or tied into centralized building management platforms. In facilities without automated controls, the dimming input can be left unused and the fixture will operate at the selected wattage setting.

The frosted lens and 120-degree beam spread distribute light across wide floor areas, reducing harsh shadows between fixtures in open floor plans or storage environments.

Safety, Certifications, and Warranty

This fixture is UL listed and DLC Premium qualified. We provide a 5-year warranty covering manufacturing defects and component failure under normal operating conditions.

The 6kV surge protection rating allows the fixture to withstand electrical transients without damage. The operating temperature rating of -40°F to 113°F defines the environmental limits for safe continuous operation.

Frequently Asked Questions

What wattage options are available on this fixture?
The fixture is adjustable between 80W, 90W, and 105W, with corresponding lumen outputs of 12,000, 13,500, and 15,750 lumens.

What voltage does this fixture accept?
The fixture operates on 100V to 277V input at 50 or 60 Hz.

Is this fixture DLC listed?
Yes, this fixture is DLC Premium qualified.

What color temperatures are available?
The fixture is adjustable between 4000K and 5000K.

What mounting options are supported?
Chain-cable suspension is standard. Pendant and surface mounting are also supported.

What is the warranty coverage?
We provide a 5-year warranty on this fixture.

What metal halide fixtures does this replace?
Depending on the wattage setting used, this fixture replaces 150W, 250W, or 400W metal halide.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.