2 Fixture Wood Pole Bullhorn Wrap Mount | 2 3/8 Inch Tenon | Bronze

Product Overview

This two-fixture wood pole bullhorn wrap mount supports two pole-mounted fixtures on wood poles with a 2 3/8-inch tenon connection. It is built from galvanized steel with a bronze powder-coated finish.

The wrap mount fits wood poles with a 7 to 10 inch diameter. Its 200 pound weight capacity applies to the combined fixture load supported by the assembly.

Core Performance and Output

This is a structural mounting accessory, not a light-producing product. The two 2 3/8-inch tenons provide two fixture mounting positions from one wood pole location.

The assembly has a listed 200 pound weight capacity and weighs 26 pounds. Fixture weight, fixture EPA, pole condition, and wind loading must be evaluated together because the supplied data does not establish an EPA rating.

Adjustability and Control Options

This bullhorn provides two fixed tenon mounting positions. It does not include lighting controls, drivers, photocells, or dimming equipment.

Fixture aiming and control configuration depend on the fixtures installed on the tenons. The supplied data does not list adjustable arms or tenon angle adjustment.

Longevity and Reliability

Galvanized steel construction provides the base material for the wrap mount. The bronze powder-coated finish covers the steel assembly.

The listed warranty is one year. Long-term performance depends on maintaining the wood pole, mounting hardware, fixture load, and installed assembly.

Build Quality and Physical Characteristics

The bullhorn is constructed as a wrap mount for 7 to 10 inch diameter wood poles. It weighs 26 pounds before fixtures are installed.

Each mounting position uses a 2 3/8-inch tenon. Confirm the fixture mounting interface matches the tenon size before installation.

Where This Product Fits Best

This mount fits wood pole installations that require two fixture positions from one pole. It is suited to listed wood-pole lighting applications where fixture load remains within the 200 pound capacity.

• baseball field lighting
• softball field lighting
• parking lot lighting
• rural roadway lighting

Wood pole diameter, fixture weight, fixture EPA, and site wind exposure affect final mounting suitability. The supplied data lists no certification or EPA rating for this mount.

Installation and Long-Term Use

Install the wrap mount on a wood pole within the listed 7 to 10 inch diameter range. Verify the pole is in suitable condition before adding the 26 pound mount and attached fixture load.

The two fixture positions require compatible 2 3/8-inch tenon-mounted fixtures. The combined fixture weight must not exceed the listed 200 pound capacity.

How This Fixture Is Commonly Used

This mount is used where two fixtures are placed on a single wood pole for baseball field lighting, softball field lighting, parking lot lighting, or rural roadway lighting. Mounting height is determined by the existing pole and the project lighting layout.

The two tenon positions allow a two-fixture layout at one pole location. Fixture spacing and aiming vary with the selected fixtures, pole layout, and required light distribution, and the supplied data does not establish spacing values.

Safety, Certifications, and Warranty

No certifications are listed for this product. The listed warranty is one year.

Confirm pole diameter, fixture mounting interface, combined fixture weight, fixture EPA, and site loading requirements before installation. Do not exceed the listed 200 pound weight capacity.

Frequently Asked Questions

Q: What wood pole sizes does this bullhorn wrap mount fit?

A: It fits wood poles with a 7 to 10 inch diameter.

Q: What tenon size does this mount use?

A: The mount uses two 2 3/8-inch tenons.

Q: What is the weight capacity of the bullhorn?

A: The listed weight capacity is 200 pounds.

Q: Is an EPA rating listed for this mount?

A: No EPA rating is listed in the supplied product data.

Application Questions and Clarification

Q: Can this mount be used for parking lot lighting?

A: Parking lot lighting is a listed application. Final suitability depends on the wood pole diameter, fixture load, fixture EPA, and site loading requirements.

Q: What should be reviewed for baseball field lighting or softball field lighting?

A: Review the existing wood pole diameter, the two-fixture layout, combined fixture weight, fixture EPA, and site loading requirements. The supplied data does not establish fixture spacing or mounting height.

Q: Does this mount include lighting controls?

A: No lighting controls are listed in the supplied product data.

Web ID: 2181