1 Fixture Wood Pole Bullhorn Wrap Mount | 2 3/8 Inch Tenon | Bronze
Dwayne Kula | President, CTO and Founder
Out of stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Type | 1 Fixture Wood Pole Bull Horn |
| Color | Bronze Powder Coated Galvanized Steel |
| Tenon Size | 2 3/8 inch |
| Weight | 20 Lbs |
| Fits | 7-10 Inch Diameter Wood Poles |
| Weight Capacity | 200 pounds |
| Warranty | 1 year |
Notes:
- 1 Fixture - Wood Pole Bullhorn Mount.
- Made from galvanized steel.
- Mounts on 7-10 Inch Diameter Wood Poles.
Product Overview
This 1-fixture wood pole bullhorn wrap mount supports a single fixture on a 2 3/8-inch tenon. It mounts to wood poles with a 7 to 10-inch diameter and provides a bronze powder-coated galvanized steel finish.
The mount is rated for fixture loads up to 200 pounds. Its single-fixture configuration is intended for pole-mounted lighting layouts where one fixture is positioned from a wood pole.
Core Performance and Output
This is a structural mounting accessory and does not produce light output. Structural performance is defined by its 200-pound weight capacity, 2 3/8-inch tenon, and fitment range for 7 to 10-inch diameter wood poles.
The fixture weight must remain within the 200-pound capacity. Fixture EPA, wind load, pole condition, and site loading requirements must be evaluated separately because they are not established by the supplied product data.
Adjustability and Control Options
The mount provides one fixed fixture position through its single 2 3/8-inch tenon. It does not provide fixture aiming, dimming, photocell, or electrical control functions.
Fixture direction and control capability depend on the fixture installed on the tenon. The supplied data does not identify adjustment hardware or control components for this mount.
Longevity and Reliability
The mount is made from galvanized steel with a bronze powder-coated finish. The steel construction supports permanent attachment to compatible wood poles.
Long-term performance depends on maintaining the pole, mount attachment, and supported fixture within the stated load capacity. The product includes a 1-year warranty.
Build Quality and Physical Characteristics
This bullhorn wrap mount weighs 20 pounds. Its galvanized steel body is finished in bronze powder coating.
The mount fits wood poles measuring 7 to 10 inches in diameter. The 2 3/8-inch tenon accepts a single compatible tenon-mounted fixture.
Where This Product Fits Best
This mount fits wood-pole lighting installations requiring a single fixture position and a 2 3/8-inch tenon. Application fit depends on the installed fixture, pole condition, fixture weight, and site structural requirements.
- baseball field lighting
- softball field lighting
- soccer field lighting
- sports field lighting
- area lighting
- rural roadway lighting
- parking lot lighting
- municipal lighting
The galvanized steel construction and powder-coated bronze finish support exterior pole-mount configurations. The mount is limited to wood poles within the stated 7 to 10-inch diameter range.
Installation and Long-Term Use
Install the wrap mount on a wood pole measuring 7 to 10 inches in diameter. Confirm the fixture uses a 2 3/8-inch tenon mount and that the combined supported load does not exceed 200 pounds.
Inspect the pole condition and mount attachment during routine maintenance. The supplied data does not establish mounting hardware, wind loading, or fixture EPA limits.
How This Fixture Is Commonly Used
The mount places one fixture on a wood pole through the 2 3/8-inch tenon. Mounting height is determined by the pole and site lighting design; no mounting-height range is established by the supplied data.
For baseball field lighting, softball field lighting, soccer field lighting, and sports field lighting, fixture placement follows the field layout and pole locations. For area lighting, rural roadway lighting, parking lot lighting, and municipal lighting, fixture placement follows the site layout and required light distribution.
Using higher-output fixtures can reduce fixture count, but the final layout depends on fixture photometrics, aiming, pole locations, and target light levels. No spacing values or coverage areas are provided for this mount.
Safety, Certifications, and Warranty
The mount has a stated 200-pound weight capacity. Do not exceed this capacity with the installed fixture and supported components.
No certifications are listed in the supplied product specifications. The warranty period is 1 year.
Frequently Asked Questions
Q: What wood pole sizes fit this bullhorn wrap mount?
A: The mount fits wood poles with a 7 to 10-inch diameter.
Q: What tenon size does this mount provide?
A: The mount includes one 2 3/8-inch tenon.
Q: How much fixture weight can this mount support?
A: The stated weight capacity is 200 pounds.
Q: How many fixtures does this mount support?
A: This is a 1-fixture wood pole bullhorn mount.
Q: What should be checked when planning fixture placement?
A: Confirm the wood pole diameter, fixture tenon compatibility, fixture weight, and site layout. The supplied data does not provide fixture spacing, mounting-height, or coverage values.
Application Questions and Clarification
Q: Can this mount be used for baseball field lighting and softball field lighting?
A: Baseball field lighting and softball field lighting are valid applications for wood light and utility poles. Fixture compatibility, pole condition, fixture weight, and site structural requirements must be confirmed.
Q: Can this mount be used for rural roadway lighting or parking lot lighting?
A: Rural roadway lighting and parking lot lighting are valid applications for wood light and utility poles. The mount requires a 7 to 10-inch diameter wood pole and a fixture compatible with its 2 3/8-inch tenon.
Q: What should be reviewed before using this mount for municipal lighting?
A: Verify the pole diameter, fixture mounting interface, fixture weight, and required site loading conditions. The mount has a stated 200-pound weight capacity.
Web ID: 2180
