45 Watt Square Canopy Light | 6900 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Black Housing | Emergency Battery Backup
Dwayne Kula | President, CTO and Founder
Out of stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Watts | 45 |
| Lumens | 6900 |
| Lumens Per Watt | 153 |
| Replaces | 250 Watt Metal Halide |
| Voltage | 100V-277V |
| Color Temperature | 3000K or 4000K or 5000K |
| CRI | 70+ |
| Dimming | 1-10V |
| Beam Angles (Std) | 90° |
| Optics | Polycarbonate Lens |
| Lifespan | 150,000 (L70) hours |
| Mounting | Pendant or Surface |
| Fixture Color | Black |
| Frequency (Hz) | 50/60 |
| Power Factor | .90 |
| THD | 20% Max |
Durable Construction
| Housing | Die-Cast Aluminum |
| IP Rating | IP65 |
| Surge Protection | 6kV |
| Operating Temperature | -4°F to 122°F |
| Certifications | UL | Rebate Eligible |
| Warranty | 5 years |
Measurements
| Dimensions (in) | 10 L X 10 W X 3 H |
| Weight (lbs) | 6 |
Features/Accessories
- Color Adjustable
- Emergency Backup Battery
- Motion Sensor
Download IES Files
Product Lighting Layout Estimator
Use this estimator to calculate approximate fixture count, spacing, and average foot-candles for a simple rectangular space using the selected LED fixture. Enter your room dimensions, mounting height, target foot-candles, light loss factor, and room/layout condition to generate a preliminary lighting layout. When IES photometry is available, workplane height and room reflectance controls are shown.
Project Inputs
Estimated Results
Estimated average foot-candles are preliminary and should be verified with a lighting plan for project-critical applications.
Room / Layout Condition: This field is used only when usable IES photometry is not available. In fallback mode, it acts as a simplified room utilization factor for reflectance, fixture distribution, racking, obstructions, and how much fixture light reaches the work area. Open / light-colored spaces use 0.90, typical warehouses or shops use 0.75, racked or obstructed spaces use 0.60, and dark or complex spaces use 0.45. When IES photometry is active, this field is hidden and the estimator uses the selected workplane height, LLF, and simplified reflectance adjustment instead.
Photometry / Simulation Note: When usable IES photometry is available for the selected fixture, this estimator uses the fixture’s IES candela data, selected workplane height, light loss factor, and simplified reflectance adjustment to estimate fixture count, average foot-candles, and visual light distribution. The reflectance adjustment is a conservative approximation and is not a full zonal-cavity, radiosity, or professional photometric room calculation. When IES photometry is not available, the estimator uses a simulated beam model based on lumens, mounting height, room/layout condition, light loss factor, and beam angle.
Preliminary Estimate Only: This estimator is intended for simple square or rectangular spaces and should be used as a planning aid, not a final photometric lighting plan. Actual light levels may vary based on fixture optics, selected IES file, mounting conditions, workplane height, ceiling height, surface reflectance, obstructions, controls, voltage, installation conditions, and site-specific requirements. Project-critical applications should be verified with a formal lighting plan.
This estimate is a starting point. Warehouses, industrial facilities, hazardous locations, sports areas, schools, healthcare spaces, public areas, and code-sensitive projects may require a reviewed lighting layout before purchase or installation.
Product Overview
This 45-watt square LED canopy light produces 6,900 lumens with selectable 3000K, 4000K, or 5000K color temperature. It is built for pendant or surface mounting under canopy structures.
The fixture operates on 100-277V and replaces a 250-watt metal halide fixture. The included emergency battery backup supports continued operation during a power interruption.
Core Performance and Output
Output is 6,900 lumens at 153 lumens per watt. The standard 90-degree beam distribution provides focused downward illumination from a compact 10-inch square fixture.
The fixture uses 100-277V input power at 50/60Hz, with a 0.90 power factor and 20% maximum THD. At lower mounting heights, 6,900 lumens can create excessive brightness if fixture placement and target light levels are not considered.
Adjustability and Control Options
Color temperature is adjustable between 3000K, 4000K, and 5000K. This allows color selection to match the existing lighting condition or site requirements.
The driver supports 1-10V dimming. A motion sensor is listed as a fixture feature, and the fixture includes an emergency backup battery.
Longevity and Reliability
The LED system is rated for 150,000 hours L70 life. This rating supports long service intervals where access requires lift equipment or canopy shutdown coordination.
The fixture includes 6kV surge protection. It operates from -4 degrees F to 122 degrees F and carries a 5-year warranty.
Build Quality and Physical Characteristics
The housing is die-cast aluminum with a black finish. A polycarbonate lens protects the optical system.
The fixture measures 10 inches long by 10 inches wide by 3 inches high and weighs 6 pounds. It is IP65 rated for outdoor and covered-location exposure.
Where This Product Fits Best
This canopy light fits covered exterior locations that need compact, downward-directed lighting with pendant or surface mounting. Its 45-watt output suits canopy layouts where fixture locations are relatively close to the illuminated area.
- gas station lighting
- fueling area lighting
- parking canopy lighting
- drive-through canopy lighting
- covered walkway lighting
- entry canopy lighting
IP65 construction supports wet-location exposure. The selectable color temperature and black housing allow the fixture to align with different canopy finishes and lighting conditions.
Installation and Long-Term Use
The fixture mounts by pendant or surface installation. Confirm the mounting surface, wiring method, fixture orientation, and emergency backup access before installation.
Use the 100-277V input range to match the available branch voltage. Long-term maintenance should include inspection of the lens, housing, mounting connection, and emergency battery backup function.
How This Fixture Is Commonly Used
In gas station lighting, fueling area lighting, and parking canopy lighting, fixtures are arranged in a consistent grid aligned with canopy structural bays. Surface mounting keeps the fixture close to the canopy plane, while pendant mounting can position the fixture below structural obstructions.
For drive-through canopy lighting and covered walkway lighting, placement typically follows travel lanes, entrances, and covered circulation paths. Spacing varies with mounting height, selected color temperature, target light levels, and the required uniformity across the canopy area.
Safety, Certifications, and Warranty
This fixture is UL listed. It is rebate eligible.
The fixture is IP65 rated and includes 6kV surge protection. Warranty coverage is 5 years.
Frequently Asked Questions
Q: What is the lumen output of this canopy light?
A: The fixture produces 6,900 lumens at 45 watts.
Q: What color temperatures are available?
A: Color temperature is adjustable between 3000K, 4000K, and 5000K.
Q: What mounting methods are available?
A: The fixture supports pendant mounting and surface mounting.
Q: Does this fixture include emergency backup?
A: Yes. The fixture includes an emergency backup battery.
Q: Is this fixture suitable for parking canopy lighting?
A: Parking canopy lighting is a listed primary application for this canopy light.
Application Questions and Clarification
Q: What should be reviewed when selecting this fixture for fueling area lighting?
A: Review the available voltage, mounting method, mounting height, target light levels, layout requirements, and selected color temperature.
Q: How does the 90-degree beam angle affect canopy layout?
A: The 90-degree beam angle provides downward distribution. Fixture placement should account for mounting height and the required light distribution across the canopy area.
Q: Can the fixture be used for covered walkway lighting?
A: Covered walkway lighting is a listed secondary application. The IP65 rating supports wet-location exposure.
Web ID: 2153
