60 Foot Stadium Light Pole | 1 Cross Arm | 115 MPH Wind Rating

Product Overview

This 60-foot steel stadium light pole is built for large-scale outdoor lighting installations where fixture mounting height and structural stability are primary requirements. The pole is constructed from 8-gauge S235 steel with a hot dip galvanized finish and carries a wind load rating of 115 mph.

The pole ships with a single 10-foot cross arm for fixture mounting. Total pole weight is 1,973 pounds. Installation uses an anchor base system with eight anchor bolts measuring 43 inches in length and 1.18 inches in diameter.

Where This Product Fits Best

A 60-foot mounting height is appropriate for athletic fields, stadium venues, large parking areas, and outdoor recreation facilities where light must be projected over significant distances and coverage areas. The single cross arm configuration supports installations where fixtures are concentrated on one side of the pole or where a linear arrangement is preferred.

The 115 mph wind load rating makes this pole suitable for regions with moderate to high wind exposure. Facilities in coastal areas or locations subject to seasonal high winds should verify that local code requirements fall within this rating before specifying.

Performance and Functional Considerations

The 8-gauge S235 steel construction and 1,973-pound weight provide the structural mass necessary to support fixtures at 60 feet while resisting wind-induced movement. Hot dip galvanizing protects against corrosion in outdoor environments where the pole will be exposed to moisture, humidity, and temperature cycling over its service life.

The 10-foot cross arm length determines how fixtures can be spaced horizontally. This dimension affects aiming geometry and should be evaluated against the fixture layout required for the specific field or area being illuminated.

Installation and Long-Term Use

This pole uses an anchor base installation method. The foundation must accommodate eight anchor bolts at the specified 43-inch length and 1.18-inch diameter. Foundation design and engineering are site-specific and must account for local soil conditions, frost depth, and applicable building codes.

The hot dip galvanized finish is a passive protective layer that does not require routine recoating under normal outdoor exposure. Pole weight and height will require crane equipment for installation. Coordination with electrical contractors for conduit routing through the base and pole interior should occur during foundation planning.

How This Fixture Is Commonly Used

Poles at this height are typically installed at field perimeters where fixtures need to clear sightlines, seating, or structures while delivering light across large playing surfaces or parking areas. The single cross arm is oriented based on the direction fixtures need to aim, which is determined during the photometric layout phase of the project.

Once installed, the pole itself requires minimal interaction. Fixture access for maintenance, aiming adjustments, or lamp replacement will require lift equipment rated for the full 60-foot working height. Planning for periodic fixture access should factor into site layout decisions during project design.

Safety, Certifications, and Warranty

This pole is covered by a 1-year warranty.

The 115 mph wind load rating represents the maximum sustained wind speed the pole is engineered to withstand when properly installed with the specified anchor bolt configuration and an appropriately designed foundation.

Frequently Asked Questions

What is the wind load rating for this pole?
This pole is rated for 115 mph wind loads.

How many cross arms are included?
One cross arm is included, measuring 10 feet in length.

What type of installation does this pole require?
The pole uses an anchor base installation with eight anchor bolts. Bolts are 43 inches long and 1.18 inches in diameter.

What material is the pole made from?
The pole is constructed from 8-gauge S235 steel with a hot dip galvanized finish.

What warranty coverage is provided?
This pole includes a 1-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.