50 Watt Full Cutoff LED Wall Pack | 6400 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Built-In Photocell

Product Overview

This 50 watt full cutoff LED wall pack delivers 6400 lumens at 128 lumens per watt, replacing 150 watt metal halide fixtures. The full cutoff design directs all light output downward and outward, eliminating uplight and reducing glare on adjacent properties or into upper-floor windows.

Color temperature is field-adjustable between 3000K, 4000K, and 5000K, allowing selection at the time of installation based on site requirements. The fixture includes a built-in photocell for automatic dusk-to-dawn operation. A 120-degree beam angle provides broad coverage for wall-mounted exterior applications.

The housing is die-cast aluminum with a black finish. A polycarbonate lens protects the LED array. The fixture measures 9.2 x 7.7 x 4.7 inches and weighs 4.3 pounds.

Where This Product Fits Best

This wall pack is suited for exterior building perimeters, loading docks, service entrances, stairwells, and walkway lighting where a controlled light pattern is required. Full cutoff optics make it appropriate for sites subject to dark sky ordinances or where light trespass onto neighboring properties must be avoided.

The 100-277V input range supports installation across most commercial and industrial electrical systems. The operating temperature range of -40°F to 122°F allows use in cold storage entry areas, northern climates, and locations with high ambient summer temperatures.

At 6400 lumens, this fixture provides appropriate output for mounting heights and coverage areas typical of single-story commercial exteriors, rear service areas, and secondary access points.

Performance and Functional Considerations

The 50 watt draw produces 6400 lumens, a direct replacement for 150 watt metal halide in most exterior wall-mounted applications. CRI is rated at 70+, suitable for general security, egress, and area lighting where color accuracy is not critical.

The fixture supports 0-10V dimming, allowing integration with building management systems or compatible dimmers where reduced output is needed during occupied or unoccupied periods. Power factor exceeds 0.90 and total harmonic distortion is below 20%, supporting stable operation on commercial electrical systems.

Rated lifespan is 50,000 hours at L70, meaning the fixture retains at least 70% of initial lumen output at that point.

Installation and Long-Term Use

The fixture mounts directly to exterior walls using standard hardware patterns. Die-cast aluminum construction resists corrosion in outdoor environments. The IP65 rating allows exposure to rain, snow, and hose-directed water without moisture ingress.

Color temperature selection is made during installation using the onboard switch, allowing a single fixture to serve sites requiring warmer or cooler light output. Once installed, the built-in photocell enables automatic operation without external timers or control wiring.

At 4.3 pounds, the fixture is light enough for straightforward single-person installation on standard masonry or framed walls.

How This Fixture Is Commonly Used

After installation, the primary interaction with this fixture is minimal. The photocell handles on/off switching automatically based on ambient light levels, so no manual switching is required for daily operation.

If connected to a 0-10V dimming circuit, output can be reduced from a central controller or wall station. This is sometimes used to lower light levels during unoccupied overnight hours or to comply with site-specific lighting schedules.

The field-selectable color temperature is set once during installation and does not require adjustment afterward. Maintenance personnel should note the selected setting if fixtures are replaced or added to ensure visual consistency across the building exterior.

Safety, Certifications, and Warranty

This fixture is UL listed and rebate eligible. The IP65 rating allows installation in exposed outdoor locations where rain and dust are present.

We include a 5-year warranty on this product.

Frequently Asked Questions

What voltage does this wall pack accept?
The fixture operates on 100-277V input at 50-60Hz, covering standard commercial voltage ranges.

Can I select the color temperature after installation?
Color temperature is selected during installation using an onboard switch. The options are 3000K, 4000K, and 5000K.

Is this fixture dimmable?
Yes. The fixture supports 0-10V dimming when connected to a compatible dimmer or control system.

Is this wall pack eligible for utility rebates?
The fixture is listed as rebate eligible. Actual rebate availability depends on your local utility program requirements.

What is the warranty period?
This product carries a 5-year warranty.

Can this be used in cold climates?
Yes. The operating temperature range is -40°F to 122°F.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.