4 Fixture 180 Degree Bullhorn Mount | 2 3/8 Inch Tenon | Bronze | Low Profile
Dwayne Kula | President, CTO and Founder
101 in stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Type | 4 fixture bull horn 180 degrees |
| Color | Bronze |
| Tenon Size | 2 3/8 inch |
| EPA | 2.2 |
| Weight | 41 lbs |
| Warranty | 1 year |
Product Overview
This 4-fixture 180 degree bullhorn mount supports four fixtures on a 2 3/8 inch tenon. The bronze, low-profile assembly positions fixtures across a 180 degree pattern.
It is used as a pole-top mounting component for parking lot lighting and roadway lighting layouts that require multiple fixture heads from one pole location. The assembly weighs 41 lbs and has an EPA rating of 2.2.
Core Performance and Output
This bullhorn mount has no light output or electrical operating characteristics. Its structural performance is defined by the 2.2 EPA rating, four-fixture capacity, and 2 3/8 inch tenon fitment.
Fixture weight, fixture EPA, and pole loading must remain within the complete pole assembly design. A four-fixture configuration increases the loading applied at the pole top compared with a single-fixture installation.
Adjustability and Control Options
The mount provides a fixed 180 degree fixture arrangement. No aiming adjustment, dimming function, or electrical control component is included with this mounting assembly.
Fixture direction is established by the bullhorn arm layout and the orientation of the mount on the tenon. Final fixture aiming depends on the fixture hardware and project layout.
Longevity and Reliability
The bronze finish provides the specified exterior appearance for the mounting assembly. The mount is a mechanical pole-top component with no driver, LED board, or electrical control parts.
Long-term service should include inspection of the tenon connection, fixture mounting points, and installed fixture loading. The supplied warranty period is 1 year.
Build Quality and Physical Characteristics
This is a four-fixture bullhorn mount with a 180 degree arm configuration. It mounts to a 2 3/8 inch tenon and weighs 41 lbs.
The low-profile bronze form keeps the fixture support assembly concentrated at the pole top. The mount must be matched to the pole tenon size before installation.
Where This Product Fits Best
This mount fits pole-mounted lighting layouts that need four fixture positions across a 180 degree coverage pattern. It is suited to projects using pole assemblies designed for the stated EPA loading.
- parking lot lighting
- roadway lighting
- area lighting
- commercial site lighting
- campus lighting
- industrial yard lighting
Application fit depends on the pole, tenon size, fixture EPA, fixture weight, and total loading of the completed assembly. The 2 3/8 inch tenon requirement is fixed.
Installation and Long-Term Use
Installation requires placing the bullhorn mount over a 2 3/8 inch pole tenon and securing the assembly before fixtures are installed. The 41 lb mount weight should be considered during pole-top handling and installation planning.
Verify the mount orientation before final tightening so the four fixture positions follow the intended 180 degree layout. Periodic inspection should confirm that the tenon connection and fixture mounting points remain secure.
How This Fixture Is Commonly Used
For parking lot lighting, roadway lighting, and area lighting, the mount places four fixtures at one pole location with heads distributed across a half-circle pattern. Pole mounting height and fixture selection affect the resulting lighting layout.
Commercial site lighting, campus lighting, and industrial yard lighting layouts use the 180 degree configuration where coverage is needed in a defined direction from the pole. Higher-output fixtures can reduce fixture locations, but fixture EPA and pole loading must still be reviewed.
Safety, Certifications, and Warranty
The supplied product data lists an EPA rating of 2.2. No certification listings are provided in the supplied product data.
This bullhorn mount includes a 1-year warranty. Installation must account for the mount weight, four-fixture configuration, pole tenon size, and completed assembly loading.
Frequently Asked Questions
Q: How many fixtures does this bullhorn mount support?
A: This mount supports four fixtures.
Q: What tenon size does this mount require?
A: This bullhorn mount mounts on a 2 3/8 inch tenon.
Q: What is the EPA rating of this mount?
A: The EPA rating is 2.2.
Q: What fixture layout does the mount provide?
A: The mount provides a four-fixture layout across 180 degrees.
Q: What should be reviewed when planning a four-fixture pole layout?
A: Review the 2.2 EPA rating, 2 3/8 inch tenon requirement, fixture weight, fixture EPA, and total pole assembly loading. Specific spacing and coverage values are not provided in the supplied product data.
Application Questions and Clarification
Q: Can this mount be used for parking lot lighting?
A: Parking lot lighting is a listed application. Final fit depends on the pole tenon size and completed fixture and pole loading.
Q: Can this mount be used for roadway lighting?
A: Roadway lighting is a listed application. The mount provides four fixture positions across a 180 degree configuration.
Q: What should be confirmed before using this mount for industrial yard lighting?
A: Confirm the 2 3/8 inch tenon size, fixture weight, fixture EPA, and total loading of the completed pole assembly.
Web ID: 2075