2 Fixture 180 Degree Bullhorn Mount | 2 3/8 Inch Tenon | Bronze

Product Overview

This 2-fixture 180-degree bullhorn mount positions two fixtures in opposite directions from a 2 3/8 inch tenon. It is intended for pole-mounted lighting layouts requiring coverage on both sides of the pole.

The bronze-finished bracket is commonly paired with pole-mounted fixtures for parking lot lighting and area lighting. Its 180-degree orientation supports linear or opposing coverage patterns rather than a multi-directional site layout.

Core Performance and Output

This bracket supports two fixture positions at 180 degrees and has a 0.9 EPA rating. Structural evaluation must account for the combined EPA of the mounted fixtures and the pole system.

The 2 3/8 inch tenon connection defines the mounting interface. Fixture size, weight, and wind exposure must remain within the limitations of the complete pole, tenon, and bracket assembly.

Adjustability and Control Options

The fixture positions are fixed at 180 degrees. The bracket does not provide adjustable aiming positions.

Control capability is determined by the fixtures installed on the bullhorn mount. No controls are included with the bracket.

Longevity and Reliability

The bracket has a bronze finish and a listed weight of 24 lbs. The fixed two-fixture configuration avoids moving adjustment components.

A 1-year warranty is included. Periodic inspection should confirm that the tenon connection and fixture mounting points remain secure.

Build Quality and Physical Characteristics

This is a two-fixture bullhorn bracket with a 2 3/8 inch tenon size. The opposing arms establish a fixed 180-degree fixture arrangement.

The bracket weighs 24 lbs and has a bronze finish. Pole and tenon selection must account for the bracket weight along with the installed fixture loads.

Where This Product Fits Best

This bullhorn mount fits pole-mounted layouts where two fixtures need to face opposite directions from one pole. It is suited to projects using a 2 3/8 inch tenon connection and a 0.9 EPA bracket rating.

• parking lot lighting
• area lighting
• commercial site lighting
• roadway lighting
• campus lighting
• industrial yard lighting

The 180-degree arrangement works where light distribution follows two opposing directions. It does not provide the multi-directional coverage of a four-fixture bullhorn configuration.

Installation and Long-Term Use

The bracket mounts to a 2 3/8 inch tenon and requires two compatible fixture mounting locations. Installers should verify the pole, tenon, bracket, and fixture assembly as one structural system before final installation.

Mounting hardware and fixture connections should be checked during routine pole maintenance. The 24 lb bracket weight must be included when handling and supporting the assembly during installation.

How This Fixture Is Commonly Used

For parking lot lighting and roadway lighting, the two fixtures are oriented in opposite directions to follow the path or coverage line served by the pole. Mounting height is determined by the pole and fixture layout, not by the bullhorn bracket alone.

In area lighting, commercial site lighting, campus lighting, and industrial yard lighting, pole placement and fixture optics determine the final coverage pattern. Wider spacing may reduce fixture count, but uniformity depends on the fixture distribution and layout.

Safety, Certifications, and Warranty

No certifications are stated in the supplied product data.

This bullhorn mount includes a 1-year warranty. The assembly has a listed EPA rating of 0.9.

Frequently Asked Questions

Q: How many fixtures does this bullhorn mount support?

A: This bracket supports two fixtures.

Q: What direction are the fixture positions arranged?

A: The two fixture positions are arranged at 180 degrees.

Q: What tenon size does this bracket use?

A: This bullhorn mount uses a 2 3/8 inch tenon size.

Q: What EPA rating applies to this bracket?

A: The listed EPA rating is 0.9.

Q: What should be considered when planning a two-fixture pole layout?

A: The fixed 180-degree fixture arrangement, 0.9 EPA rating, 2 3/8 inch tenon size, and the complete pole and fixture assembly must be considered.

Application Questions and Clarification

Q: Is this bracket appropriate for parking lot lighting with opposing fixture directions?

A: Yes. The bracket provides two fixture positions at 180 degrees for opposing directions from one pole.

Q: What should be reviewed for commercial site lighting installations?

A: Confirm the pole uses a 2 3/8 inch tenon and evaluate the complete assembly against the bracket’s listed 0.9 EPA rating.

Q: Does this bracket provide adjustable fixture aiming for industrial yard lighting?

A: No. The fixture positions are fixed at 180 degrees.

Web ID: 2072