30 Foot Round Steel Light Pole | 5 Inch Diameter | Anchor Base

Product Overview

This 30-foot round steel light pole provides a mounting structure for area lighting installations requiring elevated fixture placement. The pole measures 5 inches in diameter with 11-gauge steel wall thickness and weighs 242 pounds. It ships with a top cap included.

The finish consists of hot dip galvanizing followed by bronze powder coating. This dual-layer finish approach addresses both corrosion protection and appearance requirements for permanent outdoor installations.

The anchor base mount design requires a concrete foundation with embedded anchor bolts. The bolt circle accepts configurations from 8 to 10 inches in diameter, with a bolt projection of 3.15 inches above the foundation surface.

Where This Product Fits Best

A 30-foot pole height suits parking lots, commercial driveways, loading areas, and property perimeter lighting where fixture elevation must clear obstructions or achieve broad coverage. At this height, the pole supports fixture placements typical of retail, industrial, and institutional site lighting projects.

The 5-inch diameter and 11-gauge steel construction determines the wind load capacity and fixture weight the pole can support. Pole selection depends on matching the pole''s EPA ratings to the combined effective projected area of the fixtures and arms planned for installation, adjusted for local wind speed requirements.

Performance and Functional Considerations

EPA ratings define how much wind-loaded fixture area the pole can support at various wind speeds. This pole is rated for 9.2 square feet of EPA at 70 mph, decreasing to 3.2 square feet at 120 mph. The appropriate EPA value depends on the design wind speed for your location, which is typically determined by local building codes or engineering requirements.

The hot dip galvanized base layer provides steel corrosion protection, while the bronze powder coat finish adds UV resistance and color consistency. Both layers must remain intact for long-term durability.

Installation and Long-Term Use

Anchor base installation requires a poured concrete foundation with J-bolts or anchor bolts embedded to the correct bolt circle diameter and projection height. The 8 to 10-inch bolt circle range allows compatibility with multiple foundation designs. Bolt projection must match the 3.15-inch specification to ensure proper base cover engagement and leveling nut clearance.

At 242 pounds, this pole requires mechanical lifting equipment for safe installation. Rigging, lifting points, and lowering procedures should follow standard steel pole installation practices. Wiring access is through the handhole and internal conduit path to the fixture arm or tenon at the top.

Periodic inspection of the base cover, anchor hardware, and pole finish is typical for steel poles in outdoor service. Any finish damage should be addressed to prevent localized corrosion.

How This Fixture Is Commonly Used

Once installed, the pole serves as a permanent fixture mounting point requiring minimal interaction. Day-to-day operation involves the fixtures mounted to it, not the pole itself. Access for fixture maintenance or relamping typically requires a bucket truck or similar equipment due to the 30-foot height.

If fixtures or arms are changed in the future, the replacement configuration must remain within the original EPA limits for your design wind speed. Adding fixtures or larger arms without verifying EPA compatibility can exceed the pole''s structural capacity.

Safety, Certifications, and Warranty

This pole carries a 1-year warranty.

The EPA ratings provided are based on standardized wind load calculations. Site-specific engineering review may be required depending on local permit requirements, soil conditions, or exposure classification.

Frequently Asked Questions

What bolt circle size does this pole require?
The anchor base accepts bolt circles from 8 to 10 inches in diameter.

What is the required bolt projection?
Anchor bolts must project 3.15 inches above the top of the concrete foundation.

What is the EPA rating for this pole?
EPA capacity varies by wind speed: 9.2 square feet at 70 mph, 7.4 at 80 mph, 6.1 at 90 mph, 5.8 at 100 mph, 4.8 at 110 mph, and 3.2 at 120 mph.

What finish is applied to this pole?
The pole is hot dip galvanized and finished with bronze powder coating.

What is the warranty coverage?
This pole includes a 1-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.