80 / 100 / 120 Watt LED Decorative Post Top Light | 9600 to 14400 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This LED decorative post top light delivers field-adjustable output at 80, 100, or 120 watts with corresponding lumen outputs of 9600, 12000, or 14400 lumens. Color temperature is also adjustable between 3000K, 4000K, and 5000K. The fixture operates on 100-277V input and replaces 400-watt metal halide post tops.

The housing is die-cast aluminum with a black finish. Optics consist of frosted tempered glass with a Type 5 distribution pattern and 360-degree beam angle. The included slip fitter bracket accepts 3-inch poles. Overall dimensions measure 11.9 inches by 11.9 inches by 26 inches tall.

Rated lifespan is 50,000 hours at L70. The fixture supports 1-10V dimming, operates at 50-60Hz frequency, and maintains a power factor greater than 0.90 with THD under 20 percent. CRI is 70 or higher across all color temperature settings.

Where This Product Fits Best

This post top is sized and rated for exterior applications on 3-inch poles where decorative appearance matters. Typical locations include parking lots, pathways, campus settings, municipal streetscapes, and property perimeters where traditional post top aesthetics are required.

The IP65 rating allows installation in locations exposed to rain, snow, and hose-directed water. EPA rating of 1.2 should be factored into pole and foundation wind load calculations. The black finish suits applications where visual consistency with existing site infrastructure is necessary.

Output and color adjustability allow the same fixture to serve varied site requirements, from pedestrian-scale pathways needing warmer color temperatures and lower output to parking areas requiring cooler temperatures and higher lumens.

Performance and Functional Considerations

At 120 lumens per watt across all wattage settings, efficiency remains consistent regardless of selected output. The 400-watt metal halide replacement rating applies at the 120-watt setting. Lower wattage settings suit locations where 400-watt replacement output would be excessive.

Type 5 distribution provides a circular, symmetrical light pattern centered below the fixture. The 360-degree beam angle combined with frosted tempered glass creates broad, even illumination without harsh directional shadows. This distribution works well for freestanding poles where light needs to spread in all directions.

The 100-277V input range covers standard commercial voltages without requiring external transformers or voltage-specific models. Dimming via 1-10V protocol allows integration with compatible controls where output reduction beyond the wattage adjustment is needed.

Installation and Long-Term Use

The slip fitter bracket mounts directly to 3-inch round poles. Die-cast aluminum construction provides corrosion resistance and structural rigidity. At 26 inches tall, the fixture has significant vertical presence that should be accounted for in total pole height calculations.

Wattage and color temperature adjustments are made at the fixture. Once set, output and color remain fixed unless manually changed during future maintenance access. The frosted tempered glass lens protects internal components while diffusing light output.

With a 50,000-hour L70 lifespan, the fixture maintains at least 70 percent of initial lumens through that period. For installations operating 12 hours per night, this translates to over 11 years before lumen depreciation reaches that threshold.

How This Fixture Is Commonly Used

Facilities typically set wattage and color temperature during initial installation based on site conditions. A parking lot perimeter might use 120 watts at 5000K for maximum output and visibility, while a pedestrian pathway through landscaped areas might use 80 watts at 3000K for softer, warmer illumination.

The adjustment capability allows maintenance crews to modify output if site conditions change, such as adding or removing fixtures, or if tenant preferences shift toward different color temperatures. Changes require physical access to the fixture but no rewiring or component replacement.

On sites with mixed lighting needs, the same fixture model can be deployed throughout with settings varied by zone. This simplifies lamp and driver compatibility for future maintenance since all fixtures share identical components regardless of their configured output.

Safety, Certifications, and Warranty

This fixture is ETL listed and rebate eligible. IP65 rating means the fixture is protected against dust ingress and water projected from nozzles in any direction.

We provide a 5-year warranty on this product.

Frequently Asked Questions

What voltages does this fixture accept?
The fixture operates on 100-277V input at 50-60Hz.

What pole size does this fixture fit?
The included slip fitter bracket accepts 3-inch round poles.

Is this fixture eligible for utility rebates?
Yes, this fixture is rebate eligible.

What does this fixture replace?
At 120 watts, this fixture replaces 400-watt metal halide post tops.

What is the warranty period?
This fixture carries a 5-year warranty.

Can this fixture be dimmed?
Yes, the fixture supports 1-10V dimming.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.