60 Foot Stadium Light Pole | 2 Cross Arms | 115 MPH Wind Rating
Dwayne Kula | President, CTO and Founder
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Total Height (ft) | 60 |
| Material | Steel |
| Pole Weight (lbs) | 2070 |
| Pole Diameter Top (in) | 7.87 |
| Pole Diameter Base (in) | 22.63 |
| Pole Finish | Hot Dip Galvanized |
| Pole Color | Bronze | Black | White | Gray | Custom |
| Pole Gauge | 8 Gauge S235 Steel |
| Install Kit | Included |
| Pole Installation | Anchor Base |
| Includes | Top Cap | Two 10 Foot Cross Arms |
| Warranty | 1 year |
| Installation Kit | Included |
Disclaimer: LED Lighting Supply is not responsible for improper loading (ie what is mounted to the pole), use, or foundation design of light poles. Dimensions and specifications of poles are subject to change without notice.
Please be advised that our steel poles are covered solely by a 1-year workmanship warranty, which ensures that the poles are free from defects from the manufacturing process, such as welds and structural integrity, for a period of one year from the date of purchase. This warranty does not cover damage resulting from external factors, misuse, or normal wear and tear.
Additional Resources
This pole represents a typical configuration that we manufacture along with some of the general specifications. Our stadium poles are built to order as structural requirements and environmental factors are project-specific. We have the ability to powder coat various colors in addition to galvanization. Talk to one of our lighting specialists today to begin the design process for your project.
Product Overview
This 60-foot steel stadium light pole is an anchor-base structural support for elevated outdoor lighting assemblies. It includes two 10-foot cross arms and a top cap.
The pole is built from 8-gauge S235 steel with a hot-dip galvanized finish. Its 115 MPH wind rating and 60-foot height suit large outdoor lighting layouts where fixtures need to be positioned above the active area.
LED Lighting Supply builds these stadium poles to order because structural requirements and environmental factors vary by project.
Core Performance and Output
The pole provides a 60-foot mounting elevation with two 10-foot cross arms for fixture positioning. The 115 MPH wind rating is part of the structural configuration identified for this pole.
The steel shaft measures 22.63 inches at the base and tapers to 7.87 inches at the top. Pole weight is 2,070 pounds.
Fixture weight, fixture EPA, cross-arm loading, and site wind conditions must remain within the final structural design. The supplied data does not establish fixture capacity limits for the cross arms.
Adjustability and Control Options
This pole includes two fixed 10-foot cross arms. The supplied configuration does not identify adjustable cross-arm positions or field-adjustable structural components.
Lighting controls are not included in the supplied product data. Control equipment must be selected separately based on the lighting system design.
Longevity and Reliability
The hot-dip galvanized steel finish provides the specified exterior finish for the pole. Powder coating is available in bronze, black, white, gray, or custom colors in addition to galvanization.
Long-term pole performance depends on the project-specific structural design, environmental conditions, anchor-base installation, and attached fixture loading.
The pole includes a 1-year warranty.
Build Quality and Physical Characteristics
This is an 8-gauge S235 steel pole with an anchor-base installation method. The tapered shaft has a 22.63-inch base diameter and a 7.87-inch top diameter.
The assembly includes a top cap, two 10-foot cross arms, and an installation kit. The pole weighs 2,070 pounds.
Its physical size and weight require site access and lifting planning before installation. Final foundation and anchor requirements are project-specific.
Where This Product Fits Best
This pole fits large outdoor lighting installations that require elevated fixture mounting and cross-arm support. The 60-foot height is suited to broad-area layouts rather than low-height site lighting.
- sports facility lighting
- area lighting
- commercial site lighting
- industrial yard lighting
- parking lot lighting
- roadway lighting
The galvanized steel construction is intended for exterior structural use. Final pole configuration must account for local wind conditions, fixture loading, and site-specific structural requirements.
Installation and Long-Term Use
The pole installs through an anchor-base connection and includes an installation kit. Foundation design, anchor requirements, lifting equipment, and installation sequencing must be determined for the project.
At 60 feet, fixture aiming and cross-arm orientation should be established before final commissioning. Access planning is important for fixture service after the pole is installed.
Cross-arm loading and fixture selection affect the final structural configuration. The supplied data does not provide a fixture weight or EPA limit.
How This Fixture Is Commonly Used
This pole is used where lighting fixtures need to be elevated above sports facility lighting, area lighting, commercial site lighting, industrial yard lighting, parking lot lighting, or roadway lighting. The two cross arms provide a fixed arrangement for mounting fixture assemblies.
Layout planning typically considers pole location, lighting direction, fixture aiming, and the areas requiring illumination. Pole spacing and fixture count vary with the selected fixtures, target light levels, and site layout.
Higher mounting elevation can reduce the number of pole locations required, but fixture aiming and distribution must be coordinated to maintain the intended coverage pattern.
Safety, Certifications, and Warranty
No certifications are listed for this pole.
The pole uses an anchor-base installation and includes an installation kit. Structural requirements and environmental factors are project-specific.
The warranty period is 1 year.
Frequently Asked Questions
Q: What is the total height of this stadium light pole?
A: The total pole height is 60 feet.
Q: What is included with the pole?
A: The pole includes a top cap, two 10-foot cross arms, and an installation kit.
Q: How is this pole installed?
A: This pole uses an anchor-base installation method.
Q: What wind rating is identified for this pole?
A: The identified wind rating is 115 MPH.
Q: What should be reviewed when planning pole placement?
A: Pole location, fixture loading, site wind conditions, lighting layout, foundation design, and anchor requirements should be reviewed. The supplied product data does not establish spacing or fixture quantity.
Application Questions and Clarification
Q: Is this pole appropriate for sports facility lighting?
A: Sports facility lighting is a listed application. Final structural configuration depends on project-specific requirements and environmental factors.
Q: Can this pole be used for parking lot lighting or roadway lighting?
A: Parking lot lighting and roadway lighting are listed applications. Pole location, fixture loading, wind conditions, and lighting layout must be evaluated for the installation.
Q: What finish options are available?
A: The pole has a hot-dip galvanized finish. Bronze, black, white, gray, and custom powder-coated colors are available in addition to galvanization.
Q: What information is needed to finalize the pole configuration?
A: Structural requirements, environmental factors, fixture loading, and site-specific installation conditions need to be determined for the project.
Web ID: 2051
