60 Watt 4 Foot Low Profile Explosion Proof Linear LED Light | 8400 Lumens | Class 1 Div 2 | Class 2 Div 2 | 5000K | 100-277V

Product Overview

This 60 Watt 4 Foot Low Profile Explosion Proof Linear LED Light is a Class 1 Division 2 and Class 2 Division 2 rated fixture built for hazardous location installations. The fixture produces 8,400 lumens at 5000K color temperature, delivering 140 lumens per watt from a compact linear form factor that replaces 250 watt metal halide systems.

Construction consists of copper-free die-cast aluminum housing with a clear polycarbonate lens diffuser. The fixture measures 50 x 4.5 x 6.3 inches and weighs 30 pounds. It operates on 100-277V input at 50-60Hz with a power factor greater than .95 and THD under 10%.

The fixture supports 1-10V dimming and offers a 120-degree beam angle. Rated lifespan is 50,000 hours at L70. The housing finish is gray.

Where This Product Fits Best

This fixture is classified for Class 1 Division 2 locations with Group B, C, and D atmospheres, Class 2 Division 2 locations with Group F and G atmospheres, and Class 3 locations. These classifications cover areas where ignitable concentrations of flammable gases, vapors, combustible dusts, or fibers may be present under abnormal conditions.

The IP66 rating means the fixture is sealed against dust ingress and protected against high-pressure water jets from any direction. Combined with wet location listing per UL 1598 and UL 1598A, this fixture is suited for washdown environments and areas exposed to moisture, humidity, or direct water contact.

Operating temperature range spans -22°F to 122°F, supporting both cold storage adjacencies and elevated ambient conditions found in processing areas. The NSF rating makes this fixture appropriate for food and beverage processing environments where sanitation and cleanability are required.

Performance and Functional Considerations

At 8,400 lumens and 140 lumens per watt, this fixture provides the output equivalent of a 250 watt metal halide while drawing 60 watts. The 5000K color temperature produces a neutral white light commonly used in industrial and processing environments where visual clarity and color distinction support task performance.

CRI is rated at 70+, which is typical for industrial applications where accurate color rendering is useful but not critical. The 120-degree beam angle distributes light broadly, which works well for general area illumination in spaces with moderate ceiling heights.

The 1-10V dimming capability allows output to be reduced when full light levels are not required. This requires a compatible 1-10V dimming circuit at the point of installation.

Installation and Long-Term Use

Mounting options include bracket, surface, and wall configurations. At 30 pounds, the fixture requires secure anchoring to structural members or rated mounting surfaces capable of supporting that load in the intended orientation.

The copper-free aluminum housing resists corrosion in chemical environments where standard aluminum may degrade. The polycarbonate lens diffuser is dustproof and sealed within the IP66-rated enclosure, which reduces maintenance frequency in dirty or dusty atmospheres.

With a 50,000-hour L70 rated lifespan, the fixture is designed for extended service intervals. In facilities running continuous operations, this translates to years of use before lumen depreciation reaches 70% of initial output.

How This Fixture Is Commonly Used

Facilities use this fixture to replace aging fluorescent or metal halide systems in hazardous locations where classified atmospheres are present. The low-profile linear form factor fits into spaces where traditional explosion proof fixtures with larger housings would be difficult to position or would obstruct other equipment.

The 1-10V dimming input allows operators to tie the fixture into building management systems or manual dimming controls when reduced output is acceptable during low-activity periods. In washdown areas, the IP66 seal and wet location rating allow the fixture to remain in place during cleaning without requiring protective covers or temporary removal.

Because the fixture is NSF rated, it is installed in food processing, pharmaceutical, and other facilities where regulatory inspections require lighting equipment to meet sanitation standards.

Safety, Certifications, and Warranty

This fixture is UL844 listed for hazardous locations and carries CSA, ATEX, and IECEx certifications. It is wet location listed per UL 1598 and UL 1598A. The fixture is NSF rated and rebate eligible.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture accept?
The fixture operates on 100-277V input at 50-60Hz.

What hazardous location classifications does this fixture carry?
Class 1 Division 2 Groups B, C, and D; Class 2 Division 2 Groups F and G; and Class 3.

Is this fixture rebate eligible?
Yes, this fixture is rebate eligible.

What is the IP rating?
IP66. The fixture is sealed against dust and protected from high-pressure water jets.

Does this fixture dim?
Yes, it supports 1-10V dimming.

What is the warranty?
5 years.

What does this fixture replace?
It replaces 250 watt metal halide fixtures.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.