60 / 80 / 100 Watt Adjustable LED Post Top Light | 7800 to 13000 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This adjustable LED post top fixture delivers 7,800 to 13,000 lumens across three selectable wattage settings: 60, 80, or 100 watts. Color temperature is also field-adjustable, with options for 3000K, 4000K, or 5000K output. The fixture operates on 100-277V input and maintains 130 lumens per watt across all wattage settings.

The housing is die-cast aluminum with a bronze finish. A polycarbonate lens covers the optics, and the fixture produces a Type 5 distribution pattern with 360-degree coverage. It mounts using an included slip fitter bracket sized for 3-inch poles.

At the 60W setting, this fixture replaces 150W metal halide. At 80W, it replaces 250W metal halide. At 100W, it serves as a replacement for 400W metal halide lamps.

Where This Product Fits Best

This post top fixture is designed for outdoor pole-mounted applications where broad, symmetrical light distribution is needed. The Type 5 optics spread light evenly in all directions, which suits pathway lighting, parking areas, campus walkways, and similar open environments where fixtures are positioned centrally within the area being illuminated.

The operating temperature range of -40°F to 113°F allows installation in climates with cold winters or hot summers. IP65 rating means the fixture can handle direct water spray and dust exposure, so it holds up in rain, snow, and washdown conditions without issue.

With an EPA rating of 0.37, wind load calculations for pole sizing are straightforward. The 15.43 lb weight and 16.5-inch diameter by 17-inch height should be confirmed against existing pole capacity when replacing older fixtures.

Performance and Functional Considerations

Lumen output scales directly with wattage selection: 7,800 lumens at 60W, 10,400 lumens at 80W, and 13,000 lumens at 100W. The 130 lumens per watt efficacy remains constant regardless of which setting is used. CRI is rated at 75+, which is typical for area and pathway lighting where color accuracy is not the primary concern.

This fixture does not dim. If dimming capability is required for the project, this is not the right fixture. Power factor exceeds 0.92 and THD is under 20%, which keeps it compatible with standard commercial electrical systems without introducing harmonics issues.

The 50,000-hour L70 lifespan means the fixture will maintain at least 70% of initial output through that operational period. For facilities running fixtures overnight or continuously, that translates to years of use before output degrades noticeably.

Installation and Long-Term Use

The included slip fitter bracket accepts 3-inch poles. Confirm pole diameter before installation?this bracket is not adjustable for smaller or larger pole sizes. Wattage and color temperature selections are made at the fixture, so settings should be finalized during installation based on site requirements.

Once mounted, the die-cast aluminum housing and polycarbonate lens require no routine maintenance beyond periodic cleaning. The IP65 rating means internals are sealed against dust and water ingress, so lens replacement due to moisture intrusion is not expected under normal conditions.

Operating temperature tolerance from -40°F to 113°F covers most North American climates without requiring supplemental heating or cooling. Electrical input accepts 100-277V at 50-60Hz, so it connects directly to most commercial service without transformers.

How This Fixture Is Commonly Used

Facilities typically set wattage based on the light level needed for the specific area. Lower-traffic pathways or decorative applications often use the 60W setting, while larger open areas or security-focused locations may run at 80W or 100W. The ability to adjust output at the fixture means the same hardware works across different zones without changing models.

Color temperature selection depends on the visual environment. Warmer 3000K output blends well with architectural or hospitality settings. Cooler 4000K or 5000K output improves visibility and perceived brightness for parking lots, loading areas, and security lighting. These settings are selected during installation and remain fixed during operation.

Safety, Certifications, and Warranty

This fixture is UL listed and rebate eligible. The IP65 rating confirms the enclosure resists dust ingress and water jets from any direction. Operating temperature range is rated from -40°F to 113°F.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What wattage options are available?
The fixture is adjustable between 60W, 80W, and 100W. Selection is made at the fixture.

What color temperatures can I choose from?
3000K, 4000K, or 5000K. The setting is selected at the fixture during installation.

What voltage does this fixture require?
It operates on 100-277V input at 50-60Hz.

Is this fixture dimmable?
No. This fixture does not support dimming.

What pole size does the mounting bracket fit?
The included slip fitter bracket fits 3-inch diameter poles.

Is this fixture eligible for utility rebates?
Yes. The fixture is listed as rebate eligible.

What is the warranty coverage?
This fixture includes a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.