25 Foot Square Steel Light Pole | 4 Inches Wide | Anchor Base
Cory Peterson | VP of Marketing and Sales Operations
Out of stock
Product Specifications
Key Features
| Brand | LED Lighting Supply |
| Total Height (ft) | 25 |
| Material | Steel |
| Pole Weight (lbs) | 190 |
| Pole Width (in) | 4 |
| Pole Bolt Circle (in) | 8 |
| Pole Finish | Hot Dip Galvanized and Powder Coated |
| Pole Color | Bronze | White |
| Pole Gauge | 11 |
| Bolt Projection (in) | 2.75 |
| Pole Installation | Anchor Base |
| Includes | 2 3/8 Inch Tenon |
| Warranty | 1 year |
| EPA at 70 mph | 8.9 |
| EPA at 80 mph | 6.9 |
| EPA at 90 mph | 5.7 |
| EPA at 100 mph | 4.1 |
| EPA at 110 mph | 3.6 |
| EPA at 120 mph | 2.2 |
Disclaimer: LED Lighting Supply is not responsible for improper loading of light fixtures or other attachments, use, or foundation design of light poles. Final pole assembly is the responsibility of the purchaser. Dimensions and specifications of a 25 foot steel square light pole are subject to change without notice. See the data sheet for current pole data charts. Custom sizing is only available for large order quantities.
Please be advised that our steel poles are covered solely by a 1-year workmanship warranty, which ensures that the poles are free from defects from the manufacturing process, such as welds and structural integrity, for a period of one year from the date of purchase. This warranty does not cover damage resulting from external factors, misuse, or normal wear and tear.
Product SKU Variations
- SKU: MLLG-WL-POLE-25FT-4-SQ-BZ-TN
- SKU: MLLG-WL-POLE-25FT-4-SQ-WH-TN
Additional Resources
Product Overview
This 25-foot square steel light pole provides an anchor-base support structure for exterior lighting fixtures with a 2 3/8-inch tenon mount. The pole has a 4-inch square profile and an 11-gauge steel construction.
The hot dip galvanized and powder coated finish is available in bronze or white. Its 25-foot total height suits site lighting layouts that require elevated fixture placement without using a taller pole structure.
Core Performance and Output
Structural performance is defined by the pole’s effective projected area ratings. The pole is rated for 8.9 EPA at 70 mph, 6.9 EPA at 80 mph, 5.7 EPA at 90 mph, 4.1 EPA at 100 mph, 3.6 EPA at 110 mph, and 2.2 EPA at 120 mph.
Fixture selection must remain within the applicable EPA limit for the project wind speed. Higher wind-speed locations reduce the available EPA capacity for the fixture and mounting configuration.
Adjustability and Control Options
This pole uses a fixed 2 3/8-inch tenon for top-mounted fixture installation. It does not include lighting controls, dimming equipment, or field-adjustable pole height.
Fixture aiming, optics, and controls are determined by the luminaire installed on the tenon. The pole itself provides the structural mounting point.
Longevity and Reliability
The steel pole has a hot dip galvanized and powder coated finish for exterior installation. This finish combination protects the steel structure and provides the specified bronze or white appearance.
The pole includes a 1-year warranty. Long-term performance depends on maintaining the finish and verifying that installed fixture EPA remains within the applicable wind-load rating.
Build Quality and Physical Characteristics
The pole is constructed from 11-gauge steel and weighs 190 pounds. Its square shaft measures 4 inches wide.
The anchor-base configuration has an 8-inch bolt circle and 2.75-inch bolt projection. A 2 3/8-inch tenon is included for fixture mounting.
Where This Product Fits Best
This pole fits exterior site lighting installations that use a 25-foot steel support structure and a tenon-mounted fixture. Application fit depends on fixture EPA, local wind conditions, and the required lighting layout.
- parking lot lighting
- roadway lighting
- commercial site lighting
- area lighting
- campus lighting
- dealership lighting
The galvanized and powder coated steel construction is intended for exterior pole installations. Wind-speed requirements must be checked against the pole EPA rating before finalizing the fixture configuration.
Installation and Long-Term Use
This pole installs through its anchor base using the specified 8-inch bolt circle. The 25-foot total height and 190-pound pole weight should be accounted for during handling, placement, and fixture installation.
Confirm the anchor-base layout, fixture EPA, and project wind-speed requirement before installation. The tenon supports a top-mounted fixture configuration, while fixture wiring and controls are determined by the selected luminaire.
How This Fixture Is Commonly Used
The 25-foot pole height places the mounted fixture above the lighting area for parking lot lighting, roadway lighting, area lighting, commercial site lighting, campus lighting, and dealership lighting. Fixtures are generally arranged along travel paths, site perimeters, or open paved areas according to the required lighting layout.
Pole spacing and fixture count vary with the luminaire output, optics, target light levels, and site geometry. A larger fixture EPA may require a lower EPA configuration where project wind speed is higher.
Safety, Certifications, and Warranty
The pole has an anchor-base installation configuration, an 8-inch bolt circle, and 2.75-inch bolt projection. The installed fixture and mounting arrangement must remain within the listed EPA rating for the applicable wind speed.
This steel light pole includes a 1-year warranty.
Frequently Asked Questions
Q: What is the total height of this steel light pole?
A: The pole has a total height of 25 feet.
Q: What fixture mount is included with the pole?
A: The pole includes a 2 3/8-inch tenon.
Q: What is the EPA rating at 90 mph?
A: The EPA rating is 5.7 at 90 mph.
Q: What information is needed to plan fixture placement on this pole?
A: Fixture EPA, project wind speed, lighting layout, luminaire output, optics, and target light levels affect pole placement planning.
Application Questions and Clarification
Q: Can this pole be used for parking lot lighting and roadway lighting?
A: Parking lot lighting and roadway lighting are valid applications when the fixture configuration remains within the applicable EPA rating.
Q: What should be checked for campus lighting or dealership lighting?
A: Confirm the project wind speed and the EPA of the selected fixture configuration. The pole EPA rating ranges from 8.9 at 70 mph to 2.2 at 120 mph.
Q: Does the pole include lighting controls?
A: No lighting controls are listed for this pole. Controls are determined by the installed fixture.
Web ID: 1916
