60 Watt Explosion Proof Linear LED Light | 7800 Lumens | Class 1 Div 2 | 5000K | 100-277V | 4 Foot
Dwayne Kula | President, CTO and Founder
105 in stock
Product Specifications
UL Specs
- UL844 Hazardous Locations
- Class 1 Division 2: Group A,B,C,D
- Wet Locations (UL 1598)
Key Features
| Brand | LED Lighting Supply |
| Watts | 60 |
| Lumens | 7800 |
| Lumens Per Watt | 130 |
| Replaces | 250 Watt Metal Halide |
| Voltage | 100V-277V |
| Color Temperature | 5000K |
| CRI | 70+ |
| Dimming | No |
| Beam Angles (Std) | 120° |
| Lifespan | 50,000 (L70) hours |
| Mounting | Bracket or Surface or Wall |
| Frequency (Hz) | 50-60Hz |
| Power Factor | >.95 |
| THD | < 10% |
Durable Construction
| Housing | Die-Cast Aluminum |
| IP Rating | IP66 |
| Surge Protection | 4kV |
| Operating Temperature | -22°F to 122°F |
| Certifications | UL | Rebate Eligible |
| Warranty | 5 years |
Measurements
| Dimensions (in) | 48.4 x 4.9 x 3.5 |
| Weight (lbs) | 17 |
Product Lighting Layout Estimator
Use this estimator to calculate approximate fixture count, spacing, and average foot-candles for a simple rectangular space using the selected LED fixture. Enter your room dimensions, mounting height, target foot-candles, light loss factor, and room/layout condition to generate a preliminary lighting layout. When IES photometry is available, workplane height and room reflectance controls are shown.
Project Inputs
Estimated Results
Estimated average foot-candles are preliminary and should be verified with a lighting plan for project-critical applications.
Room / Layout Condition: This field is used only when usable IES photometry is not available. In fallback mode, it acts as a simplified room utilization factor for reflectance, fixture distribution, racking, obstructions, and how much fixture light reaches the work area. Open / light-colored spaces use 0.90, typical warehouses or shops use 0.75, racked or obstructed spaces use 0.60, and dark or complex spaces use 0.45. When IES photometry is active, this field is hidden and the estimator uses the selected workplane height, LLF, and simplified reflectance adjustment instead.
Photometry / Simulation Note: When usable IES photometry is available for the selected fixture, this estimator uses the fixture’s IES candela data, selected workplane height, light loss factor, and simplified reflectance adjustment to estimate fixture count, average foot-candles, and visual light distribution. The reflectance adjustment is a conservative approximation and is not a full zonal-cavity, radiosity, or professional photometric room calculation. When IES photometry is not available, the estimator uses a simulated beam model based on lumens, mounting height, room/layout condition, light loss factor, and beam angle.
Preliminary Estimate Only: This estimator is intended for simple square or rectangular spaces and should be used as a planning aid, not a final photometric lighting plan. Actual light levels may vary based on fixture optics, selected IES file, mounting conditions, workplane height, ceiling height, surface reflectance, obstructions, controls, voltage, installation conditions, and site-specific requirements. Project-critical applications should be verified with a formal lighting plan.
This estimate is a starting point. Warehouses, industrial facilities, hazardous locations, sports areas, schools, healthcare spaces, public areas, and code-sensitive projects may require a reviewed lighting layout before purchase or installation.
Product Overview
This 4-foot explosion proof linear LED light delivers 7,800 lumens at 60 watts with a 5000K color temperature. It is designed for Class I Division 2 hazardous locations in Groups A, B, C, and D, including hazardous location lighting and paint booth lighting.
The fixture operates on 100-277V and provides a 120-degree beam angle for broad linear illumination. It is rated as a replacement for 250 watt metal halide fixtures.
Core Performance and Output
The 60W LED system produces 130 lumens per watt with a CRI of 70+. Its 5000K output provides a cool white light for task visibility in industrial and hazardous-location environments.
This fixture is non-dimming and operates at 50-60Hz with a power factor greater than 0.95 and THD below 10%.
Longevity and Reliability
The LED light engine has a 50,000-hour L70 rated life. The fixture includes 4kV surge protection and is rated for operation from -22 degrees F to 122 degrees F.
An IP66 rating and UL 1598 wet location classification support use where the fixture may be exposed to wet conditions.
Build Quality and Physical Characteristics
The die-cast aluminum housing measures 48.4 x 4.9 x 3.5 inches and weighs 17 pounds. Bracket, surface, and wall mounting configurations are available.
Where This Product Fits Best
This linear hazardous-location fixture is suited to locations requiring Class I Division 2 Group A-D lighting and a compact 4-foot form factor.
- hazardous location lighting
- explosion proof lighting
- paint booth lighting
- chemical processing facility lighting
- oil and gas facility lighting
- refinery lighting
Safety, Certifications, and Warranty
This fixture is UL 844 listed for hazardous locations and classified for Class I Division 2 Groups A, B, C, and D. It is also UL 1598 wet location rated, IP66 rated, UL certified, and rebate eligible. The warranty is 5 years.
Frequently Asked Questions
Q: Is this 60W explosion proof linear light dimmable?
A: No. This 60W explosion proof linear LED light is non-dimming.
Q: What hazardous location classification does this fixture have?
A: This explosion proof linear LED light is UL 844 listed for Class I Division 2 hazardous locations in Groups A, B, C, and D.
Q: What mounting options are available for this linear fixture?
A: This 4-foot explosion proof linear LED light supports bracket, surface, or wall mounting.
Web ID: 1898