80 Watt LED Wall Pack | 12174 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Emergency Battery Backup

Product Overview

This 80 watt LED wall pack delivers 12,174 lumens at 152 lumens per watt and replaces 250 watt metal halide fixtures. The fixture includes field-adjustable color temperature with 3000K, 4000K, and 5000K options, allowing color selection during installation without returning to stock.

An integrated emergency backup battery provides backup illumination during power loss. The die-cast aluminum housing is finished in bronze and carries an IP65 rating for wet location use. Voltage compatibility spans 100V to 277V at 50-60Hz.

The fixture supports 1-10V dimming and produces a 120-degree beam spread through a polycarbonate lens. Rated lifespan is 50,000 hours at L70. Overall dimensions measure 14.2 inches long by 9.5 inches wide by 7.6 inches high, with a weight of 7.9 pounds.

Where This Product Fits Best

This wall pack is sized for perimeter lighting on commercial and industrial buildings where 250 watt metal halide fixtures are currently installed. The 12,174 lumen output and 120-degree beam spread suit building entrances, loading dock areas, rear security walls, and parking lot perimeters.

The IP65 rating allows installation in locations exposed to rain, snow, and hose-down spray. Operating temperature range of -40 degrees F to 122 degrees F supports year-round outdoor use in most climate zones. The emergency backup battery makes this fixture appropriate for egress paths and areas requiring code-compliant emergency lighting.

Color-adjustable output allows the same fixture to work across different facility standards or tenant requirements without changing hardware.

Performance and Functional Considerations

At 80 watts producing 12,174 lumens, this fixture achieves 152 lumens per watt. CRI is rated at 70 or higher, which is standard for security and general area lighting where color accuracy is not critical.

The 1-10V dimming capability allows integration with building management systems or compatible wall dimmers for occupied-level adjustments. Power factor exceeds 0.90 and total harmonic distortion remains below 20 percent, meeting typical electrical system requirements.

The polycarbonate lens provides impact resistance while maintaining light transmission across the 120-degree beam pattern. Rated lifespan of 50,000 hours at L70 means the fixture retains at least 70 percent of initial output through that service period.

Installation and Long-Term Use

This fixture mounts directly to vertical wall surfaces. The 7.9 pound weight and 14.2 by 9.5 by 7.6 inch footprint require standard wall pack mounting hardware and junction box compatibility. Voltage input accepts 100V through 277V without manual tap selection.

Color temperature is selected on the fixture during installation. The three settings of 3000K, 4000K, and 5000K cover warm through cool white output. Once set, the fixture operates at that color temperature until physically changed.

The die-cast aluminum housing resists corrosion in outdoor environments. The bronze finish blends with common commercial building exteriors. The IP65 rating confirms the enclosure prevents dust ingress and withstands water jets from any direction.

How This Fixture Is Commonly Used

Facility operators use this wall pack where existing 250 watt metal halide fixtures create maintenance burden or excessive energy consumption. The retrofit maintains or improves light output while reducing wattage from 250 to 80.

The field-adjustable color temperature lets installers match existing site lighting or adjust based on end user preference without swapping fixtures. Buildings with mixed tenant areas or phased lighting upgrades benefit from this flexibility.

The emergency backup battery activates automatically during power interruption, providing egress illumination in stairwells, exits, and code-required emergency paths. Maintenance personnel do not need separate emergency fixtures in areas where this wall pack is installed.

The 1-10V dimming input allows the fixture to respond to external controls for scheduled dimming, daylight response, or occupancy-based adjustments when connected to compatible control systems.

Safety, Certifications, and Warranty

This fixture is UL listed and rebate eligible. The IP65 rating confirms protection against dust and water spray in outdoor and wet location installations.

We provide a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this wall pack accept?
The fixture operates on 100V to 277V input at 50-60Hz without manual voltage selection.

What is the lumen output?
This fixture produces 12,174 lumens at 80 watts.

Is this fixture rebate eligible?
Yes, this wall pack is rebate eligible. Contact your local utility for program requirements.

What color temperatures are available?
The fixture is field-adjustable between 3000K, 4000K, and 5000K.

What is the IP rating?
IP65. The fixture is sealed against dust and protected from water jets, suitable for outdoor wet locations.

Does this fixture include dimming capability?
Yes, the fixture supports 1-10V dimming when connected to a compatible dimmer or control system.

What is the warranty period?
This fixture carries a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.