30 / 40 / 50 Watt Adjustable LED Wall Pack | 4500 to 7500 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V | Built-In Photocell

Product Overview

This adjustable LED wall pack delivers 4500 to 7500 lumens across three selectable wattage settings: 30, 40, or 50 watts. At 150 lumens per watt, the fixture provides direct replacement capability for 150 to 250 watt metal halide wall packs. The built-in photocell enables dusk-to-dawn operation without additional controls or wiring.

Color temperature is field-selectable between 3000K, 4000K, and 5000K, allowing adjustment to match existing site lighting or architectural preferences. The fixture operates on 100-277V input, supports 1-10V dimming, and carries UL listing with rebate eligibility. A five-year warranty covers the unit.

Where This Product Fits Best

This wall pack is sized for building perimeters, loading docks, service entrances, parking structure walls, and similar exterior mounting locations where 150 to 250 watt metal halide fixtures are currently installed. The 110-degree Type 4 beam pattern throws light outward and to the sides, which suits pathway edges, building facades, and areas where forward throw without excessive backlight is needed.

The operating temperature range of -40°F to 122°F supports installations in cold-climate loading areas, hot equipment yards, and unconditioned spaces. IP65 rating allows direct exposure to rain, snow, dust, and hose-down cleaning. Die-cast aluminum housing and tempered glass lens hold up in high-traffic commercial and industrial environments.

Performance and Functional Considerations

Output scales directly with wattage selection: 30 watts produces 4500 lumens, 40 watts produces 6000 lumens, and 50 watts produces 7500 lumens. The 150 lumens per watt efficiency remains constant across all settings. CRI is rated at 70+, which is standard for exterior security and general area lighting where color accuracy is not critical.

The 1-10V dimming input allows integration with building management systems or standalone dimmer controls. Power factor exceeds 0.90 and THD remains below 20%, which keeps electrical system impact low on commercial circuits. Rated lifespan is 50,000 hours at L70, meaning the fixture retains at least 70% of initial output at that point.

Installation and Long-Term Use

The fixture mounts directly to vertical wall surfaces. Dimensions are 14 x 9 x 7.12 inches with a weight of 8.5 pounds. Bronze finish matches common commercial exterior hardware and provides visual continuity on building facades.

Wattage and color temperature are adjusted at installation using onboard selectors. Once set, the fixture operates at that configuration until physically changed. The built-in photocell automates on/off switching based on ambient light, eliminating the need for timers or external sensors for basic dusk-to-dawn scheduling.

How This Fixture Is Commonly Used

Facilities use the wattage selector to match output to specific wall locations. A 30-watt setting works for secondary exits or low-traffic areas, while 50 watts handles main loading dock faces or high-security zones. This allows a single fixture type to serve multiple roles across a property without over-lighting or under-lighting individual positions.

Color temperature selection typically follows site standards or tenant preferences. Warmer 3000K output suits retail storefronts and hospitality entrances. Cooler 5000K output is common on industrial and warehouse exteriors where visibility and alertness are priorities. The 4000K middle option works where neutrality is preferred or existing lighting falls between warm and cool.

Safety, Certifications, and Warranty

This fixture is UL listed and rebate eligible. IP65 rating allows exposure to water jets and dust ingress typical of exterior commercial environments. The five-year warranty is provided by LED Lighting Supply.

Operating temperature range spans -40°F to 122°F, covering installations in northern climates, southern heat, and interior spaces without climate control.

Frequently Asked Questions

What metal halide wattage does this replace?
This fixture replaces 150 to 250 watt metal halide wall packs depending on the wattage setting selected.

What voltage does this fixture accept?
The fixture operates on 100-277V input at 50-60Hz.

Is this fixture dimmable?
Yes. The fixture supports 1-10V dimming.

Is the photocell built in or separate?
The photocell is built into the fixture.

What is the IP rating?
IP65. The fixture tolerates direct water spray and dust exposure in outdoor installations.

Is this fixture eligible for utility rebates?
Yes. The fixture is listed as rebate eligible.

What warranty coverage applies?
LED Lighting Supply provides a five-year warranty on this fixture.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.