60 Watt LED Shoebox Area Light | 8400 Lumens | 5000K | 100-277V | Type 3

Product Overview

This 60 Watt LED Shoebox Area Light delivers 8,400 lumens at 5000K with a Type 3 distribution. It is designed for use on 100-277V circuits and supports 1-10V dimming. The fixture is built with a die-cast aluminum housing and a polycarbonate lens.

The unit is rated for 50,000 hours (L70) and offers a color rendering index of 80+. It is finished in bronze and weighs 7.8 lbs, with overall dimensions of 17 x 12 x 4.2 inches.

Mounting options include arm, slip fitter, or trunnion. The fixture includes a photocell and provides an EPA rating of 1 for wind load considerations.

It carries UL certification and is rebate eligible. The fixture is rated IP66 and includes 4 kV surge protection.

Where This Product Fits Best

This fixture is suited for outdoor area lighting applications where a Type 3 distribution is required. Typical installations include parking lots, perimeter areas, and drive lanes.

It is intended to replace 250 or 400 watt metal halide fixtures. The 5000K color temperature supports visibility in exterior environments.

The IP66 rating allows use in locations exposed to rain, dust, and other challenging weather conditions. The fixture?s die-cast aluminum construction supports use in environments where durability is required.

Mounting flexibility allows adaptation to existing poles or structures using arm, slip fitter, or trunnion hardware.

Performance and Functional Considerations

The fixture outputs 8,400 lumens at 140 lumens per watt. It operates on 100-277V input and supports 50-60Hz frequency. Power factor is .9 and total harmonic distortion is 15%.

Type 3 optics provide lateral light distribution suitable for roadway and area lighting. The polycarbonate lens is impact resistant and supports long-term optical clarity.

1-10V dimming is supported for integration with compatible controls. The included photocell enables dusk-to-dawn operation where required.

Surge protection is rated at 4 kV. The EPA rating of 1 should be considered when evaluating wind load on poles or mounting structures.

Installation and Long-Term Use

The fixture supports arm, slip fitter, or trunnion mounting. This allows adaptation to a range of pole types and mounting surfaces.

At 7.8 lbs and with a compact form factor, the fixture can be handled by one person during installation. The die-cast aluminum housing resists corrosion and physical impact.

The IP66 rating allows for installation in areas exposed to direct water spray, dust, and debris. The fixture is suitable for year-round outdoor use in most climates.

With a rated lifespan of 50,000 hours (L70), the fixture is designed for long-term operation with minimal maintenance. The polycarbonate lens can be cleaned as needed to maintain light output.

How This Fixture Is Commonly Used

Once installed, this fixture provides consistent area illumination with a Type 3 distribution pattern. The 5000K color temperature supports clear visibility for vehicles and pedestrians.

The included photocell allows the fixture to operate automatically based on ambient light, reducing manual intervention. Dimming can be managed through a compatible 1-10V control system if required for site-specific needs.

The fixture?s construction and IP66 rating allow it to be relied on in outdoor environments where exposure to rain, dust, and debris is expected. The die-cast aluminum housing and polycarbonate lens support durability over time.

Routine maintenance is limited to periodic cleaning of the lens and inspection of mounting hardware. The fixture is designed for stable, long-term operation in exterior area lighting applications.

Safety, Certifications, and Warranty

This fixture is UL listed and rebate eligible.

It is rated IP66 for protection against water and dust ingress. The fixture includes 4 kV surge protection for electrical safety in outdoor installations.

The housing is constructed from die-cast aluminum for impact resistance and corrosion protection. The polycarbonate lens is designed to withstand physical contact and environmental exposure.

LED Lighting Supply provides a warranty as stated in the product documentation.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100-277V input.

What is the lumen output?
The fixture delivers 8,400 lumens.

What is the environmental rating?
This fixture is rated IP66 for protection against water and dust.

What mounting options are available?
Mounting options include arm, slip fitter, or trunnion.

Is this fixture UL listed?
Yes, this fixture is UL listed.

Is this fixture eligible for rebates?
Yes, this fixture is rebate eligible.

What is the warranty coverage?
LED Lighting Supply provides a warranty as stated in the product documentation.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.