150 Watt LED Shoebox Area Light | 19500 Lumens | 5000K | 100V-277V or 277-480V

Product Overview

This 150 Watt LED Shoebox Area Light delivers 19,500 lumens at 5000K. It is designed for outdoor area and site lighting applications where a 400 Watt metal halide replacement is required.

The fixture operates on either 100V-277V or 277V-480V input, supporting a wide range of commercial and industrial electrical systems. It features a die-cast aluminum housing and a polycarbonate lens for durability in demanding environments.

Standard output is 130 lumens per watt, with a CRI of 70+. The fixture supports 1-10V dimming and is available with Type 3 optics for roadway and area distribution.

Fixture dimensions are 20.19 inches long, 13.11 inches wide, and 6.61 inches high. Weight is 12 pounds. The finish is bronze.

Where This Product Fits Best

This area light is suited for parking lots, roadways, walkways, and perimeter lighting where pole-mounted fixtures are required. It is also used in commercial and industrial exterior spaces needing consistent, high-output illumination.

The fixture is appropriate for new installations or as a direct replacement for legacy 400 Watt metal halide shoebox lights. It is compatible with both standard and high-voltage electrical systems.

With an IP65 rating, the fixture is suitable for outdoor environments exposed to rain, dust, and temperature fluctuations. The die-cast aluminum housing supports long-term use in locations with wind, debris, and physical impact risks.

Multiple mounting options?yoke, arm, or slip fitter?allow for installation on a variety of pole types and tenon sizes.

Performance and Functional Considerations

The 19,500 lumen output provides high visibility for large exterior areas. Type 3 optics distribute light broadly, supporting roadway and parking lot layouts.

1-10V dimming allows for integration with compatible lighting controls. The fixture operates at a power factor of 0.9 and a total harmonic distortion of 15%.

The EPA rating of 1.3 should be considered when evaluating pole and mounting hardware for wind load compatibility. The fixture is rated for operation in ambient temperatures from -40°F to 113°F.

Lifespan is rated at 50,000 hours (L70), supporting long maintenance intervals in high-use environments.

Installation and Long-Term Use

The fixture supports yoke, arm, or slip fitter mounting. This allows for attachment to square or round poles, tenons, or wall surfaces as required by site conditions.

At 12 pounds, the fixture can be handled by a single installer, but secure mounting is required to meet wind and vibration demands. The die-cast aluminum housing resists corrosion and impact.

IP65 protection allows for installation in exposed outdoor locations without additional weatherproofing. The polycarbonate lens is impact-resistant and supports long-term optical clarity.

Routine maintenance is limited to periodic cleaning of the lens and inspection of mounting hardware. No lamp or ballast replacements are required over the rated life.

How This Fixture Is Commonly Used

Once installed, this fixture provides consistent area lighting with minimal adjustment required. The Type 3 distribution pattern covers roadways and parking areas evenly, reducing dark spots and glare.

If dimming is used, you can adjust light levels through a compatible 1-10V control system. The fixture maintains stable output across the full voltage range, so performance does not fluctuate with supply variations.

The polycarbonate lens can be wiped down as needed to maintain light output. The fixture?s sealed design prevents water and dust ingress, so it continues to operate reliably in outdoor conditions.

Mounting hardware selection at installation determines the fixture?s orientation and coverage. After installation, no further aiming or adjustment is typically required unless site conditions change.

Safety, Certifications, and Warranty

This fixture is UL listed.

The product is rebate eligible.

IP65 rating allows use in wet and dusty outdoor environments.

LED Lighting Supply provides a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on either 100V-277V or 277V-480V input.

What is the light output?
The fixture delivers 19,500 lumens at 150 watts.

What mounting options are available?
Mounting options include yoke, arm, or slip fitter.

What certifications does this fixture carry?
This fixture is UL listed and rebate eligible.

What is the warranty period?
LED Lighting Supply provides a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.