30 / 50 / 75 / 100 Watt Adjustable LED Canopy Light | 4200 to 14000 Lumens | 3000K / 4000K / 5000K Adjustable | 100-277V

Product Overview

This is an adjustable LED canopy light designed for commercial and industrial overhead applications. Output can be set to 30, 50, 75, or 100 watts, delivering between 4200 and 14000 lumens. Color temperature is selectable between 3000K, 4000K, and 5000K.

The fixture operates on 100-277V input and is built with a die-cast aluminum housing and a polycarbonate lens. It is rated for 100,000 hours (L70) and has a CRI of 70+. The fixture is white and measures 12.7 inches in diameter by 3.5 inches in height, weighing 6 lbs.

Beam angle is 120 degrees. The fixture supports both pendant and surface mounting. Power factor is greater than 0.90, and total harmonic distortion is less than 20%.

Motion sensor functionality is available. The fixture is IP65 and IK08 rated, with 10kV surge protection and an operating temperature range of -22°F to 113°F.

Where This Product Fits Best

This LED canopy light is suited for covered outdoor and indoor locations where overhead lighting is required. Typical applications include gas stations, parking garages, and commercial canopies.

The adjustable wattage and color temperature allow adaptation to a range of lighting needs and site conditions. The fixture is intended as a replacement for 250W or 400W metal halide canopy lights.

IP65 and IK08 ratings support use in environments exposed to dust, water jets, and moderate physical impact. The fixture is suitable for locations where durability and weather resistance are required.

Performance and Functional Considerations

The fixture delivers up to 140 lumens per watt, supporting energy-efficient operation. Output can be set to four wattage levels, allowing adjustment for required brightness or energy use.

Selectable color temperature provides flexibility for visual comfort or site-specific requirements. The 120-degree beam angle offers broad, even coverage under canopies or in open ceiling areas.

Power factor above 0.90 and THD below 20% support compatibility with commercial electrical systems. The fixture operates on 100-277V, covering most standard commercial and industrial power supplies.

10kV surge protection is built in for locations with exposure to electrical disturbances. The fixture is rated for operation in temperatures from -22°F to 113°F.

Installation and Long-Term Use

The fixture supports both pendant and surface mounting, allowing adaptation to existing canopy structures or ceiling types. The die-cast aluminum housing and polycarbonate lens are designed for durability in demanding environments.

IP65 rating allows use in locations exposed to dust and water jets, such as outdoor canopies or parking structures. IK08 rating provides resistance to moderate impact from incidental contact or vandalism.

The fixture is designed for long service life, with an L70 rating of 100,000 hours. Maintenance requirements are minimized due to the sealed construction and robust housing.

Motion sensor functionality is available for applications where occupancy-based control is needed. The fixture weighs 6 lbs, which supports straightforward handling during installation.

How This Fixture Is Commonly Used

After installation, the adjustable wattage and color temperature allow you to set the fixture to match site lighting requirements or visual preferences. Adjustments can be made during commissioning or as needs change over time.

The fixture is typically relied on for consistent, broad illumination in covered outdoor or indoor areas. The 120-degree beam angle provides wide coverage, reducing shadowing under canopies or in parking structures.

Once installed, the fixture operates with minimal interaction. The sealed housing and impact-resistant lens reduce the need for routine maintenance. Motion sensor functionality can be used where occupancy-based lighting is desired.

In day-to-day operation, the fixture maintains stable output and color, supporting safety and visibility in commercial and industrial environments.

Safety, Certifications, and Warranty

This fixture is ETL listed and DLC Premium qualified.

IP65 rating allows use in environments exposed to dust and water jets. IK08 rating provides resistance to moderate physical impact.

10kV surge protection is built in. The fixture is covered by a 5-year warranty from LED Lighting Supply.

Frequently Asked Questions

What voltage does this canopy light support?
This fixture operates on 100-277V.

What are the available wattage and lumen output settings?
Wattage can be set to 30, 50, 75, or 100 watts, with corresponding lumen outputs of 4200, 7000, 10500, or 14000 lumens.

What mounting options are supported?
The fixture supports pendant and surface mounting.

What environmental ratings does this fixture carry?
This fixture is IP65 and IK08 rated.

What certifications does this fixture have?
This fixture is ETL listed and DLC Premium qualified.

What is the warranty period?
The fixture is covered by a 5-year warranty from LED Lighting Supply.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.