25 Foot Fiberglass Flag Pole | 6.5 Inch Diameter | Internal Halyard | Anchor Base | Rated for 125 MPH

Product Overview

This 25-foot fiberglass flag pole features a round tapered profile with a 6.5-inch outside diameter at ground level tapering to 3 inches at the tip. The pole is white and weighs 61 pounds. It uses an internal halyard system with a #10 (5/16-inch) halyard and internal cam cleat for flag line management.

The pole is designed for anchor base installation and carries an unflagged wind rating of 125 mph. A 6-inch gold ball is included. The standard flag size for this pole is 4 x 6 feet.

Anchor bolts and base cover are not included with this pole and must be obtained separately. The anchor bolt specification calls for 24-inch bolts with 3/4-inch diameter, 2.75-inch projection, and a bolt circle of 9 to 11 inches. The base plate measures 10.24 x 10.24 inches.

Where This Product Fits Best

This pole is appropriate for sites requiring a 25-foot flag display where fiberglass construction is preferred over aluminum or steel. Fiberglass does not conduct electricity, making it suitable for locations where contact with overhead power lines is a concern or where non-conductive materials are specified.

The 125 mph wind rating applies to the unflagged condition. Facilities in high-wind regions should verify that this rating aligns with local code requirements and site-specific wind exposure. Flag loading reduces effective wind tolerance, so flag size and wind conditions should be considered together.

The internal halyard design keeps the flag line enclosed within the pole shaft, which reduces external hardware, limits halyard noise, and restricts unauthorized access to the flag mechanism.

Performance and Functional Considerations

The round tapered shape provides structural rigidity while reducing weight toward the tip. At 61 pounds total, this pole is lighter than comparable steel poles and easier to handle during installation.

The internal cam cleat secures the halyard inside the pole at the base. This cleat style locks the line in position without requiring external tie-off hardware. Access to the cleat is at ground level through an opening in the pole shaft.

The 4 x 6 foot flag size is the standard recommendation for this pole height. Larger flags increase wind load and may exceed the pole''s structural limits in elevated wind conditions.

Installation and Long-Term Use

This pole requires an anchor base foundation. The base plate accepts bolts on a 9 to 11-inch bolt circle. Anchor bolts must be 24 inches in length with 3/4-inch diameter and 2.75-inch projection above the concrete surface. These bolts are sold separately.

Fiberglass resists corrosion, does not rust, and does not require painting or refinishing under normal conditions. The white finish is integral to the material and holds up in UV exposure without the oxidation common to bare aluminum.

The internal halyard should be inspected periodically for wear or fraying. Replacement halyard can be fed through the pole shaft from the tip opening. The cam cleat mechanism is accessible from the base for adjustment or service.

How This Fixture Is Commonly Used

Once installed, the flag is raised and lowered using the internal halyard line accessed at the base of the pole. The cam cleat holds the line in place without knots or external cleats. Lowering the flag releases the cleat by pulling the line at an angle to disengage the locking cams.

Because the halyard is enclosed, flag changes and adjustments are made entirely at ground level without climbing or external rigging. This simplifies routine flag replacement and seasonal display changes.

The 6-inch gold ball at the tip is a standard ornamental finial. It threads onto the pole tip and can be removed if a different finial style is preferred.

Safety, Certifications, and Warranty

This flag pole carries a 15-year warranty from LED Lighting Supply.

The 125 mph wind rating is based on unflagged conditions. Flying a flag in high winds reduces the effective wind tolerance of the pole. Flag size and local wind exposure should be evaluated during site planning.

Frequently Asked Questions

What anchor bolts are required?
The pole requires 24-inch anchor bolts with 3/4-inch diameter, 2.75-inch projection, and a bolt circle between 9 and 11 inches. Anchor bolts are sold separately.

What flag size fits this pole?
The standard flag size is 4 x 6 feet.

What is the wind rating?
The pole is rated for 125 mph in the unflagged condition.

Is the base cover included?
No. The base cover is sold separately.

What is the warranty?
This pole includes a 15-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.