240 Watt Round Explosion Proof LED Light | 33600 Lumens | Class 1 Div 2 | 5000K | 100-277V | Optional 10 Year Warranty

Product Overview

This 100 Watt Explosion Proof LED Light delivers 15,000 lumens at 5000K. It is designed for hazardous locations requiring Class 1 Division 2 and Class 2 Division 2 protection. The fixture is suitable for both indoor and outdoor use.

The light operates on 100V-277V and features a trunnion mount for flexible installation. It uses a tempered glass lens and provides a 120° beam angle. The fixture is built for environments where durability and safety are required.

It replaces 400 Watt metal halide systems and is rated for a lifespan of 244,000 (L70) hours. The fixture weighs 32 lbs and measures 22 x 18 inches.

Certifications include ETL, UL844, CSA, ATEX, and IECEX. The product is covered by a 5-year warranty from LED Lighting Supply.

Where This Product Fits Best

This fixture is intended for hazardous locations classified as Class 1 Division 2, Class 2 Division 1, Class 2 Division 2, and Class 3. It is suitable for areas where flammable gases, vapors, or combustible dusts may be present under abnormal conditions.

It can be used in wet locations and environments requiring UL 1598 / UL1598A compliance. The fixture is appropriate for both indoor and outdoor applications where explosion proof lighting is required.

Common installation sites include manufacturing plants, chemical processing facilities, refineries, and storage areas with hazardous materials. The trunnion mount allows for wall, ceiling, or surface mounting as needed.

The fixture is compatible with electrical systems operating between 100V and 277V at 50-60Hz.

Performance and Functional Considerations

This fixture provides 15,000 lumens at 100 watts, delivering 150 lumens per watt. It is designed to replace 400 Watt metal halide fixtures in hazardous environments.

The 5000K color temperature produces a neutral white light suitable for task visibility. The CRI is 70+, supporting general industrial applications.

The fixture is rated IP66, allowing it to withstand high-pressure water jets and dust ingress. The IK08 rating means it can tolerate moderate impact in industrial settings.

Power factor is greater than 0.90 and total harmonic distortion is less than 10%. The fixture is non-dimmable.

Installation and Long-Term Use

The trunnion mount provides flexibility for aiming and positioning the fixture as required. The fixture can be angled to direct light where needed.

It is suitable for installation in environments with temperatures ranging from -40°F to 140°F. The tempered glass lens and robust housing support long-term durability in harsh conditions.

The fixture?s 244,000-hour L70 lifespan reduces the need for frequent maintenance or replacement. The 32 lb weight and 22 x 18 inch dimensions should be considered when planning mounting and support.

All necessary certifications for hazardous and wet locations are present, supporting use in regulated environments.

How This Fixture Is Commonly Used

Once installed, this fixture provides consistent, high-output illumination in hazardous areas. The trunnion mount allows you to adjust the fixture?s angle to target specific work zones or equipment.

Operators rely on the fixture for dependable lighting in environments where explosive gases or dusts may be present. The IP66 and IK08 ratings mean you can use this fixture in areas exposed to water, dust, and physical impacts without concern for routine failures.

The 5000K output supports visibility for inspection, maintenance, and production tasks. The fixture?s long lifespan minimizes disruption from lamp changes or fixture replacement.

After installation, day-to-day interaction is limited to periodic inspection and cleaning as required by site protocols. No dimming or control adjustments are needed.

Safety, Certifications, and Warranty

This fixture is ETL listed. It carries UL844, CSA, ATEX, and IECEX certifications.

The fixture is rated for use in Class 1 Division 2, Class 2 Division 1, Class 2 Division 2, and Class 3 hazardous locations. It is suitable for wet locations under UL 1598 / UL1598A.

The product is rated IP66 for water and dust protection. IK08 rating covers resistance to moderate impact.

LED Lighting Supply provides a 5-year warranty on this fixture.

Frequently Asked Questions

What voltage does this fixture support?
This fixture operates on 100V-277V at 50-60Hz.

What is the lumen output and wattage?
The fixture delivers 15,000 lumens at 100 watts.

What environmental ratings does this fixture have?
The fixture is rated IP66 for water and dust protection and IK08 for impact resistance.

What mounting options are available?
This fixture uses a trunnion mount for flexible installation.

What certifications does this fixture carry?
The fixture is ETL listed and carries UL844, CSA, ATEX, and IECEX certifications.

What is the warranty period?
LED Lighting Supply provides a 5-year warranty.

Application Questions and Clarification

This product description reflects the provided specifications, ratings, and configuration options. For questions related to site-specific conditions, electrical compatibility, control integration, or application requirements not addressed in the provided data, our team is available to provide clarification.